Mada za sehemu hiiPerforming finishing workMada 3
- Painting wood surfaces
- Varnishing wood surfaces
- Spraying wood surfaces
Spraying Wood Surfaces
Spraying is a fast and effective method of applying paint, varnish, or other finishes to wood surfaces. The finish is atomized (broken up) into tiny droplets and sprayed onto the surface using air pressure, producing a smooth, nearly flawless film.
Spraying offers several advantages over brushing:
- It is the fastest way to apply finish
- Produces a flat, even coating
- Can cover large areas quickly
- Reaches into corners and detailed areas easily
- Creates a smoother finish than brushing
There are three main categories of spraying:
- Air spraying — uses compressed air to atomize the finish (most common for wood furniture)
- Airless spraying — uses high pressure to push finish through a small opening
- Aerosol spraying — uses pressurized cans (like spray paint)
For Form 1 carpentry work, we focus on air spraying.
Before spraying, gather these tools and equipment:
- Air compressor — supplies pressurized air
- Valve — controls air pressure
- Air hose — usually 10mm in size
- Spray gun — atomizes the coating material
- Container — holds the liquid finish (cup attached to gun or separate pot)
Bleeder Guns
- Do not have a valve to shut off airflow
- Trigger controls only the flow of liquid
- Air flows continuously from the compressor
Non-bleeder Guns
- Allow separate control of air and liquid flow rates
- Have separate fluid and air (pattern spreader) controls
- More versatile and commonly used
Proper adjustment ensures even spray and quality finish. Follow these steps:
- Connect the airline from compressor to air transformer, then to the gun
- Turn the nozzle to create horizontal or vertical spraying pattern
- Fill the cup and attach it to the gun
- Set air pressure at the gun to 40 PSI (check at the air transformer)
- Turn the fluid needle valve adjusting screw to stop all fluid flow
- Pull the trigger while opening the fluid needle valve gradually
- Spray across a test panel about 150–200mm (6–8 inches) from the surface
- Inspect the spray pattern — it should show even distribution across the full width
When actually spraying a wood surface, follow this sequence:
| Step | Action |
|---|---|
| 1 | Select materials as instructed (sandpaper, sanding blocks, finish) |
| 2 | Select spray gun and air compressor |
| 3 | Hold the gun 150–200mm (6–8 inches) from the surface |
| 4 | Aim the gun off to the side of the product first |
| 5 | Move the gun in a straight motion and squeeze the trigger before reaching the product |
| 6 | Spray an even film across the surface with each pass |
| 7 | Release the trigger after passing the product's edge |
| 8 | Spray the entire surface, overlapping the wet edge by about 50% |
| 9 | Move the gun in one direction during each pass (changing direction causes runs) |
| 10 | Apply the second coat at 90 degrees to the first series of passes |
| 11 | Clean the spray gun, working place, and return tools to store |
- Always maintain the correct distance (150–200mm) from the surface
- Keep the gun moving at a constant speed
- Overlap each pass by about 50% to avoid gaps
- Apply thin, even coats rather than one thick coat
- Allow each coat to dry before applying the next
- Sand lightly between coats with fine sandpaper
- Work in a well-ventilated area to avoid inhaling spray mist
- Wear a mask or respirator when spraying
- Keep spray equipment away from open flames (many finishes are flammable)
- Wear safety goggles to protect eyes
- Ensure the spray booth or area is free from dust and debris
In Tanzania, carpentry graduates often start small businesses making and refinishing furniture for local markets. If a furniture maker in Mwanza or Dar es Salaam receives an order to refinish office chairs with varnish, knowing how to spray rather than brush the finish saves time and produces a more professional look. This skill allows the craftsperson to complete jobs faster, take more orders, and earn more income — a spray-finished chair can be completed in less than half the time compared to brushing, meaning more money earned per day.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and materials for spraying
- Prepare the wood surface for spraying
- Set up and adjust spray equipment
- Apply spray finish evenly across the surface
- Observe safety precautions
- Clean tools and equipment
- Store tools and equipment in a designated storage area
Tathmini ya matokeo
Sprayed wood surfaces conform to technical specifications.
Tathmini ya maarifa
Underpinning knowledge of
Methods used: The student should explain methods related to spraying wood surfaces
Principles: The student should state the principles of spraying wood surfaces
Theories: The student should explain theories related to spraying wood surfaces
Circumstantial knowledge: The student should explain detailed knowledge related to spraying wood surfaces
Swali
What is the main advantage of spraying wood surfaces compared to brushing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado