Mada za sehemu hiiAdapting building construction techniquesMada 5
- Adapting foundation construction techniques
- Adapting floors construction techniques
- Adapting wall construction techniques
- Adapting ceiling construction techniques
- Adapting stairs construction techniques and details
Adapting Stairs Construction Techniques and Details
A stair is a structure having a series of steps between flights which facilitates movement from lower to higher levels and vice versa. This element will enable you to describe different types of stairs, draw stair details, and construct stairs.
Understanding the various parts of a staircase is essential for both design and construction.
Main Structural Components
Step: The basic unit of a stair, consisting of a horizontal tread and a vertical riser.
Tread (T): The upper horizontal part of the step where the foot is placed when ascending or descending.
Riser (R): The vertical portion of the step between two consecutive treads.
Flight: A series of steps between floor levels and landings, without any intermediate landing.
Landing: A horizontal platform between two flights that serves as a rest point and allows direction changes.
Stringer (or String): The sloping structural member that supports the treads and risers. It runs along the slope of the stairs.
Safety and Finishing Components
Nosing: The part of the tread that extends beyond the riser, providing extra foot space and visual clarity.
Handrail: A rail fixed parallel above the pitch line at the sides of a stair for support.
Baluster: Vertical or horizontal members that support a handrail.
Balustrade: The complete assembly consisting of a handrail and balusters.
Newel Post: A vertical component that supports a handrail at the beginning, end, or turn of a staircase.
Soffit: The underside surface of a stair.
Headroom: The clear vertical distance between the slope line adjoining the tread and the soffit of the floor above.
Stairs are classified based on their shape and configuration. The main types are:
1. Straight Flight Stair
A single straight flight connecting two levels, like a ladder. It may include one or more landings. This is the simplest and oldest type of stair.
Advantages: Easy to build, cost-effective, material flexibility, space-efficient.
Disadvantages: Lacks privacy between floors, safety risks, uncomfortable for children and elderly.
2. Quarter Turn Stair (L-shaped)
Changes direction at a right angle (90°) either to the left or right. At the turn, a quarter-space landing or winders (triangular steps narrower on one side) may be used.
Advantages: Provides visual barrier between floors, safer due to central landing.
Disadvantages: Requires support at landing, more difficult to construct.
3. U-shaped Stair (Dog-legged or Open Well)
Two parallel flights that turn 180° in direction, connected by a landing. In dog-legged stairs, flights are in opposite directions with no space between them. In open well stairs, there is an opening between flights.
4. Bifurcated or Split Stair
A wide flight at the bottom that splits into two narrower flights at a landing, one turning left and one turning right. Commonly used in public buildings for large volumes of people.
5. Curved Stair
Helical stairs that lead upstairs in a curved manner. Has rolled stringers with treads attached between them (wooden and steel) or is monolithic (concrete).
6. Spiral Stair
Steps wind around a fixed central post or column. Very compact design that uses minimal space. Steps are anchored around a central pole.
When designing stairs, the following requirements must be considered:
- Location: Stairs should be in easily accessible locations with sufficient light and ventilation.
- Headroom: Minimum clear headroom of 2000 mm above the pitch line.
- Width: Depends on the building's purpose and importance.
- Riser and Tread Relationship: The formula is: 2R+T=550 to 720 mm. The preferred riser height is less than 175 mm.
- Angle of Pitch: Maximum 40°, minimum 25°. Above 40° is considered a ladder.
- Handrail Height: Minimum 900 mm for user safety.
- Balustrades: Required for open well stairs. No openings should allow passage of a 100–150 mm sphere.
- Landing Length: Minimum length equal to the width of the flight.
Step 1: Select Material
Choose appropriate building material (concrete, timber, steel, or combination).
Step 2: Select Stair Type
Choose the type of stair suitable for the building's function and available space.
Step 3: Determine Dimensions
Establish the height between floors and determine riser height, tread depth, and flight width.
Step 4: Calculate Number of Rises and Treads
Use the following formulas:
Number of Riser(R)=Height of riserTotal floor height
Number of Tread(T)=Number of Riser−1
Step 5: Produce Drawings
Create basic and detailed annotated drawings using an appropriate scale.
Given: A residential building with floor-to-floor height of 3000 mm. Using riser height of 150 mm and tread depth of 300 mm.
Solution:
-
Calculate number of risers: R=1503000=20 risers
-
Calculate number of treads: T=20−1=19 treads
-
Verify the formula: 2R+T=2(150)+300=600 mm This falls within the acceptable range of 550–720 mm.
-
Calculate flight length: Length=19×300=5700 mm
-
Check headroom requirement (2000 mm minimum) is met.
Drawing a Wooden Stair Plan (Four Steps)
- Draw tread and riser lines: Draw lines showing the number of treads, risers, and width. Include nosing (typically 25 mm).
- Add direction arrow: Place an "UP" arrow at the centre to show direction. Number the steps from bottom to top.
- Draw balustrades: Add lines showing handrails and balusters.
- Add cutline: Assume horizontal cut at 1 m height. Use dashed lines for stair lines above the cutline.
Drawing a Stair Section
- Draw a section line on the plan with viewing direction.
- Draw the section showing treads, risers, balusters, newel posts, flight height, and run. Include cross-reference circles for detailed components.
Stair Detail Drawing
Detail drawings provide construction information at large scale:
- Plan details: Show length of flight, tread depth, number of steps, stringer thickness, handrail position.
- Section details: Show handrail, balusters, risers, newel posts with dimensions.
- Component details: Enlarge specific areas like tread-riser connection, baluster-tread connection, and newel post details.
Concrete stairs are made by casting concrete in formwork. They must be designed to carry their own weight plus the intended user load. The structural engineer specifies concrete grade and reinforcement requirements.
A ramp is an inclined platform used for movement between levels as an alternative to stairs. It is particularly important for wheelchair accessibility.
Ramp Design Requirements
The gradient is expressed as a ratio of rise to horizontal length. Key factors include:
- Gradient: Must be gentle enough for safe use (see Table 3.2 from textbook)
- Width: Depends on expected usage
- Landings: Required at regular intervals
- Handrails: Needed on both sides for safety
| Maximum Going | Maximum Gradient | Maximum Rise |
|---|---|---|
| 10 m | 1:20 | 500 mm |
| 5 m | 1:15 | 333 mm |
| 2 m | 1:12 | 166 mm |
For example, a ramp with 1:15 gradient and 333 mm rise has a horizontal length of 15 × 333 = 4995 mm (approximately 5 m).
In Tanzania, knowledge of stairs construction is essential for local builders and artisans. When constructing a two-storey house in Dar es Salaam or any other region, a homeowner or builder must determine the correct number of risers and treads to ensure safety and comfort. For instance, if a building has a floor height of 3300 mm and uses a standard riser of 150 mm, the builder will calculate 22 risers and 21 treads, ensuring the staircase fits within the available space while meeting the required headroom of 2000 mm. This practical application helps create safe and functional vertical circulation in residential and commercial buildings across Tanzania.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Explain parts of stairs
- Explain various types of stairs
- Describe tools used in the construction of stairs
- Describe how to set out a stair
- Describe the construction of stairs
- Describe cleaning and storage of tools
Tathmini ya matokeo
Stairs built as per required standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain techniques and methods involved in constructing stairs
Principles: The student should explain the principles of
- Setting out a stair
- Constructing a stair
- Application of finishes to stairs
Theories: The student should explain:
- Types of stairs
- Materials used in stairs construction
- Uses of different types of stairs
- Stair construction techniques
- Storage of tools
- Environmental issues. Circumstantial Detailed knowledge about:
- Safety in stair construction
- Environmental issues
Swali
What is the term for the part of the tread that extends beyond the riser, providing extra foot space?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado