Mada za sehemu hiiConstructing staircaseMada 4
- Constructing formwork
- Fixing reinforcements
- Laying concrete
- Fixing balusters/hand rails
Constructing Formwork
Formwork is a temporary structure that moulds and supports fresh concrete until it becomes strong enough to support itself. It gives concrete its final shape in beams, columns, and slabs. Without proper formwork, concrete structures would collapse or take incorrect shapes.
Formwork serves three main functions:
- Moulding: It gives concrete the desired shape and surface finish
- Support: It bears the weight of wet concrete, reinforcement, and construction loads
- Protection: It holds concrete in place until it gains sufficient strength
Formwork can be made from:
- Timber (softwood or hardwood planks) — common and easy to work with
- Plywood — smooth surface, reusable for several pours
- Metal sheets — durable, used for large-scale projects
- Combined systems — timber for framing, plywood or metal for sheathing
A complete formwork system has four main parts:
- Sheathing (formwork face) — the surface that contacts concrete; made of plywood or metal sheets
- Bearers — horizontal members that support the sheathing
- Props or shores — vertical supports that transfer loads to the ground
- Bracing and struts — diagonal members that prevent movement and ensure stability
Step 1: Planning and Measurement
- Read the construction drawings to determine sizes of beams, columns, or slabs
- Measure and mark all dimensions accurately using measuring tapes and rulers
Step 2: Cutting Materials
- Cut timber and plywood to required sizes using handsaws or circular saws
- Ensure all cuts are straight and precise
Step 3: Assembling the Sheathing
- Fix the sheathing (plywood or metal sheets) to the bearers using nails or screws
- Ensure joints are tight to prevent concrete leakage
Step 4: Installing Props and Supports
- Erect vertical props at proper spacing to support the formwork
- Use spirit levels to ensure formwork is perfectly horizontal or vertical
- Secure props with clamps and bracing to prevent swaying
Step 5: Checking Alignment
- Verify all dimensions and levels before pouring concrete
- Make adjustments as necessary
Step 6: Applying Release Agent
- Coat the formwork face with oil or release agent to prevent concrete from sticking
Always observe safety when working with formwork:
- Wear hard helmets, safety boots, gloves, and safety goggles
- Check all props and supports for stability before climbing
- Use proper scaffolding when working at height
- Keep the work area clear of loose nails and debris
- Work in teams when lifting heavy formwork panels
A mason needs to construct formwork for a rectangular concrete beam with the following dimensions:
- Length = 4.0 m
- Width = 0.25 m
- Height = 0.40 m
Calculate the area of sheathing required for both sides of the beam (bottom and two sides).
Solution
The sheathing covers:
- Bottom: 4.0 m×0.25 m=1.00 m2
- One side: 4.0 m×0.40 m=1.60 m2
- Other side: 4.0 m×0.40 m=1.60 m2
Total sheathing area = 1.00+1.60+1.60=4.20 m2
Therefore, the mason should cut plywood sheets totalling at least 4.20 square metres.
- Formwork must be strong enough to hold wet concrete without deformation
- Props should be spaced according to the load and material specifications
- Always check alignment with a spirit level before concrete is poured
- Remove formwork only after concrete has gained sufficient strength (usually 21–28 days for beams and slabs)
- Clean and store formwork materials properly after use to extend their lifespan
In Tanzania, construction of modern buildings in cities like Dar es Salaam and Arusha often requires formwork for beams and floor slabs. A small-scale contractor building a two-storey house in Mwanza would need to construct proper formwork for each floor's concrete slab. If the slab is 6m × 8m, the contractor must calculate and purchase the correct amount of plywood and timber props, ensuring safety while keeping material costs within a budget of approximately TSh 500,000–800,000 for the formwork materials alone.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Construct formwork for the staircase.
- Measure and cut materials accurately for formwork.
- Assemble formwork securely to maintain shape during concrete pouring.
- Ensure formwork is level and aligned correctly.
- Reinforce formwork to prevent movement during the curing process.
Tathmini ya matokeo
Formwork constructed in compliance with structural design specifications and construction standards
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should explain the procedures for designing and constructing formwork for staircases
Principles: The student should explain the principles involved in constructing formwork
Theories:
- The students should explain:
- The role of formwork in shaping staircases and ensuring safety during construction.
- The impact of quality formwork on the final appearance an d functionality of the staircase. Circumstantial Knowledge: Knowledge about:
- Selection of materials suitable for staircase formwork.
- Safety practices during assembly and dismantling of formwork.
Swali
What are the three main functions of formwork in concrete construction?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado