Mada za sehemu hiiMaking sofaMada 2
- Making single sofa (English or club type)
- Making multifunctional sofa
Making a Single English Sofa
A single English sofa is a comfortable seating furniture piece designed for one person, featuring a hardwood frame, cushioning, and upholstery fabric. It combines traditional English design elements with functionality, providing a compact and elegant seating option for living rooms, studies, or reading corners.
Understanding standard dimensions ensures the sofa is comfortable and proportional. The following measurements are based on British standards:
| Feature | Measurement (cm) |
|---|---|
| Width (arm to arm) | 75–95 |
| Depth | 85–100 |
| Back height | 70–90 |
| Seat height | 40–50 |
| Arm height | 55–65 |
| Seat width | 60–75 |
These dimensions provide adequate space for individual comfort while maintaining the classic English sofa proportions.
The following materials are needed to construct a single English sofa:
- Hardwood: Oak or beech for the frame (provides strength and durability)
- Webbing: Jute or elastic webbing for seat support
- Springs: 8-way hand-tied springs or sinuous springs
- Foam: High-density foam (5 cm base layer) and soft top layer
- Dacron wrap: For smooth cushion curves
- Upholstery fabric: Tweed, wool, linen, or cotton
- Wood glue: For joinery
- Trim: Decorative nails or braid trim
- Legs: Tapered wooden legs (approximately 15 cm)
The following tools and safety gear are required:
- Measuring tape
- Type square
- Claw hammer
- Hand saws
- Pincers
- Heavy-duty staple machine
- Cross pein hammer
- Circular saw (for wood cutting)
- Air stapler (for fabric attachment)
- Rubber mallet
- Sandpaper
- Pencil
- Safety equipment: Overall, safety boots, mask, safety glasses
Step 1: Prepare and Cut the Frame
Cut the hardwood pieces according to the following dimensions:
- Arms: Two pieces at 60 cm height each
- Seat base: One piece at 75 cm × 90 cm
- Backrest: One piece at 45 cm × 90 cm
Assemble the frame using mortise-and-tenon joints and wood glue. This joint provides strong structural connections. The mortise is a hole cut into one piece, and the tenon is a projection from the other piece that fits into it.
Step 2: Install Seat Support System
Stretch webbing diagonally across the seat base. Secure the webbing tightly to prevent sagging. Install either:
- An 8-way hand-tied spring system (traditional method), or
- Sinuous springs (modern alternative)
The springs should be evenly spaced to provide uniform support across the seat.
Step 3: Apply Cushioning
Apply cushioning layers in the following order:
- Layer 1: Place high-density foam (5 cm thickness) on the seat and backrest
- Layer 2: Add Dacron wrap over the foam for smooth curves
- Secure layers: Use spray adhesive to hold the cushioning in place
The high-density foam provides firm support, while the Dacron wrap creates a smooth, rounded appearance before the fabric is added.
Step 4: Upholster the Sofa
Follow these steps to apply upholstery fabric:
- Drape the fabric over the cushioning, ensuring it is smooth without wrinkles
- Start stapling from the centre of each side, working outward
- Staple corners last, pulling fabric taut to avoid bulges
- Trim excess fabric with scissors
- Ensure consistent tension across all surfaces
The correct stapling sequence is: centre → sides → corners. This sequence prevents wrinkles and ensures even tension.
Step 5: Add Finishing Touches
- Attach decorative nail head trim or braid trim along the edges
- Install tapered wooden legs (approximately 15 cm long)
- Sand and apply wood finish if the frame is exposed
When making a sofa, always observe the following safety practices:
- Wear appropriate PPE: overall, safety boots, mask, and safety glasses
- Use sharp tools carefully to avoid injuries
- Secure workpiece properly before cutting or stapling
- Keep the workspace clean and organized
- Disconnect power tools when changing accessories
A student needs to make a single English sofa with the following dimensions:
- Seat width: 75 cm
- Seat depth: 90 cm
- Back height: 75 cm
- Arm height: 60 cm
Calculation for foam cushioning:
- Seat cushion area = 75 cm × 90 cm = 6,750 cm²
- Back cushion area = 75 cm × 75 cm = 5,625 cm²
- Total cushion area = 6,750 + 5,625 = 12,375 cm²
Using 5 cm thick foam, the volume required is: Volume = 12,375 cm² × 5 cm = 61,875 cm³ (approximately 0.062 m³)
In Tanzania, a single English sofa can be made by local carpenters for sale in markets such as Kariakoo in Dar es Salaam or along the road in Arusha. A custom-made sofa might cost between TZS 150,000 to TZS 400,000 depending on the materials used, providing income-generating opportunities for skilled craftsmen while offering affordable furniture options for households.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Draw/sketch sofa
- Interpret drawings
- Calculate materials required
- Select tools and materials
- Prepare sofa members
- Set out members
- Make joint
- Assemble sofa frame
- Fix mattress cushion
- Fix framing
- Fix sofa cover
- Clean workplace and tools
- Store tools and sofa to a safe place
Tathmini ya matokeo
Constructed sofa conforms to drawing and technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should describe different methods for making sofa
Principles: The student should state principles related to making sofa
Theories: The students should state procedures for making sofa, required tools and materials, and different types of sofas
Circumstantial knowledge: Workshop safety rules and regulations
Swali
What is the standard seat height range for a single English sofa according to the textbook?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado