Mada za sehemu hiiInstalling soil appliancesMada 3
- Installing water closet (WC)
- Installing flushing cisterns
- Installing urinals, baths, sinks and basins
A flushing cistern is a tank that stores water for flushing water closets (toilets). It releases a measured amount of water when activated to wash away waste. Proper installation ensures efficient operation, prevents leaks, and maintains hygiene in sanitation systems.
1. Close-Coupled Cistern
This type sits directly on top of the WC pan. The cistern and pan form a single unit, making installation straightforward. It is commonly used in modern buildings.
2. Concealed Cistern
This type is hidden inside the wall or behind a false panel. Only the flush button is visible. It saves space and provides a modern appearance but requires more complex installation.
3. Low-Level Cistern
This type is mounted on the wall at a low height, connected to the WC pan by a flush pipe. It is commonly found in older buildings.
4. High-Level Cistern
This type is mounted high on the wall, connected to the WC pan by a long pipe. It uses gravity to create strong flushing force.
- Tank: Stores water for flushing (typically 6-9 litres for full flush)
- Flush valve: Opens to release water into the WC pan
- Fill valve: Automatically refills the cistern after flushing
- Float: Controls the water level in the tank
- Overflow pipe: Drains excess water to prevent overflow
- Flush button/handle: Activates the flush mechanism
- Inlet: Connection point for the water supply pipe
Step 1: Prepare the Installation Area
- Clear and level the floor where the WC will stand
- Verify the positions of drainage and water supply connections
- Ensure the wall is strong enough to support a wall-mounted cistern
Step 2: Position the WC Pan
- Place the WC in position, ensuring the outlet aligns with the drainage pipe
- Mark the floor fixing points through the holes in the WC base
- Drill holes at marked points and insert wall plugs
- Secure the WC firmly using screws
Step 3: Connect the WC to Drainage
- Attach the WC connector securely to the WC outlet and drainage pipe
- Seal the connection thoroughly with silicone sealant to prevent leaks
Step 4: Mount the Cistern
For close-coupled cisterns:
- Position the cistern on the WC pan
- Ensure proper alignment between the cistern outlet and WC inlet
For wall-mounted cisterns:
- Mark fixing points on the wall using a spirit level to ensure vertical alignment
- Drill holes at marked points and insert wall plugs
- Secure the cistern with fixing screws
Step 5: Connect Water Supply
- Connect the flexible water supply hose from the water source to the cistern inlet valve
- Use Teflon tape on threaded joints to prevent leaks
Step 6: Test the Installation
- Turn on the water supply and fill the cistern
- Check all connections and fittings for tightness and leaks
- Perform a test flush to ensure proper functionality
- Inspect for any faults and rectify immediately if necessary
| Problem | Possible Cause | Solution |
|---|---|---|
| Weak flush | Low water level in cistern | Adjust the float to increase water level |
| Continuous running water | Faulty fill valve or float | Replace the fill valve or adjust the float |
| Leaks at connections | Loose fittings or damaged seals | Tighten fittings or replace seals |
| Cistern not filling | Blocked inlet valve | Clean or replace the inlet valve |
Modern flushing cisterns often include water-saving features:
- Dual-flush systems: Provide 3-4.5 litres for liquid waste and 6-9 litres for solid waste
- Adjustable flush volume: Allow users to set the amount of water per flush
- Delayed fill valves: Prevent water waste by filling slowly after each flush
These features help reduce water consumption and lower water bills.
- Wear gloves, safety boots, and eye protection during installation
- Ensure the water supply is turned off before starting work
- Check for hidden pipes or cables before drilling
- Use proper lifting techniques when handling heavy cisterns
- Ensure the cistern is securely mounted to prevent falls
A school in Mwanza needs to install a new WC with a close-coupled cistern in their toilet block. The mason has already prepared the floor and connected the drainage pipe. Now, he must install the cistern.
Steps:
- Place the cistern on the WC pan, ensuring the outlet sits properly in the pan opening
- Insert the fixing bolts through the holes and tighten evenly
- Connect the flexible water supply hose to the inlet valve
- Turn on the water supply and check for leaks
- Adjust the float to set the water level at the correct height (typically 20mm below the overflow pipe)
- Test the flush mechanism three times to ensure proper operation
This installation ensures the WC functions efficiently and saves water through proper level adjustment.
- Always ensure proper alignment between the cistern outlet and WC inlet
- Use watertight seals to prevent leaks
- Maintain a gradient of 1:40 to 1:60 for waste pipes
- Test all connections before completing the installation
- Follow manufacturer guidelines for specific cistern models
In Tanzania, a mason working on a construction site in Dar es Salaam would use these skills when installing flushing cisterns in new housing projects or renovating bathrooms in existing buildings. For example, when building a public toilet at a market in Arusha, proper cistern installation ensures the toilet remains functional, hygienic, and water-efficient, which is important for market vendors and customers who rely on clean sanitation facilities.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings
- Prepare the Installation Area
- Install the Mounting Brackets
- Attach the Flush Valve,
- Position the Cistern
- Secure the Cistern
- Connect the Water Supply
- Check for Leaks
- Test the Flush Mechanism
- Clean and store tools
Tathmini ya matokeo
Flushing cisterns are installed according to plumbing codes and manufacturer specifications to ensure effective operation and compliance with overall system requirements
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain different procedures of installing flushing cisterns
Principles: The student should explain the principles involved in installing flushing cisterns
Theories: The student should explain:
- Setting out
- Constructing drainage
- Importance of levels
- Specifications when setting out and installing soil appliances
- The importance of ventilation
- Flushing system
- Waste Management Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions to be observed while installing soil appliances Environmental requirements
Swali
Which type of flushing cistern is hidden inside the wall with only the flush button visible?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado