Mada za sehemu hiiHandling fire accidentsMada 3
- Performing fire classification
- Performing firefighting
- Performing fire protection
Fire protection involves the measures and practices taken to prevent fires from starting and to control or extinguish fires if they do occur. In an electrical workshop or workplace, where electricity and heat-producing tools are constantly used, fire protection is essential for protecting lives, equipment, and property.
Fire requires three elements to ignite, known as the fire triangle:
- Fuel – any combustible material such as wood, paper, cloth, or flammable liquids
- Heat – a source of ignition like sparks, hot surfaces, or open flames
- Oxygen – air that supports combustion
If any one of these three elements is removed, fire cannot start or will be extinguished. This principle is the foundation of all fire protection methods.

1. Fire Prevention
Prevention is the most effective method of fire protection. Key prevention measures include:
- Keeping the workshop clean and free from combustible waste
- Storing flammable materials in designated safe areas
- Regular inspection of electrical wiring and equipment for faults
- Proper handling and storage of flammable liquids
- Prohibiting smoking, eating, and drinking in work areas
- Ensuring good ventilation to prevent heat buildup
- Turning off power supplies when equipment is not in use
2. Fire Detection
Early detection saves lives and property. Detection methods include:
- Installing smoke detectors and fire alarms
- Regular inspection of electrical systems for overheating or sparks
- Training workers to recognize early signs of fire, such as unusual smells or smoke
3. Fire Extinguishment
If a fire starts, having the right firefighting equipment and knowing how to use it is critical.
Different types of fires require different extinguishers. The common classes are:
| Class | Type of Fire | Suitable Extinguisher |
|---|---|---|
| Class A | Ordinary combustibles (wood, paper, cloth) | Water, foam |
| Class B | Flammable liquids (oil, petrol, grease) | Foam, dry powder, CO₂ |
| Class C | Electrical equipment fires | Dry powder, CO₂ |
| Class D | Metal fires | Special dry powder |
For electrical installations, CO₂ (carbon dioxide) extinguishers and dry powder extinguishers are most commonly used because they do not conduct electricity.
Remember the PASS acronym:
- Pull the pin – Break the tamper seal
- Aim the nozzle at the base of the fire
- Squeeze the handle slowly and evenly
- Sweep the nozzle from side to side at the base of the fire
Worked Example
Suppose a student notices a small electrical fire starting from a damaged extension cord in the workshop. The correct response using the PASS method would be:
- First, alert others and activate the fire alarm
- Then, select an appropriate extinguisher (Class C or dry powder)
- Pull the pin from the extinguisher
- Aim the nozzle at the base of the flames, not at the top
- Squeeze the handle firmly while sweeping horizontally across the base of the fire until extinguished
- After the fire is out, disconnect the power supply if safe to do so
When responding to a fire or performing fire protection duties, workers must wear appropriate PPE:
- Safety boots – protect feet from debris and hot surfaces
- Helmets – protect the head from falling objects
- Overalls – provide full-body protection
- Hand gloves – protect hands from heat and sharp objects
- Masks – protect against smoke inhalation
- Safety glasses – protect eyes from sparks and debris
- Know the location of fire extinguishers, fire alarms, and emergency exits
- Know how to operate the fire extinguisher before an emergency occurs
- Never overload electrical circuits or use damaged cords
- Keep flammable materials away from heat sources
- Report any electrical faults or damaged equipment immediately
- Never attempt to fight large fires – evacuate and call professionals
- Participate in fire drills and safety training
In case of a fire emergency:
- Raise the alarm immediately
- Evacuate the area using the nearest safe exit
- Close doors behind you to contain the fire
- Meet at the designated assembly point
- Call the fire service (phone 114 in Tanzania)
- Only attempt to extinguish small fires if trained and safe to do so
In Tanzania, electrical fires are common in markets and small workshops due to overloaded sockets and poor wiring. For example, a vendor at Mwenge Market in Dar es Salaam who has properly installed fire extinguishers, keeps flammable items away from heat sources, and knows how to use a CO₂ extinguisher can prevent a small electrical fault from destroying their entire stall and stock worth TZS 500,000 or more. Applying fire protection knowledge protects both the business and nearby shops from devastating losses.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Identify inflammable materials.
- Classify inflammable material.
- Apply housekeeping manners to avoid fire.
- Observe safety precautions.
Tathmini ya matokeo
Fire protection equipment is identified and applied as per rules and regulations.
Tathmini ya maarifa
Knowledge evidence:
Methods used: The student should explain how to perform fire protection.
Principles: The student should explain principles related to fire protection.
Theories: The student should explain types of burning materials.
Detailed knowledge about:
- Safety measures in handling waste disposal
- Awareness of OSHA rules and regulations
- Properties of materials and chemicals
Swali
What is the FIRST action you should take when you discover a fire in the workshop?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado