Mada za sehemu hiiPerforming drillingMada 2
- Carrying out drilling
- Carrying out reaming
Reaming is a finishing operation performed on a drilled hole to enlarge it slightly and produce a smoother, more accurate hole. After drilling, a hole may be slightly oversize or have rough surfaces. Reaming removes a small amount of material — typically 0.2 mm to 0.5 mm — to bring the hole to a precise size and finish.
- Improved accuracy: Produces holes with precise dimensions
- Smoother surface: Creates a better surface finish than drilling alone
- Correct alignment: Ensures holes are properly sized for bolts, pins, or shafts
- Extended tool life: Reduces wear on mating parts
Hand Reamers
- Operated manually using a T-handle
- Used for small jobs or when precision is critical
- Turned slowly by hand for controlled cutting
Machine Reamers
- Used in drilling machines or lathes
- Operate at higher speeds for faster material removal
- Fixed into the machine chuck like a drill bit
Other Types
- Solid reamers: Made from a single piece of tool steel
- Expansion reamers: Can be adjusted slightly for different hole sizes
- Chucking reamers: Designed for machine use with multiple cutting edges
Step 1: Prepare the Workpiece
- Secure the workpiece in a bench vice
- Ensure the previously drilled hole is clean and free of burrs
- Use a wire brush to remove any debris or chips
Step 2: Select the Correct Reamer
- Choose a reamer slightly larger than the drilled hole
- Select the nominal size required (for example, 10 mm reamer for a 10 mm hole)
- Ensure the reamer is clean and undamaged
Step 3: Set Up the Drilling Machine
- If using a machine reamer, mount it securely in the chuck
- Set the correct speed — reaming requires slower speeds than drilling
- Ensure the workpiece is firmly clamped in the vice
Step 4: Ream the Hole
- For hand reaming: insert the reamer squarely into the hole and turn slowly with even pressure
- For machine reaming: lower the reamer slowly into the hole at a controlled feed rate
- Keep the reamer straight to avoid oversizing or damage
Step 5: Inspect the Finished Hole
- Check the hole size using appropriate gauges or measuring tools
- Verify the surface finish is smooth
- Remove any burrs with a deburring tool if necessary
- Always wear safety goggles to protect eyes from metal chips
- Wear gloves when handling sharp tools and workpieces
- Secure the workpiece firmly in the vice before reaming
- Keep hands away from the cutting area while the machine is running
- Ensure the reamer is properly aligned before starting
- Turn off the machine before adjusting or measuring
- Oversized holes: Caused by applying too much pressure or using the wrong speed
- Rough surfaces: Result of dull reamers or incorrect feeding
- Bell-mouthed holes: Caused by the reamer tilting or not being held straight
In Tanzania, refrigeration and air conditioning technicians often use reaming when installing copper pipes for split air conditioners. For example, when mounting the indoor unit's pipe connection, a technician may drill a 12 mm hole for a mounting bracket but need to ream it to 12.5 mm to ensure a precise fit for the bolt that secures the unit to the wall, preventing vibration and extending the air conditioner's lifespan.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Select proper tools and materials
- Interpret drawings
- Mark the material
- Cut to size the material
- Locate the centre
- Perform reaming to the correct size
- Clean tools and the machine
- Store tools in proper storage
Tathmini ya matokeo
The materials drilled conform to specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain:
- How to perform reaming on a drilled hole
- How to calculate drilling speeds
Principles: The student should explain the principles involved in:
- Drilling a hole
- Selection of drilling speed on the machine
Theories: The student should explain:
- The procedures of drilling a hole
- The use of coolants in a drilling process
- Materials used to manufacture drill bits
Detailed knowledge about:
- Safety precautions when using tools and drilling machines
- Safe handling and disposal of metal chips
Swali
What is the main purpose of reaming a drilled hole?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado