Mada za sehemu hiiPerforming marine farmingMada 4
- Performing crab farming
- Performing shrimp farming
- Performing salmon farming
- Performing seaweed and cucumber farming
Salmon farming is the commercial production of salmon fish in controlled environments such as cages, ponds, or raceways. It involves cultivating salmon from fingerlings (young fish) to market size under managed conditions, providing them with proper feed, water quality, and health care. Salmon are cold-water fish. In nature they hatch in rivers, grow up in the sea and return to rivers to breed, so farms raise the young fish in fresh water and then grow them to market size in net cages in the sea. Salmon cannot live in warm tropical water; the main producers are cold countries such as Norway, Chile, Scotland and Canada.
- Supplies fish that is rich in protein and healthy oils
- Provides jobs on farms and in hatcheries, feed making, processing and transport
- Earns income for farmers and export earnings for producing countries
- Gives a steady supply of fish all year, which reduces pressure on wild salmon
1. Site Selection
A suitable site for salmon farming must have:
- Clean, cold, and well-oxygenated water (temperature ideally between 10–15 °C)
- Good water flow to remove waste and supply oxygen
- Protection from strong winds and flooding
- Easy access for monitoring and harvesting
2. Preparation of Cages or Ponds
- Cage nets or concrete ponds are prepared and placed in the water
- Nets are checked for tears or damage to prevent fish from escaping or predators from entering
- The area is cleared of debris and predators before stocking
3. Stocking of Salmon Fingerlings
- Healthy young salmon are sourced from a hatchery. Fingerlings about 5–10 cm long go into freshwater tanks or raceways; older young fish that are ready for sea water, called smolts, go into sea cages
- Fingerlings are acclimatised by gradually adjusting them to the water temperature of the farm
- They are gently released into the cages or ponds at the recommended stocking density
- The fish must not be crowded: in sea cages the total weight of fish is usually kept below about 25 kg per cubic metre of water
4. Feeding
- Salmon are fed high-protein pellets 2–3 times daily
- Feed quantity is based on the size and number of fish
- Overfeeding is avoided to prevent water pollution and wastage
- Automatic feeders or hand feeding can be used
5. Health Management and Predator Control
- Fish are regularly checked for signs of disease such as lethargy, loss of appetite, or unusual swimming patterns
- Sick fish are isolated and treated promptly, on the advice of a fish health officer or veterinarian
- Vaccination and good water quality help prevent outbreaks
- Parasites such as sea lice are controlled through proper management
- Dead fish are removed every day and disposed of safely
Signs of a sick fish include swimming slowly or on its side near the surface or the net wall, refusing feed, sores or missing scales on the skin, pale or damaged gills, frayed fins and visible parasites.
Predators of caged salmon include seals, otters and fish-eating birds. They are controlled by:
- Covering the cage with a top net to keep out birds
- Keeping the net tight and weighted so that predators cannot push it in and bite the fish
- Hanging a second, stronger predator net outside the cage net where needed
- Removing dead fish promptly, since they attract predators
- Checking the nets regularly for holes
6. Monitoring and Record Keeping
- Daily records are kept in a record book, including:
- Number of fish stocked
- Amount of feed given
- Water temperature
- Mortality rate
- Date of stocking and expected harvest date
7. Harvesting
- Salmon are ready for harvest when they reach market size, usually 3–5 kg, after about 18–24 months in the sea cages
- Harvesting is done by carefully lifting the cage nets or draining ponds
- Fish are gathered using nets, killed quickly and humanely, and placed in clean containers with ice
- Fish are weighed using weighing scales, sorted by size, and prepared for market
- Harvesting is carried out early in the morning when temperatures are cool
The following are needed for salmon farming:
- Buckets – for handling fish and water
- Rakes – for cleaning pond or cage areas
- Cages – for containing fish in the water
- Fishing nets – for stocking and harvesting
- Weighing scales – for measuring fish weight
- Feeds – high-protein fish pellets
- Record books – for documenting farm activities
- Overalls – protective body clothing
- Gumboots – foot protection
- Masks – to protect against inhalation of dust or fumes
- Life jacket – worn by everyone working on cages over deep water
A salmon cage is a large net bag hung in the water from a floating frame.
Types of cages:
- Square or rectangular cage – a frame of timber or steel walkways on floats, often joined together in rows
- Circular cage – a floating ring of strong plastic pipe that bends with the waves; used in open, rougher water
- Fixed cage – a net tied to poles driven into the bottom of shallow, sheltered water
A good design has:
- A floating frame strong enough to carry workers and to resist wind and waves
- A net bag with mesh smaller than the fish, deep enough to give the fish room, and weighted at the bottom to keep its shape
- A top net against birds, and a walkway and handrail for workers
- Mooring ropes and anchors that hold the cage in place in a current
- A position where the bottom of the net stays well clear of the sea bed
Steps in fabricating a small cage:
- Draw the cage with its measurements and list the materials (frame timber or pipe, floats, netting, twine, weights, rope and anchors)
- Measure, cut and join the frame, then fix the floats under it
- Cut the netting and sew the side and bottom panels into a bag with strong twine
- Tie the net bag to the inside of the frame and hang weights at the bottom corners
- Fit the top net
- Launch the cage, moor it with ropes and anchors, and check the net for holes before stocking
- Wear overalls, gumboots and gloves, and wear a mask when handling dusty feed
- Anyone working on cages or in boats should know how to swim and must wear a life jacket; never work alone on the water
- Keep walkways free of ropes, feed bags and fish slime to prevent slipping
- After work, wash buckets, nets, rakes and scales with clean water and dry them in the sun
- Clean and disinfect nets and equipment before moving them from one cage to another, so that disease is not carried across
- Keep feed in a dry, cool store protected from rats; hang nets up and keep tools and record books in a dry, locked place
- Sweep and wash the work area and put waste in the proper place
- Do not overfeed; waste feed and droppings fall under the cages and pollute the water
- Place cages where there is a good current, and do not put too many cages in one place
- Collect dead fish daily and bury them on land, away from water
- Keep nets in good repair so that farmed fish do not escape and mix with wild fish
- Use medicines and chemicals only as advised, and take old nets, ropes and plastic back to land
A fish farm stocks 500 young salmon into a sea cage. The record book shows that 50 fish died during the growing period. After 20 months, the fish are harvested and their total weight is 1,350 kg.
- Number of fish harvested = 500−50=450
- Survival rate = 500450×100%=90%
- Average weight per fish = 1,350 kg÷450=3 kg per fish
This example shows how record keeping and weighing at harvest help a farmer to judge how well the fish survived and grew. Income is found by multiplying the harvest weight by the market price per kilogram.
Salmon is not farmed in Tanzania because the water of the coast and of the great lakes is too warm; salmon sold in hotels and supermarkets is imported from cold countries. The skills, however, are the same ones used in cage farming of tilapia on Lake Victoria and in rearing rainbow trout, a cold-water relative of salmon, in cool highland streams. A young fish farmer near Mwanza who can build a sound cage, feed carefully, check the fish every day and keep proper records of feed, deaths and harvest weights can run a profitable cage farm and plan restocking to ensure a steady income throughout the year.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select work equipment, tools, utensils and safety gears
- Design different types of cages
- Fabricate cages
- Feed fish
- Perform salmon farming
- Control predators
- Identify sick fish
- Keep different records
- Clean tools, equipment used and workplace
- Store tools and equipment
Tathmini ya matokeo
Salmon farming performed according to the required standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should be able to explain how to perform salmon farming
Principles: The student should elaborate principles involved in performing salmon farming
Theories: The student should:
- Explain the importance of salmon farming
- Elaborate proper ways of managing salmon farming
- Outline proper measures for controlling predators and diseases
Circumstantial knowledge:
Detailed knowledge about:
- Precautions on environmental issues
- Skills of swimming
Swali
Which water conditions suit a salmon farm best?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado