Mada za sehemu hiiPerforming preventive maintenance of electrical toolsMada 3
- Maintaining workshop safety gears
- Maintaining electrical hand tools
- Maintaining measuring tools
Maintaining Electrical Hand Tools
Electrical hand tools are portable tools powered by electricity that make work easier in refrigeration and air conditioning. Regular maintenance keeps these tools working properly, extends their life, and prevents accidents in the workshop.
Electrical hand tools are portable tools that use electric power to perform various tasks. They have a motor inside that drives the working part of the tool. These tools make work faster and require less physical effort compared to manual tools.
In our trade, we commonly use:
- Electric drill – makes holes in metal, plastic, and wood
- Angle grinder – cuts and grinds metal pipes and sheets
- Electric screwdriver – fastens and removes screws
- Heat gun – softens insulation and bends plastic pipes
- Vacuum pump – removes air and moisture from refrigeration systems
Maintaining electrical hand tools is important because it:
- Keeps the tool working efficiently
- Extends the life of the tool
- Prevents accidents from faulty equipment
- Saves money by reducing need for replacement
- Ensures accurate work results
A maintenance schedule helps track when each tool needs attention. The chart usually shows:
- Tool name
- Maintenance activity needed
- Date performed
- Person responsible
- Next due date
Step 1: Preparation
Before maintaining any electrical hand tool:
- Wear safety gloves and safety clear glasses
- Put on an overcoat to protect your clothes
- Make sure the tool is unplugged from power
- Check that the work area is clean
Step 2: Cleaning
Use a blower to remove dust and debris from the tool's housing and ventilation slots. This prevents the motor from overheating. Wipe the exterior with a clean cloth. If needed, use a small amount of spirit (cleaning spirit) on the cloth to remove grease or stubborn dirt. Never let liquid enter the motor housing.
Step 3: Inspection
Check the following during inspection:
- Power cord – look for cuts, cracks, or exposed wires
- Plug – ensure it is not damaged
- Housing – check for cracks or breaks
- Switch – test that it turns on and off properly
- Bits or accessories – check for wear or damage
If any damage is found, report it to your supervisor. Do not use a damaged tool.
Step 4: Lubrication
Some tools need lubrication to keep moving parts working smoothly. Apply a few drops of light oil to:
- Chuck (the part that holds the bit)
- Bearing points
- Any visible moving parts
Step 5: Storage
After maintenance:
- Place tools in their designated storage area
- Keep them away from moisture
- Use the waste bin to dispose of any waste materials
- Record the maintenance activity in the schedule chart
- Always unplug tools before any maintenance
- Never use water to clean electrical tools
- Use safety glasses to protect eyes from debris
- Work in a well-ventilated area
- Keep fingers away from moving parts
- Report any faulty tools immediately
Example: You need to maintain an electric drill in your workshop.
Solution:
- Put on gloves, safety glasses, and overcoat
- Unplug the drill from the power socket
- Use the blower to blow out dust from the ventilation slots
- Wipe the housing with a clean cloth dampened with spirit
- Inspect the power cord for cuts or damage
- Check that the chuck tighten and loosens properly
- Apply a few drops of oil to the chuck
- Store the drill in its proper place
- Record the maintenance on the schedule chart
Maintaining electrical hand tools involves regular cleaning, inspection, lubrication, and proper storage. Following a maintenance schedule ensures that tools are always in good working condition, which makes your work safer and more efficient.
In Tanzania, a refrigeration technician working in Dar es Salaam or Arusha uses electrical hand tools like drills and grinders daily when installing or repairing air conditioners. Regular maintenance of these tools ensures they last longer and work reliably, which helps the technician complete jobs efficiently and avoid costly tool replacements. For example, a well-maintained drill can be used for many years, saving a small business owner the expense of buying new tools frequently.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Select tools
- Interpret maintenance schedule chart
- Identify faults
- Observe safety precautions
- Clean tools, equipment, machine and workplace
- Store tools and equipment
Tathmini ya matokeo
Maintained equipment/machine functions as per manufacturer’s specifications
Tathmini ya maarifa
Knowledge evidence: Detailed Knowledge of:
Method used: The student should explain different ways of maintaining electrical hand tools
Principles: The student should explain principles related to maintaining electrical tools
Theories: The student should explain:
- Electrical hand tools
- Importance of maintenance schedule
- Preparation of warning tags
Detailed knowledge about:
- Safety precautions to be observed while maintaining electrical hand tool
Swali
What is the FIRST step you must take before starting any maintenance on an electrical hand tool?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado