Mada za sehemu hiiImproving rangelandMada 5
- Performing reseeding and over sowing
- Making fire barriers
- Removing weeds and bushes
- Creating paddocks
- Locating water points
Reseeding and Over-sowing: Restoring Degraded Rangeland
Reseeding and over-sowing are important practices for rehabilitating degraded rangeland to restore its ecological balance and improve productivity. Reseeding involves planting new seeds in bare patches, while over-sowing means introducing seeds into existing vegetation without disturbing it. These techniques help restore plant communities and improve forage for livestock.
Many rangelands in Tanzania have become degraded due to overstocking, spread of invasive species, climate change and land encroachment. When grazing pressure exceeds the land's capacity, the vegetation cover reduces, soil erosion increases and the rangeland loses its productivity. Reseeding and over-sowing help to:
- Restore plant cover and biodiversity
- Increase forage production for livestock
- Control soil erosion
- Improve the ecological balance of the rangeland
1. Site Assessment
Before starting, conduct a thorough assessment of the rangeland condition:
- Check the soil condition (texture, drainage, fertility)
- Identify existing plant communities
- Look for invasive species that may compete with new plants
- Determine the current vegetation cover percentage
2. Selection of Seeds
Choosing the right seeds is critical for success:
- Select seeds native to the local area because they adapt better to local conditions
- Use high-quality seeds from reliable sources such as government pasture stations
- If buying seeds from neighbours, conduct a germination test first
- A mixture of compatible seed types can help expand biodiversity
3. Timing of Sowing
Timing affects germination success significantly:
- Sow at the beginning of the rainy season when rainfall is likely
- In Tanzania, this is typically October/November in the Eastern zone and August/September in Western and Central zones
- For small areas, provide supplementary irrigation if needed
Broadcasting Method
Broadcasting is the simplest method where seeds are scattered over the soil surface.
Procedure:
- Clear the site of unwanted vegetation using hand tools (spades, hoes) or tractor-mounted equipment
- Prepare the soil through light tillage to ensure good seed-to-soil contact
- Select high-quality seeds (from government pasture stations)
- Broadcast seeds evenly by hand
- Since hand broadcasting is not precise, add 10-20% extra seeds to compensate for uneven distribution
- Lightly cover the seeds by raking or harrowing
Equipment needed: Shovels, rakes, hand hoes, wheelbarrows, and if available, tractor plough and harrow
Seed Drilling Method
Drilling is an improved method where seeds are placed at uniform depth and spacing.
Advantages over broadcasting:
- Better seed-to-soil contact
- Reduced seed predation by birds and insects
- Less competition with weeds
- More economical use of seeds
- Improved germination rates
Procedure:
- Prepare a fine seedbed
- Use a seed drill to open furrows at the correct depth (6-12mm for most pasture seeds)
- Place seeds in the furrows at uniform spacing
- Close the furrows to cover the seeds
A farmer wants to reseed a bare patch of rangeland covering 0.5 hectares using the broadcasting method. The recommended seed rate for Rhodes grass (Chloris gayana) is 10 kg per hectare.
Calculation:
- Area to be reseeded = 0.5 hectares
- Seed rate = 10 kg/ha
- Basic seed requirement = 0.5 × 10 = 5 kg
- Add 15% adjustment for uneven broadcasting = 5 kg × 0.15 = 0.75 kg
- Total seeds needed = 5 + 0.75 = 5.75 kg
- Prepare the land properly to ensure good seed-to-soil contact
- Avoid sowing too deep — most pasture seeds require only 6-12mm depth
- Seeds planted too deep may not germinate; seeds planted too shallow may dry out
- After sowing, the area should be protected from heavy grazing until the new plants are established
- Monitor the site regularly for weed invasion and control if necessary
A pastoralist in Singida region notices that a section of their traditional grazing area has become bare due to overgrazing during the dry season. By applying reseeding techniques, they can restore this land by clearing it, selecting appropriate local grass seeds like Rhodes grass, and broadcasting during the next rainy season. After a few months, the restored area will provide fresh forage, reducing the need to purchase expensive supplementary feed and improving milk production from their dairy cows.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select work tools, equipment and safety gears
- Perform reseeding or over sowing
- Apply manure and fertilizers
- Keep different records
- Clean tools, equipment used and work place
- Determine range land productivity
- Store tools and equipment
Tathmini ya matokeo
Reseeding and over sowing performed as per the required standards.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to perform reseeding and over sowing
Principles: The student should outline the principles involved in performing reseeding and over sowing
Theories: The student should:
- Elaborate types of pasture
- Differentiate methods of reseeding and over sowing
- Highlight the importance of over sowing and reseeding
Circumstantial knowledge: Detailed knowledge about
- Weather and climatic changes
- Safety precautions in the uses of fires
Swali
What is the main difference between reseeding and over-sowing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado