Mada za sehemu hiiControlling vertebrate pestsMada 6
Chemical control of vertebrate pests involves using poisons or toxic baits to kill or repel animals such as rats, mice, birds, and squirrels that damage crops and stored produce. This method is often used when other control methods like trapping or biological control are not effective enough.
Vertebrate pests are animals with backbones that cause damage to crops and stored grains. Common vertebrate pests in Tanzania include:
- Rats and mice – eat stored maize, beans, and rice; also gnaw on young seedlings
- Birds – such as quelea birds that attack wheat, sorghum, and rice fields
- Squirrels – damage maize and groundnuts
- Porcupines – dig up and eat root crops like cassava and sweet potatoes
Chemical control uses specially formulated poisons or toxic baits to reduce or eliminate these pest populations.
Different chemicals are available for controlling vertebrate pests. The choice depends on the type of pest, the crop, and whether the chemical is for field or storage use.
Commonly used rodenticides (for rats and mice):
- Zinc phosphide – acts as a fast-acting poison; mixed with cereal baits
- Brodifacoum – a slow-acting anticoagulant; effective but requires multiple feedings
- Warfarin – an anticoagulant that causes internal bleeding
For bird control:
- Fenthion – used as a spray or bait for quelea birds
- Avicides – chemicals specifically designed to control bird pests
Important: Always read the chemical label before use and follow the manufacturer's instructions carefully.
Before applying chemical control, gather the following:
- Protective gear: overalls, gum boots, caps, masks, and gloves
- Chemicals/poisons as recommended for the target pest
- Cereal bran or maize meal to use as bait carriers
- Containers for mixing and holding baits
- Weighing balance or scale for measuring quantities
- Measuring cylinders for measuring liquid chemicals
- Water for mixing
- Application equipment: sprayers or bait stations
Step 1: Identify the Pest and Assess the Problem
Observe the field or storage facility to identify which vertebrate pests are present and the extent of the damage. This helps in selecting the appropriate chemical.
Step 2: Calculate the Amount of Chemical Needed
The amount of chemical depends on the area to be treated and the pest population. For example, when using zinc phosphide:
- Standard mixing ratio: 20 grams of zinc phosphide per 1 kg of cereal bait
- Application rate: 10–15 kg of prepared bait per hectare for field crops
Worked example: If you have a 0.5-hectare maize field infested with rats, you need:
0.5 ha×12.5 kg/ha=6.25 kg of bait
For the chemical: 6.25 kg bait×20 g zinc phosphide per kg=125 g zinc phosphide
Step 3: Prepare the Bait
- Wear protective clothing (overalls, gum boots, masks, caps)
- Mix the calculated amount of chemical thoroughly with the cereal bran or maize meal
- Add a small amount of water to help the bait hold together
- Mix until the chemical is evenly distributed
Step 4: Apply the Bait
- Place baits in areas where pests are active, such as along runways, near burrows, or around storage structures
- For field crops, scatter baits along the field edges and in areas with visible pest activity
- For stored produce, place baits in corners and along walls where rodents travel
- Do not place baits directly on top of food crops or in areas where non-target animals may access them
Step 5: Monitor and Reapply
Check the bait stations after 3–5 days. Replenish consumed baits as needed. Continue monitoring until the pest population is reduced.
- Always wear protective gear – overalls, gum boots, masks, and gloves when handling chemicals
- Store chemicals safely – keep in a locked place away from children, livestock, and food
- Do not eat, drink, or smoke while handling poisons
- Wash hands thoroughly with soap and water after handling chemicals
- Dispose of empty containers properly – do not reuse them for food or water
- Label baits clearly – mark them as POISON to prevent accidental consumption
A smallholder farmer in Morogoro who stores maize in a traditional granary can use chemical control to protect their harvest from rats. By mixing zinc phosphide with maize bran and placing the bait in secure stations around the granary, they can significantly reduce rat damage and preserve more of their grain for sale or family consumption throughout the year.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- The student should be able to:
- Select tools, materials, equipment and machines
- Identify types of vertebrate pests relevant to chemical control
- Apply chemical control to vertebrate pests
- Observe safety precaution
- Clean tools and equipment
- Store tools and equipment in a designated storage area.
Tathmini ya matokeo
Chemical control of vertebrate pests performed as per crop husbandry practices
Tathmini ya maarifa
Knowledge Evidence
Detailed knowledge of:
Method used: The student should be able to explain how to control vertebrate pests by chemical method
Principles: The student should explain the principles of chemical vertebrate pest control
Theories: The student should explain:
- Chemical vertebrates control method
- Signs of vertebrate damage to field crops
- Types of vertebrate pests
- Control of birds
- Control of rodents
- Control of wild pigs
- Control of monkeys
- Effects of vertebrate on crops
- Importance of vertebrate pests control
Circumstantial knowledge: Detailed knowledge about vertebrate pests control in field crops
Swali
Which of the following is NOT listed as a common vertebrate pest in Tanzania?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado