Mada za sehemu hiiFelling trees, de-limbing felled trees and cross-cutting tree trunksMada 5
Felling trees is the first step in obtaining timber for woodworking. It involves cutting down a tree and preparing it for transport to the sawmill.
Felling is the process of cutting down a tree using appropriate tools such as chainsaws, axes, or hand saws. After felling, the tree is cut to the required length for transport. This is the initial stage of timber logging.
Before learning to fell a tree, you must understand its three main parts:
- Roots – Anchor the tree in the ground and absorb water and nutrients from the soil
- Trunk – The main wooden stem that provides support and is the source of timber
- Crown – The top part of the tree consisting of branches and leaves
Different tools are used for felling trees depending on the size and type of tree:
| Tool | Purpose |
|---|---|
| Chainsaw | Cutting down large trees quickly |
| Hand saw | Cutting smaller trees or trimming branches |
| Axe | Chopping and shaping the cut |
| Felling wedges | Preventing the saw from pinching during cutting |
| Felling lever | Helping to tip the tree in the correct direction |
Always wear protective equipment when felling trees:
- Chainsaw helmet
- Safety boots
- Leather gloves
- Chainsaw trousers
- Reflectors or high-visibility vest
- Overall
Step 1: Assess the Tree and Surroundings
Examine the tree for damage, disease, or decay. Check the direction of lean and identify where the tree will fall safely. Clear the area of obstacles such as rocks, other trees, or debris.
Step 2: Plan the Escape Route
Identify a safe path to move away from the tree once it begins to fall. The escape route should be at a 45-degree angle away from the expected direction of fall.
Step 3: Make the Notch Cut
Cut a notch on the side of the tree facing the direction you want it to fall. The notch should be about one-third of the tree's diameter and shaped like a horizontal wedge.
Step 4: Make the Felling Cut
Cut from the opposite side of the tree, slightly above the bottom of the notch. Leave a small hinge of wood to control the tree's fall. Insert felling wedges if needed to keep the cut open.
Step 5: Fell the Tree
As the felling cut approaches the hinge, the tree will begin to fall. Move quickly along your escape route to a safe distance.
Step 6: De-limb and Cross-cut
After the tree has fallen, remove the branches (de-limb) and cut the trunk into appropriate lengths (cross-cutting) for transport.
- Always check your tools before use
- Ensure no one else is within the danger zone
- Use warning signs to alert others
- Keep a first aid kit nearby
- Never work alone when felling trees
A carpenter in Mwanza needs to fell a tree with a trunk diameter of 60 cm to obtain timber for making furniture. The tree leans slightly toward an open area.
Procedure followed:
- The carpenter assessed the tree and confirmed it leans toward an open area, making it safe to fell in that direction.
- A notch cut of 20 cm (one-third of 60 cm) was made on the side facing the open area.
- The felling cut was made from the opposite side, leaving a hinge of about 10 cm.
- The tree fell safely into the open area.
- Branches were removed and the trunk was cut into 2-meter lengths for transport to the sawmill.
This process ensures the tree is felled safely and the timber is prepared for further processing.
In Tanzania, small-scale timber traders in regions like Tanga and Morogoro use felling skills to harvest trees from community forests. A farmer may fell a single tree from their farm to sell logs to a local sawmill for income, or a carpentry workshop owner may purchase standing trees, fell them, and process the timber into furniture for sale at the market. Understanding proper felling techniques ensures safety and maximizes the value of the timber obtained.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Select tools and equipment for felling trees
- Locate harvesting area
- Identifying felling direction
- Locate harvesting area
- Fell trees
- Observe safety
- Clean tools
- Store tools
Tathmini ya matokeo
Tree is well felled as per stipulated standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The students should explain how to:
- Select proper tools for felling trees
- Fell tree properly
- Apply safety precautions while felling trees
Principles: The student should explain procedures involved in felling trees
Theories: The student should explain the importance of:
- Directional tree felling
- Types of tools used in felling trees
Detailed knowledge about: Safety precautions while felling trees
Swali
What are the three main parts of a tree?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado