Mada za sehemu hiiCarrying out risk assessmentMada 3
- Controlling risks
- Managing safety gear
- Managing workshop safety rules
Controlling risks means taking steps to eliminate or reduce workplace hazards before they cause harm. In handloom weaving, you work with sharp tools, moving machinery, dyes, and electrical equipment — all of which can cause injuries if not managed properly. Risk control is the final and most important step of risk assessment: after you identify a hazard and decide how serious it is, you must do something about it.
When you control risks, you should follow a hierarchy — a list of methods ranked from best to least effective. Always try the methods at the top first.
1. Elimination
Remove the hazard completely so it cannot cause harm at all. For example, if a frayed electrical cable is a shock hazard, you replace the cable entirely.
2. Substitution
Replace the hazardous tool or material with a safer one. For example, use non-toxic natural dyes instead of chemical dyes that produce harmful fumes.
3. Engineering Controls
Change the physical workplace to reduce exposure. For example, install guards on the loom's moving parts to prevent fingers from being caught.
4. Administrative Controls
Change how people work through rules and training. For example, require all students to attend a safety briefing before using the loom.
5. Personal Protective Equipment (PPE)
Provide gear that protects the worker. This is the last line of defence and includes items like gloves, aprons, safety boots, masks, and ear plugs.
Before you can control a risk, you must first identify it. Common risks in the weaving workshop include:
- Electrical hazards — damaged cords, exposed wires, overloaded sockets
- Slips, trips, and falls — loose yarn on the floor, spilled water or dye, uneven work areas
- Machinery malfunctions — loose loom parts, worn bearings, blocked safety guards
- Chemical hazards — inhalation of dye powders, skin irritation from chemicals
- Ergonomic hazards — poor posture while weaving, repetitive strain on hands and wrists
- Fire hazards — flammable dye solvents, cluttered work area near heat sources
To assess how serious a risk is, consider two factors:
- Likelihood — How likely is it that someone will be harmed? (Rare, Possible, Likely, Certain)
- Severity — How bad would the injury be if it happened? (Minor, Moderate, Severe, Catastrophic)
Multiply your answers to rank the risk. A high-ranking risk needs immediate control.
A Form 3 weaving class uses powdered synthetic dyes to colour yarn. During risk assessment, students identify that breathing in dye powder can cause respiratory irritation.
Step 1: Identify the hazard — Dust from synthetic dye powder.
Step 2: Assess the risk — Likelihood is "Likely" (students use dye every week). Severity is "Moderate" (coughing and throat irritation). Ranking = High risk.
Step 3: Apply controls using the hierarchy:
- Elimination — Not possible; dye is needed for the project.
- Substitution — Use natural dyes (like turmeric or indigo) that produce less dust.
- Engineering Controls — Work in a well-ventilated area or use a local exhaust fan.
- Administrative Controls — Train students to mix dyes with water before use to reduce dust.
- PPE — Provide dust masks for all students handling dry dye powder.
In this example, the class uses a combination of substitution, engineering controls, administrative controls, and PPE to reduce the risk to an acceptable level.
Electrical Hazards
- Check all cords and plugs for damage before use
- Keep electrical equipment away from water
- Do not overload sockets
- Report faulty equipment to the instructor immediately
Slips, Trips, and Falls
- Keep walkways clear of yarn, tools, and waste
- Clean up spills immediately
- Wear safety boots with rubber soles for grip
Machinery Hazards
- Never operate the loom without proper training
- Keep guards in place on all moving parts
- Tie back long hair and remove loose jewellery
- Stop the machine before adjusting yarn or threads
Chemical Hazards
- Use gloves and aprons when handling dyes
- Work in ventilated areas
- Store chemicals in labelled containers away from food
- Wash hands after handling any dye or chemical
Your group will be assigned one risk (electrical hazards, slips/trips/falls, or machinery malfunctions). Complete the following:
- Describe the hazard clearly.
- State who might be harmed and how.
- Rate the likelihood and severity.
- List at least two control measures from the hierarchy that you would apply.
- Explain why your chosen controls are appropriate for the handloom weaving workshop.
Present your findings to the class.
In Tanzania, many small-scale weavers operate from home workshops or market stalls in places like Arusha, Dodoma, or Mwanza. Before starting a weaving business, a young entrepreneur would use risk control skills to identify hazards — such as dusty dye powder in a small room or worn-out electrical wiring — and apply controls like installing windows for ventilation, replacing damaged cords, and buying gloves and masks. These simple steps prevent injuries and help the business run smoothly without unexpected medical costs or workshop closures.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools and equipment
- Observe safety precaution
- Identify risks
- Conduct risk assessment
- Implement risk control strategies
- Conduct monitoring and review
- Make continuous improvement
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Risks are controlled properly
Tathmini ya maarifa
Knowledge evidence: Detailed knowledge of:
Method used: The student should explain how to: Control risks
Principles: The student should be able to explain the principles of: Controlling risks
Theories: The student should explain:
- How to carry out risk assessment,
- Describe the Objectives of risk control
- Interstratifies for Risk Control
- The importance of controlling risk at the workplace
- Conduct safety training
- Identify safety hazard material Circumstantial knowledge Detailed knowledge of:
- Safety precautions while carrying out risk management
- Safe handling of tools and equipment
- Waste disposal
- Handling safely hazard material
Swali
What is the first and most effective step in the hierarchy of control measures?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado