Mada za sehemu hiiMaintaining workshop safetyMada 2
- Performing firefighting
- Performing safe keeping of gas cylinder
Firefighting is the process of controlling and extinguishing fires to prevent injury, loss of life, and property damage. In a workshop setting, every worker must know how to use firefighting equipment correctly and understand the different classes of fire so they can respond quickly and safely in case of emergency.
The most common method of firefighting in workshops is using a fire extinguisher. The correct way to use a fire extinguisher follows the PASS method:
- Pull out the pin at the top of the extinguisher
- Aim the nozzle at the base of the fire
- Squeeze the handle to release the extinguishing agent
- Sweep the nozzle from side to side while aiming at the base of the flames
Additional firefighting techniques include using fire hydrants with pressure water, sand, and fire blankets. When fighting a fire, always attack in the direction of the wind, stand upwind to avoid smoke, and maintain a safe distance from the flames.
Regular maintenance ensures firefighting equipment works when needed. Key maintenance practices include:
- Regular inspection: Check all extinguishers, hoses, and nozzles routinely
- Check pressure levels: Verify that extinguisher pressure is within the recommended range
- Inspect for damage: Look for dents, leaks, corrosion, or cracks
- Ensure accessibility: Keep equipment unobstructed and easy to reach
- Verify nozzle functionality: Ensure nozzles are not clogged
- Clean hose reels: Remove dirt and check for cracks
- Refill or replace: Service extinguishers that have been used or have reached their expiration date
Fires are classified into five main classes based on the type of fuel burning. Using the wrong extinguishing agent can make the fire worse.
Class A – Ordinary Combustibles
- Fuel: Wood, paper, cloth, plastic, rubber
- Extinguishing agent: Water or water-based extinguishers
- How to handle: Aim at the base of the flames and sweep from side to side
Class B – Flammable Liquids and Gases
- Fuel: gasoline, oil, grease, propane
- Extinguishing agent: Foam, dry chemical, or carbon dioxide
- How to handle: Use foam to smother the fire or dry chemical to cut off oxygen supply
Class C – Electrical Equipment
- Fuel: Energized electrical equipment
- Extinguishing agent: Dry chemical or carbon dioxide (non-conductive)
- How to handle: Use non-conductive agents, or turn off the power source if it can be done safely
Class D – Combustible Metals
- Fuel: Magnesium, titanium, sodium, and similar metals
- Extinguishing agent: Specialized dry powder extinguishers designed for specific metals
- How to handle: Use class D dry powder extinguisher. Never use water – it reacts dangerously with some metals
Class K – Kitchen Fires
- Fuel: Cooking oils, fats, greases
- Extinguishing agent: Wet chemical extinguishers
- How to handle: Use wet chemical to create cooling and foaming action. Never use water – it causes oil to splash and spread the fire
When a fire occurs, follow these steps in order:
- Raise the alarm to alert others
- Evacuate safely using designated escape routes
- Call emergency services (dial 112 or 110)
- Use the correct extinguisher for the class of fire
- Stand upwind to avoid smoke inhalation
- Maintain safe distance from the fire
In Tanzania, fire safety is critical in workshops, markets, and homes. For example, if a small fire starts in a garage in Dar es Salaam due to spilt petrol, knowing how to use a Class B fire extinguisher (foam or dry chemical) can prevent the fire from spreading to nearby vehicles or buildings. Regular inspection of fire extinguishers in small businesses like workshops in Arusha or Mwanza ensures the equipment works when needed, protecting both lives and property worth millions of Tanzanian shillings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Operate firefighting equipment
- Identify types of fire
- Identify the firefighting equipment
Tathmini ya matokeo
Cleaned workshops conform to rules and regulations
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain different ways of Performing firefighting
Principles: The student should explain the principles related to: Performing firefighting
Theories: The student should explain:
- Different classes of fire
- The use of fire alarm
- Different firefighting appliances
- Workshop rules and regulations
- Personal protective equipment
Detailed knowledge about: Safety precautions to be observed when working
Swali
What does the letter P stand for in the PASS method of using a fire extinguisher?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado