Mada za sehemu hiiHandling accidents and incidentsMada 5
- Handling mechanical hazards
- Handling physical hazards
- Handling chemical hazards
- Handling electrical hazards
- Handling ergonomic hazards
Handling Ergonomic Hazards
Ergonomic hazards are workplace conditions or factors that can cause strain, discomfort, or injury to the body because of poor fit between the worker and their work environment. In a civil draughting workshop, these hazards arise when tools, workstations, or tasks do not match the worker's body size, posture, or physical abilities. Common ergonomic injuries include back pain, eye strain, wrist pain, and neck stiffness.
The following are common causes of ergonomic hazards in a civil draughting workshop:
- Poor workstation height — Tables or drawing boards set too high or too low force the body into uncomfortable positions.
- Inadequate lighting — Poor lighting causes eye strain and forces the worker to lean closer to drawings.
- Uncomfortable seating — Chairs without proper back support lead to back pain during long drafting sessions.
- Repetitive motions — Continuous use of pens, pencils, or computer mice without breaks causes hand and wrist fatigue.
- Incorrect posture — Slouching or leaning over the drafting table strains the neck and back.
- Poorly designed tools — Pencils or pens that are too thick or too thin cause hand discomfort.
Follow these steps to handle ergonomic hazards in accordance with engineering standards:
- Adjust your workstation — Set the drafting table or computer desk at a height that allows your elbows to rest comfortably at a 90-degree angle.
- Use proper lighting — Position your work area so that light comes from the side or behind you, not directly in front, to reduce eye strain.
- Choose supportive seating — Use a chair with back support and adjust its height so your feet rest flat on the floor.
- Take regular breaks — Every 30 to 45 minutes, stand up, stretch, and rest your eyes for a few minutes.
- Maintain good posture — Sit upright with your shoulders relaxed and keep your back against the chair.
- Use ergonomic tools — Select pencils and pens that fit comfortably in your hand, and use computer mice with proper grip support.
Worked Example
A Form 1 student named Juma spends three hours completing a technical drawing. After the session, Juma feels pain in his neck and wrist. The ergonomic hazards causing this discomfort are:
- The drafting table is too high, forcing Juma to raise his shoulders.
- The chair has no back support, causing him to slouch.
- Juma did not take any breaks during the three-hour period.
To handle these hazards, Juma should:
- Adjust the table height or use a footrest to maintain a comfortable posture.
- Use a chair with proper back support.
- Take a short break every 45 minutes to stretch and rest his eyes.
In Tanzania, many young artisans and technicians work in small workshops doing metalwork, carpentry, or electrical repairs. By applying ergonomic principles, a student in Arusha working as an apprentice in a welding workshop can adjust their workbench height and take regular breaks to prevent back pain and eye strain. This helps them work more comfortably and safely, reducing the risk of long-term injury while earning a living.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Administer first aid to person involved in accidents related to chemical, electrical, physical, mechanical, and ergonomic hazards
- Use service manual
- Interpret workshop rules and regulations
- Respond correctly and safely when faced with an emergency
- Identify and use all emergency equipment and supplies
- Locate first aid kit
- Administer artificial respiration
- Take necessary steps to save the victim
- Report to superiors
- Record accidents
- Make periodic inspection of workshop area and equipment
- Identify hazardous materials
- Handle hazardous materials
- Use colour code and know what each colour represents
- Handle mechanical and electrical equipment
- Follow the rules for handling compressed air
- Follow good environmental practices
- Handle machines
- Use safety gear
- Clean tools, equipment, and workplace
- Store tools and equipment
Tathmini ya matokeo
Machines, equipment, and chemicals as well as accidents and incidents are handled, according to workshop rules and regulations
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Identify hazardous materials
- Handle hazardous materials
- Use safety gears
- Use colour code and safety signs
- Assist an accident victim
- Assist an unconscious victim
- Assist a fire victim
- Carry out first aid
- Respond correctly and safely when faced with emergency
Principles: The student should explain the principles of:
- Classifying hazards
- Handling hazardous materials
- Identifying hazardous materials
- Cardiopulmonary resuscitation
- resuscitation
- Emergency life support
Theories: The student should explain:
- Effects of mechanical, chemicals, and physicals hazards
- Emergency life support
- Treatment for electric shock
- Treatment for burns
- Treatment for fractures
- Treatment for an unconscious person
- Importance of using safety gears
- Advantages of accidents preventions
- Usage of colour code and safety signs
- Reading manufacturer’s instruction before operating machine Detailed knowledge about:
- Safety precautions while handling accidents and incidents
- Safe handling of tools, equipment, and machines
- Waste disposal methods
- Respiratory and circulatory systems
- Basic functions of the human body
Swali
Which of the following best describes ergonomic hazards in a civil draughting workshop?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado