Mada za sehemu hiiPreparing carcassesMada 3
- Preparing poultry carcasses
- Preparing ruminant carcasses
- Preparing pig carcasses
Preparing Pig Carcasses
A pig carcass is the body of a pig after it has been slaughtered, bled, dressed, and split for processing. Carcass preparation includes the removal of hair (dehairing), internal organs, and other parts that are not used in meat production. Pig carcasses are often processed into various pork products such as bacon, ham, sausages, and other cuts of meat.
Dehairing of pig carcasses is the process of removing hair from a bled and scalded pig. There are two methods of dehairing: manual dehairing and machine dehairing.
Advantages and Disadvantages of Manual Dehairing
Advantages:
- Cost-effective and affordable for small-scale farms, since there are no requirements for expensive dehairing machines or maintenance costs
- Allows removal of hair from difficult areas like the head, feet, and tail, which can be missed when using a dehairing machine
- Does not require electricity, making it suitable for both urban and remote areas
Disadvantages:
- Labour-intensive and time-consuming, especially if many pigs are to be dehaired
- Lacks consistency in appearance, as some carcasses may remain with hairs if not done carefully
- Can result in cuts or abrasions to the pig's skin, affecting its appearance and quality
Tools, Equipment and Materials for Manual Dehairing
- Steriliser
- Large container
- Working table
- Scrapers (oval pig scraper, round pig scraper, and electric toe scraper)
- Knives
- Thermometer
- Panga/machetes
- Razor blade
- Brush
- Hooks
- Hot water
Procedure for Manual Dehairing
-
Put on protective gear and prepare the working area, tools, and equipment.
-
Boil water to a temperature between 60°C and 65°C.
-
Prepare the pig (stun and bleed the pig). Immerse the bled pig in the hot water for about 3 to 5 minutes. The water helps to loosen the hair follicles for easy removal. If immersing is difficult, cover the bled pig with a sack and pour water over it. Check if the pig is ready for scraping by gently pulling a few hairs. If they come out easily, the pig is ready for scraping. If not, dip it for another 3 minutes.
-
Withdraw the pig from scalding water and perform scraping of small sections at a time to ensure complete removal of hair. Use a scraping tool or a dull knife to scrape the pig from the head toward the back.
-
Burn off any leftover hair (stubble) by using a torch or singeing device. Scrape the remaining hairs with a razor blade if there is no singeing equipment.
-
Scrub and rinse the dehaired pig by using a brush and clean water to wash away any loose hair, dirt, or residues.
-
Perform evisceration or submit a dehaired pig for the evisceration process.
Proper evisceration ensures food safety by minimising the risk of carcass contamination from the animal's gastrointestinal contents. The gastrointestinal tract sometimes harbours harmful bacteria like E. coli, Salmonella, and Listeria. It also ensures the freshness, quality, and long shelf life of the meat and minimises partial or total condemnation of carcasses due to contamination with gut contents.
Tools, Equipment and Materials for Evisceration
- Steriliser
- Large container
- Worktable
- Knives
- Hooks
- Potable water
Procedure for Evisceration of a Pig Carcass
-
Put on appropriate protective gear and prepare the working area, tools, and equipment.
-
Position the carcass in a way which facilitates easy access to the abdominal cavity. Make an incision along the midline of the animal's abdomen from the sternum to the pelvis.
-
Open the abdominal cavity by exerting pressure on both sides while cutting with a specialised knife to create enough space for removing viscera.
-
Cut the connective tissue without damaging green offal to detach viscera from the carcass. Tie or clamp the oesophagus to prevent the release of contents into the cavity.
-
Separate red and green offal; then split the carcass.
-
Prepare carcass and organs for meat inspection.
-
Wash the carcass and edible slaughter by-products.
-
Preserve/chill or dispatch carcass and edible by-products.
A pig farmer in Morogoro has prepared 5 pigs for slaughter. After stunning and bleeding, the farmer performs manual dehairing by scalding each pig in water at 62°C for 4 minutes. Using a scraper, hair is removed starting from the head toward the back. After rinsing, the farmer performs evisceration by making a midline incision, opening the abdominal cavity, and carefully removing the viscera while clamping the oesophagus to prevent contamination. The carcass is then washed and prepared for meat inspection.
In Tanzania, small-scale pig farmers in regions like Mbeya, Iringa, and Mwanza can apply these skills to process their pigs for sale at local markets or to butcher shops. For example, a farmer who properly dehairs and eviscerates a pig can sell a clean, well-prepared carcass for around TZS 15,000 to TZS 20,000 per kilogram, compared to improperly prepared carcasses that sell for much less. This competency also enables students to work in slaughter facilities or start their own pork processing businesses, contributing to food security and income generation in their communities.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select work tools, equipment and safety gears
- Maintain hygiene of slaughter facility and equipment
- Care slaughter stock in a lairage
- Perform stunning
- Bleed slaughter stock
- Perform scalding
- Perform singeing
- Eviscerate carcasses
- Split carcasses
- Wash carcasses
- Prepare carcasses for meat inspection
- Handle meat inspection judgments
- Weigh carcasses
- Handle / chill carcasses
- Keep different records
- Clean tools, equipment, machine used and workplace
- Store tools and equipment
Tathmini ya matokeo
Pig carcasses prepared according to the required standards.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should be able to elaborate how to prepare pig carcasses Principle: The student should be able to outline principles involved in preparing pork carcasses
Theories: The student should :
- Explain how to maintain abattoir hygiene
- Highlight the importance of meat inspection
- Highlight the importance of lair aging slaughter stock
- Elaborate how to perform antemortem inspection
- Elaborate how to make antemortem inspection judgments
- Outline different stunning methods
- Explain the importance of proper stunning and bleeding
- Enumerate bleeding procedures
- Enumerate procedures of flaying/skinning
- Elaborate how to perform evisceration of carcass
- Explain how to perform post-mortem inspection
- Elucidate how to make meat inspection judgments
- Elaborate how to Handle and store meat
Circumstantial knowledge: Detailed knowledge
- Environmental issues due to improper handling of slaughter waste products.
Swali
What is the recommended water temperature for scalding pig carcasses during manual dehairing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado