Mada za sehemu hiiControlling quality of hides and skinsMada 2
- Inspecting hides and skins
- Grading hides and skins
Inspecting Hides and Skins
Hides and skins are important animal by-products used to make leather and other materials. Before processing, they must be inspected to ensure they meet quality standards. This inspection involves examining the hide or skin carefully to identify any defects or problems that would reduce its value or make it unsuitable for leather production.
Inspecting hides and skins is an essential step in quality control because:
- It determines the grade and value of the hide or skin
- It identifies defects that affect leather quality
- It ensures only suitable materials proceed to tanning
- It helps detect diseases or parasites that affected the animal
Visual inspection is the first step in examining hides and skins. It involves looking carefully at the surface to assess quality using your sense of sight.
What to Look For During Visual Inspection
Surface condition: Check the surface for any visible defects such as cuts, tears, punctures, scratches, or abrasions. These could have occurred during slaughter, skinning, or handling. Smooth surfaces without damage indicate higher quality.
Discoloration: Look for uniform colour throughout the hide. Stains or uneven colour may indicate improper curing, contamination, or disease. Good quality hides have a consistent, natural colour.
Contamination: Examine the hide for signs of dirt, faeces, blood, or insects that may have contaminated it during slaughter or processing. Contaminated hides are harder to process and may produce lower-quality leather.
Uniformity: Check for consistency in texture and colour across the entire hide. Irregularities can indicate damage, disease, or improper curing methods.
Signs of parasites: Look for scabs, sores, infections, or tick marks. These indicate the animal had parasites or health problems, which affect hide quality.
Characteristics of a Good Quality Hide
A good quality hide should have:
- Uniform colour without stains or discoloration
- Smooth texture free from cuts, tears, or scratches
- No visible defects or blemishes
- Clean appearance without contamination
- Proper moisture — not too dry and not too wet
The organoleptic test uses your senses — smell, touch, and sight — to evaluate hide quality. This method helps identify defects that may not be visible but affect the final product.
Preparing for the Test
Before conducting the organoleptic test:
- Ensure the working area is clean and free from strong odours
- Have good lighting to see details clearly
- Wear clean gloves
- Use a clean, flat surface to lay the hide or skin
Step-by-Step Organoleptic Inspection
Step 1: Odour Inspection Smell the hide or skin to evaluate its odour. A fresh hide should have a mild, natural animal smell. A neutral or slightly natural odur indicates freshness. A foul or rancid odour suggests spoilage, likely from improper curing or storage. A strong chemical smell could indicate excessive use of tanning agents or other chemicals.
Step 2: Texture Assessment (Touch Test) Gently rub your hands over the hide or skin to assess its texture. Good quality hide should feel smooth, firm, and even to the touch. It should not be excessively soft or overly hard. If the texture feels sticky, slimy, or excessively dry and rough, the hide may be of poor quality or improperly processed.
Step 3: Flexibility Test A good quality hide will have some flexibility. Test this by gently bending a corner of the hide. It should bend without cracking but should not be so limp that it falls apart easily. Too much stiffness may indicate the hide is too dry, while excessive softness may indicate decay.
Interpreting Results
After the organoleptic test:
- Good quality hide: If the hide passes all sensory evaluations with good appearance, mild odour, smooth texture, and no visible defects, it is considered high quality.
- Defective hide: Any significant issues such as strong unpleasant odour, visible damage, or abnormal texture may lead to the hide being classified as lower quality or unsuitable for leather production.
During practical work, you will inspect hides and skins using a guide sheet. Follow these steps:
- Size and shape: Measure the hide and check if it has the correct, full shape without missing parts.
- Visualisation: Examine the hide under good lighting for colour, defects, and contamination.
- Type identification: Identify whether it is a cattle hide, goat skin, or sheep skin.
- Odour check: Smell the hide to detect any foul or abnormal odours.
- Hole and tear check: Look carefully for any holes, cuts, tears, or scratches on both the flesh side and hair side.
- Record findings: Write down all observations in your record book.
Example of Recording Inspection Results
| Parameter | Observation | Quality Assessment |
|---|---|---|
| Size | Large, full shape | Good |
| Colour | Uniform brown | Good |
| Surface | Smooth, no cuts | Good |
| Odour | Mild, natural | Good |
| Holes | One small hole on edge | Fair |
| Parasite marks | No tick marks observed | Good |
Overall Grade: Grade 2 (Good quality) — suitable for furniture leather or standard footwear.
After inspection, hides and skins are graded based on their quality:
Grade 1 (Premium Quality)
- Smooth surface free from cuts, scars, or visible defects
- Uniform colour typical of the species
- Full shape with no missing parts
- No visible injuries or scars
- Clean flesh side
- Consistent thickness throughout
Grade 2 (Good Quality)
- Mostly smooth with minor surface defects like light scratches
- Minor discolourations or slight patches of uneven colour
- Fairly full shape with slight irregularities
- Small scars or branding marks that are not deep
- Minor imperfections on flesh side that can be treated during tanning
- Suitable for furniture leather, belts, and standard footwear
Grade 3 (Low Quality)
- Major defects such as deep cuts, large scars, or visible damage
- Noticeable discolouration
- Imperfectly shaped with missing sections
- Extensive scarring, wounds, or bite marks
- Heavy contamination on flesh side
- Used for lower-end leather products
Grade 4 (Very Low Quality)
- Extensive damage including deep tears or widespread surface flaws
- Severe discolouration
- Irregular shape with missing sections
- Severe injuries or chronic scarring
- Heavy contamination with faeces or bacteria
- Usually rejected from leather production
In Tanzania, hides and skins are important trade items in local markets and leather industries. A farmer or trader in Mbeya or Arusha can use these inspection skills to check the quality of cattle hides before selling them to leather tanneries. By properly inspecting hides for defects, cuts, and parasites, a farmer can negotiate a fair price — a Grade 1 hide may sell for around TSh 80,000–120,000 while lower grades fetch much less. This skill also helps butchers identify quality issues in animals during slaughter, ensuring only good hides reach the market and commanding better prices.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select work tools and safety gears
- Identify skins and hides defects
- Inspect hides and skins
- Keep different records
- Clean tools, equipment used and work place
- Store tools and equipment
Tathmini ya matokeo
Hides and skins quality maintained according to the set standards.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: the student should be able to elaborate how hides and skins quality are maintained according to the set standards.
Principles: The student should state the principles involved in inspecting hides and skins
Theories: The student should explain the:
- Economic importance of inspection
- Common defects of hides and skins
Swali
During visual inspection of hides and skins, a farmer should check for all of the following EXCEPT:
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado