Mada za sehemu hiiControlling insect pestsMada 5
Chemical Insect Pest Control
Chemical insect pest control is the use of insecticides to kill or weaken harmful insects that damage horticultural crops. Insecticides are special chemicals sprayed or applied to crops or targeted areas to stop insects from feeding, growing, or reproducing. This method works quickly, especially when there are many insect pests or when damage is severe, helping to reduce crop loss, improve yield, and protect plant health.
Insecticides are grouped in three main ways.
Based on Mode of Action
- Contact insecticides kill insects when the spray touches the insect's body. These are applied to leaves, stems, or other plant parts, and insects die when the insecticide reaches them directly during spraying or when they crawl on treated surfaces.
- Systemic insecticides enter the plant and move through its tissues, killing insects when they feed on the plant. These are useful for controlling hidden or sap-sucking pests such as aphids and whiteflies.
Based on Time of Application
- Preventive insecticides (also called prophylactic) are used before insect pests appear. They protect crops by stopping early pest attacks.
- Curative insecticides are applied after pests have already started damaging the crops. These help reduce the number of pests and prevent further damage.
Based on Type of Insect Affected
- Selective insecticides target only specific types of insect pests. For example, they may control caterpillars but leave other insects unharmed, helping to protect useful insects like bees and ladybird beetles.
- Non-selective insecticides kill many types of insects, both harmful and beneficial. These must be used with great care to avoid damaging the environment or helpful organisms.
Several factors influence the success of chemical insect pest control:
-
Choice and proper preparation of the insecticide: The insecticide must be suitable for the type of insect pest and the crop. It must be measured and mixed with clean water at the right concentration. Using too little may allow pests to survive, while using too much can damage the crop or leave harmful residues.
-
Time and method of application: Insecticides are most effective when applied early, before pests have caused serious damage. Spraying should reach all affected plant parts, especially the undersides of leaves where pests often hide.
-
Weather conditions: Spraying during strong wind can cause the insecticide to drift to unwanted areas. Rain can wash away the chemical before it acts. Spray when the weather is calm, dry and cool, usually in the early morning or late afternoon.
-
Level of pest infestation: If pest numbers are low, a selective or mild insecticide may be sufficient. If the infestation is severe, a stronger or fast-acting insecticide may be needed.
-
Risk of pest resistance: When the same insecticide is used many times, pests can become resistant. Rotate insecticides with different active ingredients to reduce this risk.
The following are commonly used:
- Spraying equipment: Knapsack sprayers (small to medium gardens), hand sprayers (individual plants), boom sprayers (large fields)
- Measuring equipment: Measuring cups for accurate measurement
- Clean water: For mixing insecticides and cleaning equipment
- Recording materials: Permanent markers and record books
- Insecticides: In original containers with clear labels
- Protective clothing: Gloves, masks, safety glasses or goggles, overalls, gumboots
Follow these steps carefully:
-
Observe the crop: Visit the garden or field to identify the insect pests present. Note the plant parts affected, the number of pests, and the damage caused.
-
Select the correct insecticide: Choose based on pest type, crop type, and level of infestation. Read the label carefully and confirm the product is recommended for the problem.
-
Wear protective gear: Put on gloves, gumboots, mask, goggles, and overalls before handling the insecticide.
-
Mix the insecticide: Use a clean measuring cup to measure the correct amount. Mix with clean water in the sprayer tank according to label instructions. Stir gently to ensure thorough mixing.
-
Check the sprayer: Inspect for leaks and ensure the nozzle is working correctly. Calibrate if needed for even spraying.
-
Spray the crop: Apply evenly, covering both upper and lower leaf surfaces. Spray in calm weather, either early morning or late afternoon. Avoid windy or rainy conditions.
-
Clean equipment: After spraying, wash the sprayer and tools using clean water and soap, far away from wells or streams.
-
Clean protective clothing: Remove and wash all protective gear with soap and water. Hang to dry before storing.
-
Store remaining insecticide: Return to original container, seal tightly, and store in a locked, dry, well-ventilated place out of reach of children and animals.
-
Keep records: Write down the name of insecticide, date of spraying, crop treated, pest targeted, and any changes observed in pest numbers.
- Check the expiry date on the label before use
- Read and follow the manufacturer's instructions
- Wear personal protective gear at all times
- Avoid inhalation and exposure to chemical fumes; work in well-ventilated areas
- Do not eat, drink or smoke while handling chemicals
- Wash hands thoroughly after work
- Do not spray on windy days
- Never blow or suck blocked nozzles; use clean tools to unclog them
- Clean equipment away from water sources
- Follow the withdrawal period before harvesting treated crops
- Dispose of leftover chemicals and empty containers properly
- Keep accurate records of chemical use
A farmer in Morogoro finds aphids on tomato plants in a 50-square-meter garden. The farmer selects a systemic insecticide because aphids are sap-sucking pests. Following the label, the farmer mixes 15 ml of insecticide with 10 liters of clean water. Wearing gloves, mask, goggles, and gumboots, the farmer sprays in the early morning when there is no wind. After spraying, the farmer cleans the knapsack sprayer with clean water and records: "Date: 15/6/2024, Crop: Tomato, Pest: Aphids, Insecticide: [Name], Amount: 15ml in 10L water." After 7 days, the farmer observes reduced aphid numbers and harvests safely after following the label's waiting period.
A small-scale vegetable farmer in Arusha can apply chemical insect pest control to protect tomatoes, cabbages, or peppers from caterpillars, aphids, or whiteflies. By selecting the correct insecticide, wearing protective gear, and following proper mixing and spraying procedures, the farmer can reduce crop loss and earn more income from selling healthy produce at the local market.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools and equipment and machineries
- Classify crop pests
- Calibrate amount of insecticide
- Apply insecticide to the infested horticultural crops
- Carry out chemical insect control
- Observe safety precautions
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Chemical insect control performed as per recommended standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to control crop insect pests by using chemical method
Principles: The student should explain the principles observing rules and regulations regarding controlling of horticultural insect pest
Theories: The student should explain:
- Control measure by using chemical control
- Importance of chemical insect controlling method Circumstantial knowledge Detailed knowledge about Different methods of insect pest’s control
Swali
Which group of insecticides enters the plant and moves through its tissues to kill insects that feed on the plant?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado