Mada za sehemu hiiConstructing timber floorsMada 3
- Constructing single floor
- Constructing double floor
- Constructing triple floor
Constructing Double Floor
A double floor is a timber floor construction that uses two layers of flooring material to create a sturdy and level surface. The lower layer (sub-floor) provides structural support, while the upper layer (finishing floor) offers a smooth, wear-resistant surface. This construction method is commonly used in Tanzanian buildings to create durable floors over bearers and joists.
Double floors serve several important functions in building construction:
- Insulation: The air space between the two floor layers provides thermal and sound insulation
- Level surface: It corrects uneven surfaces and provides a flat finish
- Durability: Two layers of material distribute loads more effectively, increasing the floor's lifespan
- Prevention of dampness: The raised construction allows air circulation, reducing moisture problems
A double floor consists of the following main components:
- Bearers: Large horizontal timber members that rest on the foundation or walls and support the joists
- Joists: Smaller timber members placed across the bearers to support the flooring
- Sub-floor boards: The lower layer of boards fixed to the joists
- Finishing floor boards: The top layer that provides the walking surface
Step 1: Preparation and Layout
Before starting construction, ensure all materials and tools are ready. Measure the room dimensions accurately using a measuring tape. Mark the positions of bearers and joists according to the floor plan. The spacing between joists typically ranges from 400mm to 600mm depending on the timber size and expected load.
Step 2: Installing Bearers
Place the bearers on the supporting walls or foundations. Ensure they are level and properly aligned. Bearers should be treated with preservative to protect against rot and insect attack. Secure the bearers firmly to prevent movement.
Step 3: Fixing Joists
Cut the joists to the required length using a tenon saw or hand saw. Space the joists evenly across the bearers, typically at 450mm centres for general domestic use. Fix the joists to the bearers using appropriate fixings such as nails or brackets. Use a spirit level to check that all joists are level.
Step 4: Laying the Sub-floor
Fix the sub-floor boards (usually thinner boards, around 19mm thick) to the joists. The boards can be laid horizontally or diagonally for additional strength. Leave a small gap (about 2mm) between boards to allow for expansion. Use a claw hammer and nails to secure the boards firmly.
Step 5: Laying the Finishing Floor
Place the finishing floor boards (typically 25mm thick) on top of the sub-floor. These boards are often of better quality and may be tongue-and-groove type for a tighter joint. Nail through the finishing boards into the joists below. For tongue-and-groove boards, nail at an angle through the tongue to hide the nail heads.
Step 6: Finishing
Sand the surface level using a portable sander. Apply appropriate finish such as varnish, paint, or sealant to protect the floor and improve its appearance.
A carpenter needs to install joists for a room measuring 3.6 metres wide. If the joists are to be spaced at 450mm centres, how many joists are required?
Solution:
First, convert the room width to millimetres: 3.6m = 3600mm
Number of spaces = 3600 ÷ 450 = 8 spaces
Number of joists = Number of spaces + 1 = 8 + 1 = 9 joists
Therefore, the carpenter needs 9 joists to cover the 3.6m width at 450mm spacing.
When constructing a double floor, always observe the following safety measures:
- Wear safety boots to protect feet from falling objects
- Use safety glasses when cutting or sanding timber
- Wear a dust mask when sanding or working with treated timber
- Use clamps to secure timber while cutting or fixing
- Keep work area clean and free of debris
- Handle chisels carefully and cut away from the body
- Inadequate spacing: Joists placed too far apart will sag under load
- Poor nailing: Nails driven at the wrong angle may split the timber
- No expansion gaps: Boards fitted tightly without gaps may buckle when they expand
- Untreated timber: Using untreated timber in contact with moisture leads to rot
- Unlevel joists: Failure to check levels results in an uneven finished floor
In Tanzania, constructing a double floor is a valuable skill for carpenters working on residential buildings in areas like Arusha, Dodoma, and Mwanza. A local carpenter might be hired to build a double floor for a village storehouse, where the air space between layers helps keep the floor dry and prevents stored maize or beans from being damaged by rising damp. The durability of a well-constructed double floor also makes it ideal for high-traffic areas in schools and health centres across the country.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret working drawings
- Calculate materials required
- Select tools
- Prepare members
- Prepare floor surface
- Set out members
- Make joints
- Assemble timber floor members
- Apply finishes
- Clean the work area
- Store tools and equipment in a safe place
Tathmini ya matokeo
Double timber floor conforms to technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should be able to identify tools to be used and state procedures of constructing double timber floor
Principles: The student should be able to explain principles related to construction of double timber floor
Theories: The students should be able to explain important aspects to consider when constructing double timber floor
Circumstantial knowledge: Workshop safety
Swali
Which of the following is a main component of a double floor construction?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado