Mada za sehemu hiiPerforming floor finishMada 3
- Performing granolithic floor finish
- Performing monolithic finish
- Performing floor and wall tiles
Performing Floor and Wall Tiles
Floor and wall tiling is the process of covering horizontal floor surfaces and vertical wall surfaces with tiles to enhance appearance, protect against moisture, and create a durable, easy-to-clean surface. This skill is essential in bathrooms, kitchens, and other areas where hygiene and aesthetics are important.
Floor tiling covers the floor surfaces with tiles, while wall tiling covers vertical surfaces such as walls in bathrooms, kitchens, and other areas. Both types of tiling enhance the appearance of a room and protect surfaces from moisture and damage.
Types of Tiles
- Ceramic tiles – Made from clay, these are common and affordable
- Marble tiles – Natural stone with elegant appearance
- Granite tiles – Very hard and durable
- Quarry tiles – Unglazed tiles made from natural materials
Tiles come in various shapes, thicknesses, sizes, and colours to suit different needs and preferences.
Tiles can be fixed using one of two main methods:
1. Cement Mortar Method
This uses a mixture of sand, cement, and water in a ratio of 1:3. The mortar should be consumed within one hour after mixing.
Advantages:
- Strong and durable bond
- Versatile for various tile types and surfaces
Disadvantages:
- Takes longer to dry
- More labour-intensive to apply
2. Rubber-Based Adhesive Method
Pre-mixed adhesive that is ready to use.
Advantages:
- Easy to apply and clean up
- Sets quickly, allowing faster installation
Disadvantages:
- Not recommended for high-moisture areas
- Generally more expensive than cement mortar
Step 1: Check the Tiles
Before starting, verify that all tiles have uniform thickness and size. Sort out any damaged or irregular tiles.
Step 2: Prepare the Surface
The floor or wall surface must be:
- Clean – Free from dust, dirt, and debris
- Dry – No surface water present
- Level – Even and uniform
- In good condition – No cracks or loose material
Step 3: Prepare the Bedding Mortar
For fixing tiles on concrete or plastered surfaces, apply a mortar layer of 25mm to 30mm thickness. This provides a stable base for the tiles.
To improve adhesion, apply cement slurry (a thin mixture of cement and water) to:
- The prepared surface
- The bottom and sides of each tile before placing
Step 4: Fix the Tiles
- Spread the mortar or adhesive evenly on the prepared surface using a notched trowel
- Press each tile firmly into place using a wooden or rubber hammer
- Use spacers between tiles to ensure even spacing (typically 5mm joints)
- Work systematically from one corner to the opposite end
- Leave tiles to bond for 24 hours before walking on them or proceeding to grouting
Step 5: Cut Tiles Where Necessary
Use a tile cutter or wet cutter to cut tiles to fit edges, corners, and around fixtures. Always measure carefully before cutting.
Step 6: Apply Grout
After 24 hours, the joints between tiles should be:
- Raked to a width of approximately 5mm
- Cleaned of any loose material
- Filled with grout using a rubber float or squeegee
Step 7: Seal the Grout
Apply sealant over the grout to:
- Protect against moisture penetration
- Prevent staining
- Make cleaning easier
Step 8: Final Inspection
Check for:
- Uneven areas that need correction
- Gaps in grout lines that need touching up
- Any cracked or loose tiles
| Tool | Purpose |
|---|---|
| Tile cutters and wet cutter | Cutting tiles to required sizes |
| Spacers | Maintaining even gap between tiles |
| Notched trowel | Spreading adhesive or mortar evenly |
| Rubber float | Applying grout to joints |
| Spirit level | Ensuring tiles are level |
| Measuring tape | Taking accurate measurements |
| Tile nippers | Trimming small sections of tiles |
Always wear appropriate personal protective equipment (PPE) when performing tiling work:
- Safety boots – Protect feet from heavy materials
- Gloves – Protect hands when handling tiles and chemicals
- Helmets – Protection in construction areas
- Overalls – Protect clothing and skin
Problem: A small bathroom floor measures 2 metres by 1.5 metres. The tiles are 300mm × 300mm. How many tiles are needed if 10% extra is allowed for cutting and breakage?
Solution:
-
Calculate the floor area: Area=2m×1.5m=3m2
-
Calculate the area of one tile: Tile area=0.3m×0.3m=0.09m2
-
Calculate the number of tiles needed (without extra): Number of tiles=0.093=33.33≈34 tiles
-
Add 10% extra for cutting and breakage: Extra tiles=34×0.10=3.4≈3 tiles
-
Total tiles needed: Total=34+3=37 tiles
Answer: 37 tiles are required.
- Floor and wall tiles protect surfaces and enhance appearance
- Common tile types: ceramic, marble, granite, and quarry tiles
- Two fixing methods: cement mortar (1:3 ratio) or rubber-based adhesive
- Mortar thickness: 25mm to 30mm
- Joint spacing: approximately 5mm
- Tiles must bond for 24 hours before grouting
- Grout should be sealed for protection
In Tanzania, tilers are commonly needed for renovating homes, building new houses, or working on commercial projects like hotels and offices in cities such as Dar es Salaam, Arusha, and Mwanza. A Form 2 student who masters tile installation can assist local artisans or start a small tiling business, charging between TSh 5,000 to TSh 10,000 per square metre for floor tiling work in their community.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Clean and prepare surfaces for tiling
- Measure and mark the layout for tiles to ensure alignment
- Mix adhesive and apply it evenly to the surface
- Lay tiles in alignment, maintaining proper spacing with spacers
- Apply grout to fill joints and smooth the surface
- Inspect the tiled surface for alignment, uniformity, texture and coverage
- Clean tools and equipment after use
Tathmini ya matokeo
The installation of floor and wall tiles is conducted according to safety and construction standards to ensure a durable and aesthetically pleasing finish.
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should be able to explain procedures for tiling, including surface preparation, adhesive application, tile placement, and joint grouting.
Principles: The student should explain the principles involved in performing floor and wall tiles.
Theories: The student should explain:
- Tile characteristics and properties
- Material composition
- Application techniques
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions to be observed while performing tasks
- First aid
- Environmental issues
Swali
Which of the following is NOT a type of tile commonly used for floor and wall tiling?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado