Sonzaschool
Rudi

Sekondari ya Kawaida · Kidato cha Tatu · Amali · Agriculture and Food Processing

Animal Health and Production

Feeding fish in cages

takriban dakika 4 kusoma

Majadiliano
Mada za sehemu hiiPerforming smart technologies fish farmingMada 4

Feeding is one of the most important operations in cage fish farming because the fish depend almost entirely on the feed supplied to them. When feeding is done properly, the fish grow faster, stay healthy, and give better yields. Poor feeding leads to slow growth, diseases, and unnecessary losses.

Principles of Feeding Fish in Cages

To ensure successful cage culture, some guiding principles of feeding should always be followed:

  1. Feed at regular times each day to develop a routine.
  2. Provide the correct quantity of feed that the fish can consume.
  3. Use good quality feed that is not spoilt or mouldy.
  4. Record the type and amount of feed given.
  5. Observe the fish while feeding to check their health and feeding response.

Types of Feed for Cage Fish

The fish in cages obtain little natural food from the water; therefore, different kinds of feed must be supplied to support their growth. The feeds used can be grouped into three main types:

  • Natural Feed: This consists of phytoplanktons and zooplanktons that grow naturally in water. While these contribute to fish nutrition, they are usually not enough to support fast growth in cages.
  • Supplementary Feed: This is made up of farm by-products that can be given to fish to add nutrients. Common examples are maize bran, rice bran, and oilseed cakes from sunflower or cottonseed. These feeds are cheap and easy to obtain, but they do not always contain all the nutrients fish require.
  • Complete Feed: This refers to a balanced diet made by mixing different ingredients such as maize bran, fishmeal, sunflower cake, and vitamin-mineral premixes to form pellets. This type of feed supplies all the nutrients fish need and therefore gives the best growth in cages.

Feeding Methods

There are three main methods used to supply feed to fish in cages. The method chosen depends on the type of feed available, the size of the fish, and the resources at hand.

  1. Hand Feeding: In this method, feed is thrown directly into the cage by hand. It is simple and allows the feeder to observe how actively the fish are eating.
  2. Broadcasting: In this method, feed is spread evenly over the water surface of the cage. It enables many of the fish to access the feed at the same time.
  3. Feeding Trays: In this method, feed is placed in trays that are lowered into the cage. This helps to monitor the amount of feed consumed and reduces wastage.

Feeding Frequency and Quantities

The number of times fish are fed and the quantity given will depend mainly on their age, size, and environmental conditions.

  • Frequency: Young fish usually need to be fed three to four times each day because they grow quickly, while adult fish can be fed twice daily.
  • Adjusting Quantities: When water temperatures are very high or very low, fish tend to eat less than usual, so feeding frequency and quantities should be reduced accordingly. If fish finish their feed quickly and show active feeding behaviour, the amount given can be increased slightly. It is important to avoid giving more feed than the fish can consume, since overfeeding leads to waste and pollution of the water.

Tools, Equipment and Precautions

Tools and Equipment:

  • Buckets: For carrying feed to the cages.
  • Weighing Scale: For measuring the correct amount of feed before feeding.
  • Feeding Trays: For holding and controlling the distribution of feed.
  • Protective Clothing: Gumboots, gloves, and overalls.
  • Record Book: For noting the amount of feed given and any observations.

Precautions in Feeding:

  • Do not overfeed the fish; excess feed lowers water quality.
  • Spoiled or mouldy feed should never be used because it can cause diseases.
  • Uneaten feed must be removed after feeding to prevent it from rotting in the water.
  • Feed should always be stored in a clean, dry, and covered place.

Real-life application

In Tanzania, a young entrepreneur setting up a tilapia cage farm near Lake Victoria must carefully manage feeding to make a profit. Using the "complete feed" method (pellets) and feeding the fish twice daily helps the fish reach market size (about 250g) within 6 months. By recording how much feed is used and observing the fish eating, the farmer can calculate the cost of production and ensure the fish are healthy before selling them at the local market for income.

Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa

Tathmini ya mchakato

The students should be able to:

  • Select work equipment, tools, utensils and safety gears
  • Feed fish
  • Keep different records
  • Clean tools, equipment used and work place
  • Store tools and equipment

Tathmini ya matokeo

Feeding fish in cage performed according to the required standards of ratio.

Tathmini ya maarifa

Knowledge evidence:

Detailed knowledge of:

Method used: The student should be able to explain how to feed fish in cages

Principles: The student should outline principles involved in feeding fish in cages

Theories: The student should explain:

  • Types of feed

Circumstantial knowledge: Detailed knowledge

  • Precautions in selection of feeds as looted materials are not recommended

Swali

Which of the following is NOT one of the principles of feeding fish in cages?

Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.

Ingia ili kufanya mazoezi

Mwalimu

Umekwama? Niulize chochote kuhusu mada hii.

Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.

Ingia ili kuuliza

Majadiliano

Hakuna maswali bado

Ingia ili kuuliza
Inapakia majadiliano…