Mada za sehemu hiiProcessing milkMada 7
Pasteurizing Milk
Milk pasteurization is the process of heating raw milk to a specific temperature for a set period without significantly changing its nutritional value or flavour. The main purposes are to kill harmful bacteria, preserve milk quality, and extend its shelf life. This process makes milk safe for human consumption by eliminating disease-causing microorganisms while keeping the milk wholesome.
There are three main methods used for pasteurizing milk:
1. Low-Temperature, Long-Time (LTLT) Pasteurization
This is also called batch pasteurization. Milk is heated to 60–65°C and held at that temperature for about 30 minutes.
Procedure for LTLT pasteurization:
- Prepare fresh, clean milk and sanitize all equipment that will touch the milk.
- Pour milk into a pasteurization tank and begin heating slowly.
- Use a thermometer to control temperature. Increase gradually to 60–65°C. Do not heat too quickly or the milk may scorch.
- Stir gently during the 30-minute holding period to ensure uniform heat distribution.
- Maintain temperature of 60–65°C throughout the holding time.
- Cool the milk after pasteurization. Use a cooling water bath or chilled water circulation to lower temperature to 4°C or lower within 1–2 hours.
- Store in clean, sanitized, airtight containers in a refrigerated environment (0–4°C).
- Label containers with pasteurization date and time. Use within 7–14 days.
2. High-Temperature, Short-Time (HTST) Pasteurization
This is the most common method used in milk processing plants. Milk is heated to 72°C for 15 seconds, then rapidly cooled.
Procedure for HTST pasteurization:
- Prepare milk free from impurities, sourced from healthy animals. Clean and sanitize all equipment.
- Ensure the HTST pasteurizer is in good working condition with calibrated valves, pumps, and temperature probes.
- Pump chilled milk into the HTST pasteurizer system.
- Pre-heat the milk using a heat exchanger system. Heat to 72°C before it enters the holding tube.
- Maintain the milk at 72°C for 15 seconds in the holding tube. Ensure proper flow rate.
- Cool the milk rapidly to below 4°C using a plate heat exchanger with cold water or chilled milk.
- Store in sanitized containers in a refrigerated environment. Shelf life: 16–21 days.
3. Ultra-High Temperature (UHT) Pasteurization
This method sterilizes milk by heating it to 135–150°C for 2–5 seconds. It kills all microorganisms and extends shelf life while preserving taste and nutrition.
Procedure for UHT pasteurization:
- Prepare clean, fresh milk from healthy animals. Sanitize all equipment.
- Pump milk into the UHT system. Pre-heat to 60–70°C, then heat rapidly to 135–150°C for 2–5 seconds using high-pressure steam.
- Monitor temperature probes to ensure target temperature is reached and maintained.
- Cool the milk rapidly to below 4°C using a heat exchanger.
- Pack milk in sterile aseptic containers (such as Tetra Pak) to prevent contamination.
- Store in a cool, dry place away from sunlight. Unopened UHT milk can last up to 6–9 months at room temperature. Once opened, refrigerate and use within 7 days.
| Method | Temperature | Time | Shelf Life (refrigerated) |
|---|---|---|---|
| LTLT (Batch) | 60–65°C | 30 minutes | 7–14 days |
| HTST | 72°C | 15 seconds | 16–21 days |
| UHT | 135–150°C | 2–5 seconds | 6–9 months (unopened, room temperature) |
When pasteurizing milk, the following equipment and protective gear are needed:
Equipment: Buckets, tables, milk cans, milk sieves/filters, lactometers, stirrers, pasteurizer, record books.
Protective Gear: White coats, aprons, gumboots, industrial caps, masks.
In Tanzania, small-scale dairy farmers and milk vendors can use simple pasteurization methods to extend milk shelf life and reduce losses. For example, a milk vendor in Mwanza who buys raw milk from local farmers can heat it to 65°C and hold for 30 minutes using a simple pot and thermometer, then cool it quickly. This pasteurized milk can be sold to customers the next day without spoiling, increasing profits by reducing waste and allowing sales beyond the same day.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select work tools, equipment, machines and safety gears
- Maintain hygiene of milk processing unit
- Pasteurizing milk
- Keep different records
- Clean tools, equipment, machine used and workplace
- Store tools and equipment
Tathmini ya matokeo
Milk Pasteurized according to the set standards of milk treatment.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to pasteurize milk
Principles: The student should state principles involved in Pasteurizing milk
Theories: The student should :
- Elaborate how to maintain milk hygiene
- Explain milk collection and transportation
- Describe ways of handling and storage of milk products
- Elucidate ways of marketing milk
- Highlight the importance of keeping different records
Swali
What is the temperature range used in Low-Temperature, Long-Time (LTLT) pasteurization of milk?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado