Mada za sehemu hiiHandling fire accidentsMada 3
- Performing fire classification
- Performing firefighting
- Performing fire protection
Performing Firefighting
Firefighting is the process of extinguishing fires to prevent injury, death, and property damage. In an electrical workshop, understanding how to respond to fire accidents is critical because electrical equipment can easily catch fire and pose additional dangers such as electric shock. This topic teaches you the basic methods of firefighting, the types of fire extinguishers, and the steps to take when a fire occurs.
Firefighting refers to the actions taken to control and extinguish fires. It involves using the right equipment, following safety procedures, and evacuated people from danger. In a workplace setting like an electrical workshop, firefighting also means knowing how to use firefighting equipment safely without putting yourself or others at risk.

Fire requires three elements to burn: heat, fuel, and oxygen. This is called the fire triangle. To extinguish a fire, you must remove at least one of these elements. The main methods of firefighting are:
- Cooling: Removing heat by applying water or other cooling agents
- Starving: Removing fuel by shutting off gas or electricity supply
- Smothering: Cutting off oxygen by covering the fire with a blanket, sand, or using chemical extinguishers
Fires are classified according to the type of material that is burning. Using the wrong type of extinguisher can make the fire worse.
| Class | Type of Fire | Recommended Extinguisher |
|---|---|---|
| Class A | Ordinary materials like wood, paper, cloth | Water extinguisher |
| Class B | Liquids like petrol, oil, grease | Foam or CO₂ extinguisher |
| Class C | Gases like propane, butane | Dry powder extinguisher |
| Class D | Metals like magnesium, sodium | Special dry powder |
| Class E | Electrical fires | CO₂ or dry powder extinguisher |
In an electrical workshop, Class E fires are the most common. Never use water on electrical fires because water conducts electricity and can cause shock.
When a fire breaks out in the workshop, follow these steps:
- Stay calm and alert others by shouting "Fire!"
- Activate the fire alarm if available
- Switch off the main electrical supply if it is safe to do so
- Use the appropriate fire extinguisher for the type of fire
- Evacuate the area using the nearest exit
- Close doors and windows behind you to slow the spread of fire
- Assemble at the designated meeting point
- Call the fire brigade (dial 114) or inform the responsible person
The PASS method helps you remember how to use a fire extinguisher correctly:
- Pull the pin from the handle
- Aim the nozzle at the base of the fire
- Squeeze the handle to release the extinguishing agent
- Sweep the nozzle from side to side at the base of the fire
The following equipment should be available in an electrical workshop:
- Fire extinguishers (CO₂, dry powder, foam)
- Fire blankets
- Sand buckets
- Fire hoses
- Smoke detectors
- Emergency exit signs
- First aid box
- Always wear appropriate PPE such as gloves, helmets, safety glasses, and masks
- Never use water on electrical fires
- Stand at a safe distance from the fire
- Keep your back to the exit so you can escape quickly
- Do not inhale smoke; cover your nose and mouth
- If the fire is too large, evacuate immediately and let the professionals handle it
- What is the fire triangle?
- Which class of fire is most common in an electrical workshop?
- Describe the PASS method of using a fire extinguisher.
- Why should you never use water on an electrical fire?
- List five firefighting equipment found in a workshop.
In Tanzania, electrical fires commonly occur in markets, workshops, and homes due to faulty wiring or overloaded sockets. For example, if a small shop in Kariakoo experiences smoke from a overloaded extension box, the shopkeeper who has learned firefighting skills can quickly disconnect the power using the main switch, use a CO₂ extinguisher to put out the Class E fire, and safely evacuate customers — preventing a small incident from becoming a major disaster that could destroy goods worth millions of Tanzanian shillings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment, and safety gear.
- Classify fire extinguishers.
- Apply the right class of firefighting materials.
- Check and test fire extinguishers.
- Observe safety precautions.
- Clean tools, equipment, safety gear, and workplace.
- Store tools, equipment, and materials.
Tathmini ya matokeo
Firefighting equipment is applied as per rules and regulations.
Tathmini ya maarifa
Knowledge evidence:
Methods used: The student should explain how to perform firefighting.
Principles: The student should explain principles related to firefighting.
Theories: The student should explain:
- Causes of fires,
- Fire triangle.
Detailed knowledge about:
- Safety precautions while handling fire accidents.
- Awareness of OSHA rules and regulations. Properties of materials and chemicals
Swali
What is the primary purpose of an emergency stop button in a workshop?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado