Mada za sehemu hiiRepairing commercial refrigeratorsMada 5
Repairing Evaporator
The evaporator is a key component in a refrigeration system that absorbs heat from inside the refrigerator, causing the liquid refrigerant to evaporate into a gas. When the evaporator develops faults such as leaks, corrosion, or blockages, it must be repaired to restore proper cooling performance.
An evaporator is a heat exchanger found inside the refrigerator cabinet. Its main function is to absorb heat from the refrigerated space. The liquid refrigerant inside the evaporator coil evaporates (changes from liquid to vapour) as it absorbs heat, thereby cooling the interior of the refrigerator. This process is essential for preserving food and beverages in commercial refrigerators found in shops, supermarkets, and restaurants across Tanzania.
1. Leaks
Refrigerant leaks occur when the evaporator coil develops small holes or cracks. This causes loss of refrigerant, reducing the refrigerator's cooling capacity. Leaks are often caused by physical damage, corrosion, or worn joints.
2. Corrosion
Evaporator coils can corrode over time, especially in humid environments common in coastal areas like Dar es Salaam and Zanzibar. Corrosion weakens the coil walls and can lead to refrigerant leaks.
3. Blockages
Dirt, dust, mould, or ice buildup can block the evaporator coils and fins. Blockages prevent proper heat absorption and reduce cooling efficiency.
Repairing Leaks
- Locate the exact leak point using a leak detector or soapy water
- Use gas welding (brazing) to seal small holes in the coil
- For larger damage, replace the damaged section of the coil
- After repair, test again with a leak detector to confirm no leakage
Dealing with Corrosion
- Clean the corroded areas thoroughly
- Apply protective coatings to prevent further corrosion
- Replace the evaporator if corrosion is severe
Clearing Blockages
- Clean coils and fins using a soft brush, dry cloth, or compressed air
- Remove all dirt, dust, and debris
- Ensure proper airflow through the evaporator
-
Put on proper PPE – safety boots, safety goggles, overall/overcoat, and insulated gloves.
-
Disconnect the refrigerator from the power supply to prevent electrical hazards.
-
Access the evaporator by removing side panels, back panels, or other components covering it.
-
Identify the fault – check for leaks, corrosion, or blockages using visual inspection and leak detection equipment.
-
Perform the repair:
- For leaks: use a brazing torch and appropriate filler material to seal the leak
- For corrosion: clean and apply protective treatment or replace the coil
- For blockages: clean thoroughly with brushes or compressed air
-
Test for leaks after repair using a refrigerant leak detector or soapy water solution.
-
Reassemble all removed panels and components.
-
Reconnect to power and test the refrigerator to ensure it cools properly.
-
Document the repair work in the maintenance logbook.
- Screwdrivers, wrenches, and pliers
- Multimeter for electrical testing
- Soft cloth and brushes
- Refrigerant leak detector or soapy water
- Vacuum pump
- Manifold gauge set
- Refrigerant recovery machine
- Gas welding (brazing) equipment
- Personal Protective Equipment (PPE)
- Always disconnect power before working on refrigeration equipment
- Wear appropriate PPE at all times
- Use refrigerant recovery machines to properly handle refrigerants
- Ensure good ventilation when using welding equipment
- Follow manufacturer's specifications for refrigerant handling
A restaurant owner in Arusha reports that their commercial refrigerator is running continuously but not keeping the drinks cold enough. Upon inspection, you notice oil stains around the evaporator coil and suspect a refrigerant leak. Using a leak detector, you confirm the leak is at a joint in the evaporator coil. You recover the refrigerant, braze the leak using a copper filler rod, test for leaks again, evacuate the system with a vacuum pump, and recharge with the correct amount of refrigerant. After testing, the refrigerator cools properly again.
In Tanzania, small businesses such as dukas (small shops), restaurants, and supermarkets in places like Mwanza, Dodoma, and Mbeya rely on commercial refrigerators to keep sodas, fish, and perishable goods fresh. If these refrigerators stop cooling due to an evaporator problem, a trained technician can repair the evaporator coil on-site, saving the business owner from costly replacements. For example, repairing a leaking evaporator in a supermarket's cold display cabinet may cost around TZS 150,000–300,000, while buying a new refrigerator could cost over TZS 2,000,000, making repair skills valuable for both technicians and business owners.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Select tools and equipment
- Perform diagnostic troubleshooting
- Perform sheet metal works
- Perform brazing
- Perform pump down of refrigerant
- Charge refrigerant into the system
- Carry out plumbing works
- Carry out repairs on pumps
- Carry out repairs on compressors
- Clean workplace and tools
- Store tools and equipment
Tathmini ya matokeo
A record of repairs carried out conforms to technical specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Perform brazing
- Charge refrigerant
- Determines super heating and subcooling
- Fast cool products
Principles: The student should explain the principles of:
- Heat transfer
- Matter
Theories: The student should explain:
- Primary and secondary refrigeration cycles
- Freezing points of liquid mixtures for secondary and primary refrigerants
- Metering of refrigerants
- Heat conduction
- Sub cooling and super heating conditions
Detailed knowledge about:
- Safe handling of working tools
- Safe handling of measuring instruments
- Safe handling of electrical controls and other components
- Safe handling of refrigerant when discharging or charging the system
- Dismantling and assembling procedures
Swali
What is the main function of an evaporator in a refrigeration system?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado