Mada za sehemu hiiPerforming forming operationsMada 4
- Performing metal cutting
- Performing metal shearing
- Performing metal bending
- Constructing sheet metal box
Performing Metal Cutting
Metal cutting is a fundamental forming operation in electrical installation work, used to cut metals to required sizes and shapes using hand tools or machines. This skill is essential for preparing metal components such as conduits, trunkings, and metallic boxes used in electrical wiring systems.

Metal cutting is the process of cutting metals to desired dimensions using hand-operated or machine tools. In electrical installation work, the most commonly used hand tool for metal cutting is the hacksaw. The choice of blade is important:
- High Speed Steel (HSS) blades are used for tough, resistant materials
- High Carbon Steel blades are used for general cutting purposes
The following tools and equipment are used in metal cutting operations:
Hand Tools
- Hacksaw – A hand-operated saw with a replaceable blade, used for cutting metal manually
- Snip shear tool – Hand tool resembling scissors, used for cutting thin sheet metals along straight or curved lines
Machine Tools
- Guillotine metal shear – A machine with a shear-table, ram, holding clamps, gauges, moving blade, and fixed blade, used for cutting sheet metal
Measuring and Marking Tools
- Steel rule
- Try square
- Vernier calliper
- Scriber
Personal Protective Equipment (PPE)
- Leather gloves
- Overalls
- Safety boots
- Safety glasses
Always observe the following safety precautions:
- Wear appropriate personal protective equipment (PPE): safety glasses, gloves, overalls, and safety boots
- Ensure the workpiece is securely clamped before cutting
- Keep fingers away from the cutting path
- Use the correct blade type for the material being cut
- Ensure the work area is clean and free from obstructions
- Check tools for damage before use
Using Guillotine Metal Shear
- Select the metal sheet to be cut
- Perform marking out – measure and mark the required dimensions using a steel rule and scriber
- Clamp the metal sheet securely with the guillotine ram
- Operate the machine by lowering the moving blade across the fixed blade to shear the metal
- Check the cut dimensions for accuracy
Using Snip Shear Tool
- Select the appropriate snip shear tool
- Mark the cutting line on the metal sheet using a scriber and steel rule
- Cut along the marked line by squeezing the handles
- Check the cut for accuracy
Maximum sheet thickness for snip shear:
| Material | Maximum Thickness |
|---|---|
| Steel | 0.7 mm |
| Brass | 0.8 mm |
| Copper | 1.0 mm |
| Aluminium | 1.0 – 2.5 mm |
A student is given a sheet metal and must:
- Take measurements as per given instructions
- Mark out the required dimensions using a steel rule and scriber
- Cut the sheet metal using a snip shear tool
- Ensure the cut dimensions match the specifications
Product Specifications:
- Measurement done as per given instructions
- Tools and equipment selected appropriately
- Sheet metal cut as per given specifications
- Work area kept clean and tidy
A student needs to cut a piece of aluminium sheet 200 mm long and 50 mm wide from a larger sheet. The steps are:
- Measure 200 mm along the edge of the sheet using a steel rule
- Mark the point with a scriber
- Measure 50 mm perpendicular to the first mark and mark again
- Draw the cutting lines using a try square to ensure right angles
- Secure the sheet in position (or hold firmly for snip shear)
- Cut along the marked lines using the appropriate tool
- Measure the finished piece to confirm dimensions are correct
- Metal cutting involves cutting metals to required sizes using hand tools (hacksaw, snips) or machines (guillotine shear)
- Always select the correct blade or tool for the material being cut
- Safety precautions must be observed at all times
- Accurate measuring and marking out is essential before cutting
In Tanzania, metal cutting skills are used by electrical contractors and technicians when installing wiring systems. For example, an electrician in Dar es Salaam cutting galvanized steel conduits to length using a hacksaw before installing them in a building's electrical distribution system. Similarly, sheet metal boxes used as junction boxes are cut to size using snip shear tools on construction sites across Tanzania.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret the drawing.
- Select the material, tools, and equipment.
- Mark the workpiece.
- Clamp the workpiece on a vice.
- Mark the start grooves with a triangle file.
- Perform metal cutting.
- Remove sharp edges with a file.
- Apply safety measures.
- Clean the workplace, work piece and tools.
Tathmini ya matokeo
Metal-cutting is performed as per technical specifications.
Tathmini ya maarifa
Methods used: The student should explain how to perform metal-cutting
Principles: The student should explain principles related to performing metalcutting
Theories: The trainee should explain:
- Types of metal cutting tools and their functions.
- Main parts of a metal cutting tool.
Circumstantial knowledge:
Detailed knowledge about:
- Preventive maintenance of tools, equipment and machines
- Properties of metal material
Swali
What is metal cutting?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado