Mada za sehemu hiiHandling fire accidentsMada 3
- Identifying different classes of fire
- Handling firefighting equipment
- Handling different classes of fire
Understanding the different classes of fire is essential because each type of fire requires a specific method of extinguishing. Using the wrong method can make the fire worse or cause injury. Fires are classified based on what material is burning.
Class A: Ordinary Combustibles
Class A fires involve everyday materials that leave ash when they burn. These include wood, paper, cloth, plastics, and some types of trash.
- Fuel: Wood, paper, cloth, plastics, trash
- How to extinguish: Use water, foam, or dry chemical extinguishers. Water cools the burning material and removes heat.
Class B: Flammable Liquids and Gases
Class B fires involve liquids and gases that can catch fire easily.
- Fuel: gasoline, oil, grease, solvents, propane, natural gas
- How to extinguish: Use carbon dioxide (CO2), dry chemical, or foam extinguishers. These cut off oxygen to smother the fire. Do not use water because water can spread the fire.
Class C: Electrical Fires
Class C fires involve electrical equipment that is powered or energized.
- Fuel: Appliances, wiring, circuit breakers, outlets
- How to extinguish: Use dry chemical or CO2 extinguishers. These agents do not conduct electricity. Important: Try to turn off the power source before attempting to extinguish the fire to avoid electric shock.
Class D: Combustible Metals
Class D fires involve metals that burn at high temperatures.
- Fuel: Magnesium, titanium, potassium, sodium, lithium
- How to extinguish: Use special dry powder extinguishering agents designed specifically for metal fires. Never use water on these fires because water can cause explosions or spread the fire.
Class K: Cooking Oils and Greases
Class K fires involve cooking oils, fats, and greases used in kitchens.
- Fuel: Cooking oils, fats, greases
- How to extinguish: Use wet chemical extinguishers. These create a soapy layer that cools the fire and prevents it from reigniting.
Follow these four steps when using a fire extinguisher:
- Pull the pin to break the seal
- Aim at the base of the fire, not the flames
- Squeeze the handle to release the extinguishing agent
- Sweep from side to side until the fire is completely out
A fire starts in the farm workshop involving a broken electrical generator. The generator is still plugged in and producing sparks.
Analysis: This is a Class C fire because it involves energized electrical equipment.
Action:
- First, try to disconnect the power source if it is safe to do so
- Use a dry chemical or CO2 extinguisher labeled for Class C fires
- Do NOT use water or foam extinguishers
- Stand at a safe distance and apply the PASS technique
- Always identify the class of fire before choosing an extinguisher
- Water is safe for Class A fires but dangerous for Class B, C, D, and K fires
- Keep fire extinguishers accessible and regularly checked
- If you cannot safely extinguish the fire, evacuate immediately and call the fire service
In Tanzania, smallholder farmers often store fuel for irrigation pumps and tractors in their farm workshops. If a fuel spill catches fire, the farmer must recognize it as a Class B fire and use sand, dry powder, or foam to smother the flames—never water, which would spread the burning fuel. Knowing fire classes helps farmers protect their equipment, stored crops, and family members from dangerous fires.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and safety gears
- Identify common classes of fire
- Respond correctly and safely when faced with different types of fire
- Identify different types of fire extinguisher
- Apply right class of fire extinguisher
- Handle different types of fire
- Apply right class of firefighting materials
- Check and test fire extinguishers
- Observe safety precautions
- Store tools, equipment and safety
Tathmini ya matokeo
Different classes of fire handled as per stipulated rules and regulations
Tathmini ya maarifa
Knowledge Evidence
Detailed knowledge of:
Method used: The student should be able to explain how to handle different classes of fire accidents
Principles: The student should explain
- the principles of: Handling different classes of fire
- Checking and testing fire extinguishers
- Applying right class of fire extinguishers
Theories: The student should explain: -
- Importance of handling fire accidents,
- Importance of checking and servicing fire extinguishers,
- Importance of differentiating firefighting materials
Circumstantial knowledge:
Detailed knowledge about: Safety precautions while handling fire accidents Safe handling of tools and equipment
Swali
Which class of fire involves ordinary combustibles such as wood, paper, and cloth?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado