Mada za sehemu hiiProducing detailed working drawingsMada 1
- Producing detailed working drawing
Detailed Working Drawings
A detailed working drawing is a complete technical drawing that provides all the information needed to manufacture and inspect a component. It includes dimensions, tolerances, surface texture symbols, notes, and a title block, allowing a craftsman or machinist to produce the part without needing additional instructions.
Every detailed working drawing must contain the following elements:
- Views – Orthographic projections (front, top, side) showing the true shape of the object
- Dimensions – Numerical values indicating the size of each feature
- Tolerances – Allowable variations in dimensions
- Surface texture symbols – Indications of how rough or smooth a surface should be
- Notes and specifications – Additional instructions for material, finish, or manufacturing method
- Title block – Contains information such as the drawing title, scale, date, draughtsperson's name, and drawing number
A fit describes how two mating parts (such as a shaft and a hole) go together. The three main types of fits are:
1. Clearance Fit
The shaft is always smaller than the hole, creating a loose fit with clearance. The shaft can move or rotate freely.
Example: A shaft of 20 mm diameter fitting into a hole of 20.5 mm diameter — there is 0.5 mm clearance.
2. Transition Fit
The shaft may be slightly smaller or slightly larger than the hole, resulting in a fit that is sometimes clearance and sometimes interference. Used where alignment is important but some movement may be needed.
3. Interference Fit
The shaft is always larger than the hole, requiring force to assemble. The parts are tightly secured together.
Example: A pin pressed into a gear hub — the pin must be forced into place.
Surface texture (roughness) symbols indicate the required smoothness of a surface. These symbols are placed on the drawing surface where the texture requirement applies.
| Symbol | Meaning |
|---|---|
| ⌐ | Basic surface texture symbol (roughness value required) |
| ✓ | Machining required |
| 𐄂 | Machining not required (leave as cast/forged) |
The roughness value is written above the symbol, for example: Ra1.6 means the surface should have an average roughness of 1.6 micrometres.
-
Analyse the object – Understand the shape, function, and requirements of the component to be drawn.
-
Select the necessary views – Choose the minimum number of views (usually three: front, top, and side) that clearly describe the object.
-
Draw the layout – Lightly sketch the chosen views using construction lines, ensuring proper alignment between views.
-
Add hidden details – Show internal features with hidden lines.
-
Dimension the drawing – Add all necessary dimensions with appropriate tolerances. Place dimensions outside the view where possible.
-
Add surface texture symbols – Indicate the required surface finish on each relevant surface.
-
Add notes and specifications – Include material type, heat treatment, or special manufacturing instructions.
-
Complete the title block – Fill in the drawing title, scale, date, and draughtsperson's details.
-
Check the drawing – Verify that all information is complete and accurate.
A bush (a cylindrical sleeve) is to be drawn with the following specifications:
- Outer diameter: 30 mm
- Inner diameter (bore): 20 mm
- Length: 25 mm
- Material: Brass
- Surface finish: Ra 3.2 on the outer cylindrical surface
Drawing details to include:
- Front view showing the circular outline and the inner bore
- Side view (or section) showing the length
- Dimensions with tolerances: ϕ300+0.021 mm (hole basis), ϕ20−0.033−0.020 mm (shaft)
- Surface texture symbol ⌐ with Ra 3.2 on the outer diameter
- Material note: BRASS
- Title block with scale 1:1
The completed drawing tells the machinist exactly what size to make each feature, what tolerance is acceptable, how smooth the outer surface must be, and what material to use.
In Tanzania, detailed working drawings are used in workshops and technical industries such as the Tanzania Railways Corporation, TPA Container Depot, or local fabrication workshops in Arusha and Dar es Salaam. When a mechanic needs to replace a worn bush or bearing in a vehicle or machine, they or a draughtsperson produces a detailed working drawing so that a turner can accurately machine the replacement part to the correct dimensions and surface finish.
Jinsi utakavyotathminiwaTathmini ya mchakato
Tathmini ya mchakato
Detailed working drawings are correctly produced.
Swali
Which of the following elements is NOT typically included in a title block of a detailed working drawing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado