Mada za sehemu hiiPreparing building structural detailed drawingsMada 9
Structural stair detail drawings translate the engineer's design into precise instructions for constructing a safe and durable staircase. These drawings specify the exact dimensions of steps, the thickness of the concrete slab (waist slab), the arrangement of steel reinforcement, and how the stair connects to the supporting structure.
What is a Structural Stair Drawing?
A structural stair drawing is a detailed engineering drawing prepared before construction begins. It shows how the stair will be built, focusing on the load-bearing elements (like the waist slab and reinforcement) rather than just the aesthetic layout. These drawings are essential for Reinforced Cement Concrete (RCC) stairs to ensure they can safely carry the loads imposed on them.
Information Included on Stair Drawings
A complete structural stair drawing must contain the following details:
-
Overall Dimensions:
- Total Rise: The vertical height from the bottom floor to the top floor.
- Total Going: The horizontal length of the flight.
- Riser Height (h): The vertical height of each step.
- Tread Width (T): The horizontal depth of the step.
- Stair Width: The clear width available for walking.
- Waist Slab Thickness: The thickness of the inclined concrete slab that forms the stair.
- Landing Dimensions: The size and thickness of the flat platforms at the top and bottom.
-
Reinforcement Details (for RCC Stairs):
- Main Bars (Longitudinal): Steel bars placed along the slope of the waist slab (usually at the bottom) to resist bending.
- Distribution Bars (Transverse): Steel bars placed across the width (usually at the top) to distribute loads and hold the main bars in position.
- Bar Details: Diameter (e.g., Y12), spacing (e.g., @ 200mm), and laps/anchorage lengths.
-
Views and Sections:
- Plan View: Top-down view showing the outline of flights and landings.
- Longitudinal Section: A side view cut through the length of the stair, showing the slope, number of steps, and landing levels.
- Cross-Section: A side view cut across the width, showing the waist slab thickness and reinforcement arrangement.
-
Connections: Details on how the stair connects to beams, slabs, or landings at the top and bottom.
Procedure for Drawing Stair Details
Follow these steps to create a structural stair drawing using CAD software:
-
Identify the Type: Determine the stair configuration (e.g., straight flight, dog-legged) and the support method (e.g., waist slab, waist beam). This information comes from the architectural or structural plan.
-
Note Dimensions: Gather all necessary measurements from the design specifications:
- Total Rise and Going.
- Number of Risers and Treads (calculate h and T).
- Stair width and Waist slab thickness.
- Landing size and levels.
-
Draw the Plan View: Start by drawing the outline of the flights and landings. Show the wall boundaries and the centreline of the stair.
-
Draw the Longitudinal Section: This is the most important view. Draw a line representing the slope of the waist slab. Draw the steps (risers and treads) along this slope. Indicate the landing slabs at the correct levels.
-
Draw Cross-Sections: Add sections across the width to show the waist slab thickness and how the reinforcement is placed (e.g., main bars at the bottom, distribution bars at the top).
-
Indicate Reinforcement:
- In the longitudinal section, show the main bars running parallel to the slope.
- In the cross-section, show the distribution bars running across the width.
- Clearly label the bar diameter, spacing, and quantity (e.g., "Y12 @ 200mm c/c").
-
Label and Add Notes: Label all components (Riser, Tread, Waist Slab, Landing). Add notes specifying the concrete grade (e.g., Grade 25), steel type, and concrete cover required.
-
Final Review: Check all dimensions, ensure reinforcement details are consistent in all views, and verify that the drawing follows standard draughting conventions.
Worked Example: Drawing a Straight Flight RCC Stair
Let us apply the procedure to draw a simple straight flight RCC stair with the following specifications:
- Total Rise: 3000 mm
- Total Going: 3600 mm
- Number of Risers: 15 (Height = 200 mm each)
- Number of Treads: 14 (Width = 250 mm each)
- Stair Width: 1500 mm
- Waist Slab Thickness: 150 mm
- Reinforcement: Main bars Y12 @ 200mm; Distribution bars Y10 @ 250mm
- Support: Rests on landing beams at top and bottom.
Step 1: The Plan View
- Draw a rectangle representing the flight (3600 mm x 1500 mm).
- Draw the landing rectangles at the top and bottom.
- Indicate the direction of the "Going" (3600 mm).
Step 2: The Longitudinal Section
- Draw the ground floor line and the first-floor line (3000 mm apart).
- Draw the waist slab line at a slope.
- Along the slope, draw 15 vertical risers (200 mm) and 14 treads (250 mm).
- Add the landing slab at the top and bottom (e.g., 150 mm thick).
Step 3: Adding Reinforcement
- In the longitudinal section, draw a line parallel to the bottom of the waist slab to represent the main reinforcement. Label it: Main Bars: 2Y12-01-200 (meaning 2 bars of 12mm diameter, mark 01, spaced at 200mm).
- In the cross-section (drawn through the waist slab), draw small circles across the width to represent the distribution bars. Label them: Dist. Bars: Y10-02-250.
Step 4: Labels and Notes
- Label the Riser (h=200) and Tread (T=250).
- Add a general note: "Concrete Grade 25, Cover 25mm."
This structured approach ensures that every element required for construction is clearly represented on the drawing.
Real-life application
In Tanzania, when a contractor in cities like Mwanza or Dodoma builds a multi-storey shop or a school, they must follow structural stair drawings to construct the staircase safely. For example, a miscalculated waist slab thickness or incorrect reinforcement spacing in a stair leading to a marketplace could lead to the stair cracking under heavy foot traffic, endangering the lives of shoppers and requiring expensive repairs in Tanzanian shillings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Read the floor plan
- Prepare the working space
- Prepare the stair layout
- Locate the reinforcement bars in the staircase
- Indicate dimensions
- Mark the cutting lines for stair detail preparations
- Specify the reinforcement specifications and codes
- Save the drawing and shut down the computer
Tathmini ya matokeo
A complete set of stair structural drawings with specifications, is prepared as per construction standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain the methods of preparing stair detail drawings
Principles: The student should explain the principles involved in:
- Preparing stair detail drawings
Theories: The student should explain:
- Information shown on stair detail drawings
- Formulating stair detail drawings
- Technical requirements of structural drawings Detailed knowledge about:
- Proper handling of computer
- Printing of drawings
- Storage of drawings (both digital and physical storage)
Swali
What is the primary focus of a structural stair drawing in RCC stairs?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado