Step 1: Prepare the Meat
Select fresh, high-quality meat such as beef, chicken, lamb, or pork. Trim off excess fat, as fat can cause the meat to spoil faster. Cut the meat into small strips or pieces depending on your preference and the type of meat.
Step 2: Prepare the Canning Jars
Wash the jars thoroughly with hot, soapy water. Heat the jars by placing them in hot water or a dishwasher. Boil the new lids in water for about 10 minutes before sealing them on the jars.
Step 3: Pack the Meat into Jars
Pack the meat into the jars tightly but without crushing it. Leave about 1 inch of headspace at the top of each jar. Add about one teaspoon of salt per litre jar to enhance flavour. Add spices such as garlic, onions, or other flavourings as desired.
Step 4: Add Liquid
For beef, add about ½ cup to 1 cup of liquid per jar. This helps create the steam needed for proper canning. For chicken or turkey, add some water to help create steam during the process.
Step 5: Wipe and Seal
Fill the jars, then wipe the rims with a clean, damp cloth to remove any food particles or residue. This ensures a proper seal. Place the lids on top and screw on the metal rings firmly but not too tightly.
Step 6: Arrange Jars in the Canner
Place the jars on the canner's rack, leaving at least 2.5 cm between them to allow proper heat circulation. Add water to the pressure canner as per the manufacturer's instructions, usually about 5-7 cm of water at the bottom.
Step 7: Process the Meat
Close the pressure canner properly. Turn on the stove and heat the canner. Allow the canner to steam for 10 minutes before placing the weight or locking the lid. Bring the pressure to 10-15 psi (pounds per square inch), depending on your altitude.
Processing times:
- Pork or beef: 75 minutes (for 0.5 litre) or 90 minutes (for 1 litre)
- Poultry (chicken, turkey): 75 minutes (for 0.5 litre) or 90 minutes (for 1 litre)
- Game meat: 75 minutes (for 0.5 litre) or 90 minutes (for 1 litre)
Step 8: Cool and Check Seals
Turn off the heat when processing is complete and allow the pressure canner to cool naturally. Do not attempt to open the canner until the pressure has dropped to zero. Carefully remove the jars using a jar lifter and place them on a clean towel to cool for several hours or overnight.
After cooling, check the lids. The centre of the lid should be concave (curved downward). If the lid pops up when pressed, the jar has not sealed properly and must be reprocessed or refrigerated.
Step 9: Store
Label each jar with the contents and the date. Store the sealed jars in a cool, dark, and dry place.