Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting equipment and materials
- Handling different types of fire
Handling Different Types of Fire
Fire is a serious hazard in any workshop or workplace. Understanding how fires start, knowing the different classes of fire, and learning how to extinguish them are essential skills for every craftsperson. In Tanzania, fire accidents in workshops can cause injuries, damage equipment, and lead to economic loss. This note will help you identify fire hazards, understand fire classes, and use fire extinguishers correctly.
Fires in workshops do not start by themselves. They result from specific causes that can be prevented. The main causes of fire include:
-
Careless smoking or matches — Disposing of burning cigarettes improperly or smoking near places where flammable substances are stored can start a fire.
-
Sparks from machinery — Sparks may be produced when metal parts rub together, from grinding wheels, or from broken bearings. These sparks can ignite nearby combustible materials.
-
Welding operations — The flame from welding equipment may come into contact with combustible materials. Always keep welding areas clear of flammable substances.
-
Electrical causes — Defective electric circuits, expired cables, loose contacts, or faulty electrical fittings can produce sparks that cause fires.
Fires are classified according to the type of material that is burning. Knowing the class of fire helps you choose the right extinguisher. There are six classes of fire:
Class A Fire — Ordinary Combustible Materials
These fires involve ordinary flammable materials such as wood, paper, fabric, coal, leather, sugar, rubber, and some plastics. This is the most common type of fire in carpentry workshops where wood and timber are stored.
Class B Fire — Flammable Liquids
These fires involve petroleum products and other flammable liquids such as petrol, kerosene, alcohol, oil, paint thinners, and grease. In a metal works section, you may encounter these liquids for cleaning or lubrication.
Class C Fire — Flammable Gases
These fires involve gases such as LPG (cooking gas), butane, acetylene (used in welding), hydrogen, natural gas, and methane. Acetylene cylinders used in welding workshops present this fire hazard.
Class D Fire — Combustible Metals
These fires involve burning metals such as potassium, sodium, lithium, aluminum, magnesium, and other metal powders. This class of fire may occur in laboratories or industries that use these materials. These fires burn at very high temperatures and may react violently with water.
Class E Fire — Electrical Hazards
These fires involve live electrical equipment such as computers, switchboards, power tools, and electrical wiring. As long as the equipment is connected to electricity, it is considered a Class E fire. Once the electricity is disconnected, the fire takes the class of the fuel that is burning.
Class F Fire — Cooking Oil or Fat
These fires involve cooking oils, greases, and fats. They commonly occur in kitchen areas or places where food is prepared. The oil becomes superheated and can reignite easily if water is added.
Using the wrong extinguisher on a fire can make the situation worse. The following table shows which extinguishers to use for each class of fire:
| Fire Class | Suitable Extinguisher |
|---|---|
| Class A | Water extinguisher |
| Class B | Foam extinguisher, dry powder extinguisher |
| Class C | Dry powder extinguisher, CO₂ extinguisher |
| Class D | Special dry powder extinguishers (for specific metals) |
| Class E | CO₂ extinguisher, dry powder extinguisher |
| Class F | Vaporizing liquid (wet chemical) extinguisher |
Important: Never use water on electrical fires (Class E) or flammable liquid fires (Class B), as water can spread the fire or cause electrical shock. Never use water on Class D metal fires, as they may react violently.
When using a fire extinguisher, remember the acronym PASS:
-
Pull the pin — This allows you to operate the extinguisher.
-
Aim at the base of the fire — Direct the nozzle at the base of the flames where the fuel is burning.
-
Squeeze the handle — This releases the extinguishing agent. Hold the extinguisher firmly.
-
Sweep from side to side — Move the nozzle slowly across the base of the fire until it is completely extinguished.
Additional tips:
- Stand at a safe distance from the fire, then move forward as the fire diminishes.
- Keep an eye on the area after extinguishing the fire in case it re-ignites.
- If the fire is too large or beyond your capabilities, evacuate immediately and call the fire department.
Scenario: In a carpentry workshop at Mwanza, a fire starts in a corner where sawdust has been stored near an electric switchboard. The electrician is called to investigate.
Answer: This is a Class A fire (ordinary combustible material — sawdust) and also involves electrical equipment, so it has elements of Class E initially. The correct extinguisher to use is a dry powder extinguisher or a CO₂ extinguisher. If only a water extinguisher is available, the electricity must be switched off first before using it, because water conducts electricity and can cause electric shock. Using the PASS method, you would pull the pin, aim at the base of the fire, squeeze the handle, and sweep from side to side until the fire is out.
- Keep the workshop clean and free of sawdust, oil spills, and flammable materials.
- Store flammable liquids in proper containers away from heat sources.
- Check electrical equipment regularly for faults.
- Know the location of fire extinguishers and how to use them.
- Never smoke inside the workshop.
- Report any fire hazard immediately to your supervisor.
In Tanzania, a carpentry workshop in Arusha storing timber, varnish, and gas cylinders for welding must have the correct fire extinguishers placed near each hazard area. If a fire starts from a varnish spill, the worker should identify it as Class B and use a foam extinguisher, not water. Knowing fire classes helps prevent using the wrong extinguisher, which could spread the fire and cause more damage worth millions of Tanzanian shillings in lost materials and equipment.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment, and safety gears
- Identify common classes of fire
- Use first aid kit
- Respond correctly and safely when faced with different types of fire
- Apply right class of fire extinguisher
- Handle different types of fire
- Apply right class of firefighting materials
- Check and test fire extinguishers
- Clean up tools, equipment and working place
- Store tools, equipment and safety gears
Tathmini ya matokeo
Fire accidents handled as per rules and regulations
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should be able to explain methods related to handle different types of fire
Principles: The student should explain principles related to handle different types of fire
Theories: The students should explain theories related to handle different types of fire
Circumstantial knowledge: The students should explain detailed knowledge related to handle different types of fire
Swali
What does the acronym PASS stand for when using a fire extinguisher?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado