Why Use Contrasting Coloured Yarn?
When you finish winding your warp on the warping mill, you must tie certain important points along the warp with contrasting coloured yarn. Contrasting coloured yarn is yarn that is a different colour from your main warp yarn. This yarn is also called "warp ties" or "security blankets" because they help ensure that all your hard work in counting and creating your warp does not end up in a tangled mess.
Purpose of Contrasting Coloured Yarn
The main purposes of tying contrasting coloured yarn are:
- Prevent tangling – The warp threads can easily become tangled when you remove them from the mill. Tying at intervals keeps the threads organized.
- Mark the cross – The cross (lease) is the point where warp threads cross over each other. This must be kept clear so you can thread the heddles later.
- Maintain order – Tying ensures the threads stay in their precise sequence from the beginning to the end of the warp.
- Easy identification – The different colour makes it easy to see where important ties are located.
Where to Tie the Contrasting Yarn
You must tie the contrasting coloured yarn at these five important positions:
- The beginning of your warp – at your starting peg
- A couple of places along the length of your warp – about every 2 yards apart
- Your entire cross – both "legs" of the cross and around the middle where the threads lie on top one another in an X shape
- The very end of your warp – at the turning peg
- At lease pegs – to secure the separation of yarns
Steps to Tie the Cross Using Contrasting Coloured Yarn
Step 1: Take a length of your contrasting (waste) yarn and fold it in two, with the loop facing up.
Step 2: Wrap this around your warp at the cross position, putting the live ends through the loop and pull tight. This creates a secure knot that holds the cross in place.
Step 3: Repeat this process at the beginning peg, at intervals along the warp (about every 2 yards), and at the end of the warp.
Step 4: Use a simple knot and bow for tying your cross. The bow allows you to untie it easily later when you are ready to thread the heddles.
Why Contrasting Colour?
The colour must contrast with your warp yarn so that you can easily see where the ties are located. If you use the same colour as your warp, you will have difficulty finding the ties, especially when you need to untie them to beam the warp onto the loom.
Important Tips
- Use smooth and strong waste yarn for tying – this will not stretch or break easily
- For beginners, tie at intervals of approximately 2 yards along the warp
- The tie at about 12 yards from the cross should be very tight to prevent the warp from slipping out of place while arranging it in the spreader
- Use bow knots rather than square knots so you can undo them easily later
Real-life application
In Tanzania, this skill is useful for local weavers in places like Tanga, Arusha, and Dodoma who produce kitenge and khanga fabrics using handlooms. When a small weaving business prepares warp for a new order, tying the warp with contrasting coloured yarn ensures the threads do not tangle, saving time and reducing waste when threading the loom and actually weaving the fabric.