Mada za sehemu hiiPerforming forming operationsMada 4
- Performing metal cutting
- Performing metal shearing
- Performing metal bending
- Constructing sheet metal box
Performing Metal Shearing
Metal shearing is a forming operation that involves cutting sheet metal into desired shapes and sizes using specialized cutting tools. This process is essential in electrical installation work for preparing metal enclosures, mounting plates, and various electrical box components.

Metal shearing is the process of cutting sheet metal by applying force through two blades—a moving blade and a fixed blade—that slide past each other. The shearing action separates the material along a straight line. This operation is commonly used in workshop settings to prepare metal pieces for electrical installations such as switch boxes, conduit accessories, and trunking sections.
Guillotine Metal Shear
A guillotine metal shear is a machine used for cutting sheet metal. It consists of:
- Shear table
- Ram (moving blade)
- Holding clamps
- Gauges
- Fixed blade
The metal sheet is clamped on the table, and the ram descends with the moving blade across the fixed blade to shear the material cleanly.
Snip Shear Tool
Snip shear tools work like scissors. They have dual blades that press against each other to slice through thin sheet metals. This hand tool is used for:
- Short straight-line cuts
- Short curve-shaped cuts
- Trimming and finishing work
Maximum Sheet Thickness for Snips
| Material | Maximum Thickness (mm) |
|---|---|
| Steel | 0.7 |
| Brass | 0.8 |
| Copper | 1.0 |
| Aluminium | 1.0 – 2.5 |
Before performing any shearing operation, ensure you:
- Wear appropriate personal protective equipment (PPE) including safety glasses, leather gloves, overalls, and safety boots
- Check that the cutting blades are sharp and properly aligned
- Ensure the material is securely clamped before cutting
- Keep fingers away from the cutting path
- Use the correct tool for the material thickness
- Keep the work area clean and free of metal swarf
- Select the metal sheet – Choose the appropriate gauge and type of sheet metal for the task
- Perform marking out – Measure using a steel rule and mark the cutting line with a scriber
- Position the metal – Place the sheet on the shear table, aligning the marked line with the fixed blade
- Clamp the metal – Use the holding clamps to secure the sheet in position
- Operate the shear – Lower the moving blade smoothly to cut along the marked line
- Inspect the cut – Check that the cut edge is clean and meets the required dimensions
- Mark the cutting line – Use a steel rule and scriber to mark the required shape
- Select appropriate snips – Choose snips suitable for the material type and thickness
- Position the snips – Align the blades with the marked cutting line
- Cut along the line – Squeeze the handles firmly and rotate the snips to follow the marked contour
- Finish the cut – Complete the cutting motion ensuring a clean edge
- Deburr if necessary – Use a file to remove any burrs or sharp edges
A student is given a sheet of 22-gauge steel measuring 300 mm × 200 mm. They need to cut a rectangular piece measuring 100 mm × 80 mm for making a small junction box. The student should:
- Measure and mark 100 mm × 80 mm on the sheet using a steel rule and scriber
- Use snip shear for the shorter cuts or guillotine shear for longer straight edges
- Cut along the marked lines
- Check measurements with a vernier calliper
- File any rough edges
In Tanzania, metal shearing skills are applied when electricians prepare metal enclosures for circuit breakers and distribution boxes in homes and commercial buildings. For example, when wiring a new shop in Arusha, an electrician may need to cut galvanized steel sheets to size for making custom mounting panels or protective covers for electrical installations. This practical skill enables electricians to create properly fitted electrical housings that protect wiring connections and meet safety standards required by the Tanzania Electrical Installation Regulations.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret the drawing.
- Select the material, tools, and equipment.
- Mark the work piece.
- Clamp the work piece on a vice.
- Mark the start grooves with a triangle file.
- Perform metal shearing
- Remove sharp edges with a file.
- Take measurements for accuracy.
- Apply safety measures.
- Clean the workplace, work pieces, and tools
Tathmini ya matokeo
Metal shearing is performed as per technical specifications.
Tathmini ya maarifa
Methods used: The student should explain how to perform metal shearing
Principles: The student should explain principles related to performing metal shearing
Theories: The trainee should explain:
- Types of metal shearing tools and their functions.
- Main parts of a metal shearing machine.
Circumstantial knowledge:
Detailed knowledge about:
- Preventive maintenance of tools, equipment, and machines
- Properties of metal material
Swali
What is metal shearing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado