Mada za sehemu hiiDrawing in the first-angle orthographic projectionMada 3
- Projecting blocks in the first-angle projection system
- Projecting engineering components in the first-angle projection system
- Sketching by freehand
Projecting Blocks in First-Angle Projection System
Orthographic projection is a method of representing three-dimensional (3D) objects in two dimensions (2D). It shows the object as it appears from different sides by projecting views onto perpendicular planes. This technique is used in technical drawing to create accurate, measurable drawings that clearly show the shape and size of an object from multiple directions.
In orthographic projection, we draw three main views of an object:
- Front view (Elevation) – seen from the front
- Top view (Plan) – seen from above
- Side view (End elevation) – seen from the side
First-angle projection is one of the two main systems used in orthographic drawing (the other is third-angle projection). In first-angle projection, the object is placed between the observer and the projection plane.
Symbol for First-Angle Projection
The symbol for first-angle projection consists of a cone-shaped figure inside a circle. This symbol is drawn in the bottom right corner of a drawing sheet to indicate which projection system has been used.
Position of Views in First-Angle Projection
In first-angle projection, the views are arranged as follows:
| View | Position |
|---|---|
| Front view | Top of the drawing |
| Top view | Bottom of the front view |
| Right-side view | Left of the front view |
| Left-side view | Right of the front view |
A simple way to remember: in first-angle projection, each view is drawn away from the front view in the direction from which you would look at that aspect of the object.
When drawing a square or rectangular block in first-angle projection, follow these steps:
-
Identify the object – Determine the dimensions (length, width, height) of the block.
-
Draw the front view first – This is the most important view. Draw the front face of the block showing its height and width.
-
Project the top view – From each corner of the front view, draw projection lines downward (vertically). The top view is drawn below the front view.
-
Project the side view – From each corner of the front view, draw projection lines horizontally. The side view is drawn to the side of the front view.
-
Complete the views – Draw the hidden edges (shown as dashed lines) where necessary to complete each view accurately.
-
Add dimensions – Label the actual dimensions of the block on each view.
Example: Draw the three principal views of a rectangular block measuring 60 mm (length) × 40 mm (width) × 30 mm (height) in first-angle projection.
Solution:
-
Front view – Draw a rectangle 60 mm wide and 30 mm high. This shows the length (60 mm) and height (30 mm) of the block.
-
Top view – Project downward from the front view. Draw a rectangle 60 mm long and 40 mm wide (the width of the block).
-
Side view – Project horizontally from the front view. Draw a rectangle 40 mm wide and 30 mm high.
The three views are now aligned, and all hidden edges are shown with dashed lines.
- First-angle projection places the object between the observer and the projection plane
- Each view is drawn in the direction from which you look at that aspect of the object
- All views must align correctly using projection lines
- Hidden edges are shown as dashed lines
- Always include the first-angle projection symbol on your drawing
In Tanzania, first-angle projection is used by architects and engineers when reading building plans. For example, when a civil engineer at a construction site in Dar es Salaam examines structural drawings, they use orthographic projections to understand the exact dimensions of foundation blocks or concrete columns before construction begins. This ensures buildings are constructed with correct measurements, preventing costly mistakes and ensuring structural safety.
Jinsi utakavyotathminiwaTathmini ya mchakato
Tathmini ya mchakato
Rectangular and square blocks are correctly projected in the first-angle projection system.
Swali
In first-angle projection, where is the top view (plan) drawn in relation to the front view?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado