Mada za sehemu hiiMaking twill weave variationsMada 2
- Making pointed/reverse twill
- Making crow weave
Pointed twill, also called reverse twill, is a twill weave variation where the diagonal direction of the twill line changes direction at a central point, forming a "V" or "point" pattern on the fabric. This creates a distinctive zigzag effect that adds visual interest to woven cloth.
In a regular twill, the warp threads float over weft threads (or vice versa) in a consistent diagonal direction, either to the right or left. In pointed twill, the direction of these diagonals reverses at a specific point, creating a mirrored pattern. The key mechanism involves:
- Point of reversal: The exact position where the twill direction changes
- Controlled lifting: Following a lifting plan that reverses the shed formation
- Balanced structure: Equal number of left-hand and right-hand twill sections
- Handloom with warped warp
- Shuttles (at least two for different colored weft)
- Pattern draft showing the weave structure
- Warp plan and lifting plan
- Tape measure, scissors
- Dust coat and face mask for safety
A pattern draft for pointed twill shows the weave structure in a grid format:
- Each vertical column represents a warp thread
- Each horizontal row represents a weft thread
- Shaded squares show where warp floats over weft
- The draft indicates where the reversal point occurs
Example of a simple 4/1 pointed twill structure:
| Warp → | 1 | 2 | 3 | 4 | 3 | 2 | 1 |
|---|---|---|---|---|---|---|---|
| Weft 1 | ■ | ■ | ■ | ■ | |||
| Weft 2 | ■ | ■ | ■ | ■ | |||
| Weft 3 | ■ | ■ | ■ | ■ | |||
| Weft 4 | ■ | ■ | ■ | ■ |
The diagonal moves right, then reverses and moves left from the center.
Step 1: Prepare Your Warp and Loom
Ensure your handloom is properly warped with the required number of ends. Count and confirm the warp threads match your pattern draft.
Step 2: Study the Lifting Plan
The lifting plan tells you which harness shafts to raise for each pick (weft row). For pointed twill, you will follow a sequence that creates the reversal:
- For the first half: follow regular twill lifting sequence
- At the reversal point: change the lifting sequence to reverse the twill direction
- For the second half: continue with reversed diagonal pattern
Step 3: Set Up the Shuttles
Load your shuttle with the selected weft color. For pointed twill, you may use one color throughout or alternate colors to emphasize the pattern.
Step 4: Weave the First Section
Throw the shuttle through the shed, beat up firmly with the reed, and repeat. Follow the lifting plan for the first half of the pattern until you reach the reversal point.
Step 5: Reverse the Direction
At the reversal point, change your lifting sequence. The harnesses that were raised before should now be lowered in the opposite order. This creates the "point" where the twill changes direction.
Step 6: Complete the Pattern
Continue weaving, maintaining even tension and consistent beat-up. The second half of your fabric should mirror the first half, creating the pointed or V-shaped twill effect.
Specifications:
- 8 warp threads
- 4/1 twill structure
- Reversal at pick 4
Lifting sequence:
- Picks 1-4: Follow regular 4/1 twill (right-hand direction)
- Picks 5-8: Reverse the sequence (left-hand direction)
Draft notation for picks 1-4:
- Pick 1: Raise heddle 4 only
- Pick 2: Raise heddles 3 and 4
- Pick 3: Raise heddles 2, 3, and 4
- Pick 4: Raise heddles 1, 2, 3, and 4
Draft notation for picks 5-8 (reversed):
- Pick 5: Raise heddles 1, 2, 3 (mirror of pick 3)
- Pick 6: Raise heddles 1, 2 (mirror of pick 2)
- Pick 7: Raise heddle 1 (mirror of pick 1)
- Pick 8: No heddle raised (completion point)
When woven, this produces a fabric with a visible "V" or chevron pattern running diagonally across the surface.
- Check that the reversal point is exactly centered
- Ensure even spacing between picks
- Verify that the twill lines are continuous at the reversal point
- Maintain consistent weft tension throughout
- Forgetting to reverse the lifting sequence at the correct pick
- Uneven beat-up causing irregular fabric density
- Not following the pattern draft accurately
- Inconsistent weft tension creating wavy edges
Always wear your dust coat and face mask when weaving to protect from fiber dust. Keep fingers away from the reed teeth and maintain a safe distance from the shuttle while throwing.
In Tanzania, pointed twill weaving is commonly used to produce kangas and kitenges with distinctive chevron or "V" patterns that are culturally significant. A small-scale weaver in Mwanza or Arusha might apply this technique to create fabrics for local markets, using the reversible pattern to produce distinctive designs that appeal to customers seeking traditional woven cloth with modern visual effects.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools and equipment
- Observe safety regulations at the workplace
- Read the pattern draft
- Read the warp plan
- Read lifting plan
- Thread the loom
- Weave the pattern
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Pointed/reverse twill is made properly
Tathmini ya maarifa
Knowledge evidence: Detailed knowledge of:
Method used: The student should explain how to: Make pointed/reverse twill
Principles: The student should be able to explain the principles of: Making pointed/reverse twill
Theories: The student should explain: what is meant by “finger manipulated “picking? Loom-controlled mechanism of pointed/reverse twill Mechanism of an irregular threading pattern on a 2- shaft loom
Circumstantial knowledge:
Detailed knowledge of: Safe handling of working tools Workshop safety precautions
Swali
What is the main characteristic of pointed twill weave?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado