Mada za sehemu hiiIdentifying structural building materialsMada 5
- Identifying stones
- Identifying concrete
- Identifying bricks and blocks
- Identifying timber
- Identifying metal materials
Metals are solid materials that are hard, lustrous, malleable, ductile, fusible, and have good heat and electrical conductivity. These properties make metals essential materials in building and construction.
Classification of Metals
Metals are divided into two main categories:
- Ferrous metals contain iron. Examples: steel, wrought iron, and cast iron.
- Non-ferrous metals do not contain iron. Examples: aluminium, copper, zinc, lead, and brass.
Iron and Its Alloys
The types of iron used in construction depend on carbon content:
Cast iron contains high carbon (approximately 2–4.3%). It is hard and brittle. Uses: drain pipes, water supply main pipes, and chamber covers (sanitary equipment).
Wrought iron contains low carbon (less than 0.1%). It is tough, malleable, and nearly pure. Uses: furniture, grills, and forged gates.
Steel is an alloy of iron with less carbon than cast iron. Four categories exist:
- Mild steel
- Medium steel
- Hard steel
- Stainless steel
Medium steel is most used in construction because it balances high strength and ductile behavior. Uses: parking garages, industrial sheds, reinforced rods, water pipes, water tanks, rainwater catchment systems, corrugated iron sheets, and welding sheets.
Stainless steel is a corrosion-resistant alloy of iron, carbon, and chromium. It resists staining and corrosion, has a smooth shiny appearance, and is strong. Uses: structural supports, cladding, and handrails.
Aluminium
Aluminium is used in buildings for roofing sheets, doors, window frames, mortice locks, and sanitary appliances. It reflects sunlight and helps keep buildings cool.
Copper
Copper is strong, durable, and conducts well. Uses: pipes, water taps, sanitary appliances, and electrical products such as wire and accessories.
Brass
Brass is a copper-zinc alloy. Uses: fasteners and ironmongery (door and window accessories).
Zinc
Zinc is a whitish-blue metal. Uses: sheets for roof covering and galvanising iron products to prevent rusting.
Lead
Lead is a bluish-white metal that is soft and heavy. It was previously used for pipes and roofing sheets but is now rarely used because of its toxicity. Lead pipes are now mainly used for wastewater collection.
Bronze
Bronze is a copper-based alloy with approximately 12–12.5% tin, plus other metals like aluminium, manganese, nickel, or zinc. It is tougher than copper alone and resists saltwater corrosion. Uses: underwater bearings, ship propellers, and boat fittings.
- Malleable and ductile
- Good conductors of heat and electricity
- Lustrous and can be polished
- Strong and tough
- Solids at room temperature (except mercury, which is liquid)
Due to their essential properties, metals are widely used in construction:
- Structural support and reinforcement
- Roofing and cladding
- Window frames and doors
- Plumbing and water supply systems
- Heating equipment
- Sanitary appliances
When identifying metal materials in buildings, observe their:
- Appearance – color, luster, and finish
- Location – where the metal is used in the structure
- Form – sheets, pipes, frames, or structural sections
Example: In a school building in Tanzania, you may find:
- Galvanised iron sheets (corrugated) on roofs
- Aluminium doors and window frames
- Copper pipes in plumbing
- Stainless steel handrails
- Cast iron chamber covers
In Tanzania, when constructing a house in a local area like Mwanza or Arusha, a builder selects metal materials based on their properties and cost. For roofing, galvanised iron sheets (made from zinc-coated steel) are commonly used because zinc protects the steel from rust, and the sheets are affordable at local hardware shops — a bundle may cost around TZS 150,000 to 250,000 depending on gauge. For plumbing, copper pipes are preferred for their durability, though PVC is also used as a cheaper alternative.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Explain the meaning of metals
- Explain types of metals and their properties
- Explain uses of metals in construction
- Differentiate metals from nonmetals
Tathmini ya matokeo
Properties and uses of metal explained and differentiated
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain types of metals
Principles: The student should explain principles involved in:
- Identifying types metals
Theories: The student should explain: -
- Types of metals
- Uses of metals Circumstantial Detailed knowledge about:
- Observation of standards
Swali
Which of the following metals is classified as a ferrous metal?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado