Mada za sehemu hiiPerforming surface finishing operationsMada 3
- Carrying out sanding
- Carrying out filing
- Carrying out reaming

Filing is a process of removing burrs (rough edges) from a metal piece that has been cut by a hacksaw or power saw. This process smoothens the workpiece and prepares it for further finishing. The tool used in filing is called a file — a hardened steel bar with many small cutting edges on its surface.
By Cut (Type of Teeth)
Files are classified according to the arrangement of their cutting teeth:
1. Single-cut file
- Has a single row of teeth running in one direction at an angle of 60°
- Used for filing soft materials such as lead, tin, and aluminium
2. Double-cut file
- Has rows of teeth running in two directions crossing each other
- One row at 50° to 60°, another at 70°
- Used for filing hard materials such as bronze, steel, and brass
3. Rasp-cut file
- Has sharp, pointed teeth in a line
- Used for filing soft materials like wood and leather
- Available only in half-round shape
4. Curved-cut file
- Has deeper cutting action
- Used for filing soft materials like plastic, aluminium, tin, and copper
- Available only in flat shape
By Shape
Files come in various shapes for different purposes:
- Flat file — for general flat surfaces
- Round file — for rounding holes and curves
- Half-round file — for concave surfaces
- Triangular file — for triangular holes and corners
- Square file — for square holes
By Grade (Coarseness)
Files are also classified by their coarseness:
- Rough — for removing large amounts of material
- Medium — for general smoothing
- Fine — for final finishing
| Tool | Purpose |
|---|---|
| File | Main tool for smoothing metal |
| Bench vice | Holds the workpiece securely |
| File card | Cleans metal filings from file teeth |
| Chalk or oil | Reduces clogging of file teeth |
Follow these steps to file a metal piece correctly:
Step 1: Secure the Workpiece
- Clamp the workpiece securely in a bench vice
- Position the workpiece so it extends slightly beyond the jaws
- Ensure the workpiece is held firmly to prevent movement during filing
Step 2: Adopt Correct Body Position
- Stand with feet about 60 cm apart
- Place your left foot ahead of your right foot
- Your arms and shoulders should be able to swing freely
Step 3: File in One Direction Only
- Apply pressure on the forward stroke only
- Lift the file away from the workpiece on the return stroke
- Do not use a back-and-forth motion, as this damages both the file and workpiece
Step 4: Clean the File Regularly
- Use a file card or stiff wire brush to remove metal pins (small pieces of filed metal) stuck in the teeth
- Clean the file every 15 strokes to prevent pinning
- A pinned file becomes ineffective
Step 5: Apply Lubricant
- Rub chalk or a small amount of oil into the file teeth
- This prevents the file from clogging
- It also reduces metal dust and protects the file
Step 6: Check Measurements
- Verify the dimensions of your workpiece against the required specifications
- Use appropriate measuring tools such as a steel ruler
Step 7: Clean the Workpiece and Workplace
- Remove all metal filings and debris
- Clean the workpiece and your work area
- Always wear safety glasses to protect eyes from metal particles
- Secure the workpiece firmly in the vice before filing
- Use the correct type of file for the material (soft or hard)
- Keep your file clean and in good condition
- Stand in a stable position while filing
A student is given a metal strip (150 mm × 30 mm × 2 mm) that was cut with a hacksaw. The edges have rough burrs.
How to file it:
- Clamp the metal strip in the bench vice with the burr-exposed edge facing up
- Select a double-cut flat file for initial smoothing (for steel)
- Hold the file handle firmly and file using forward strokes only
- After several strokes, clean the file with a file card
- Switch to a finer file for final finishing
- Check the dimensions with a steel ruler
- Clean the finished workpiece
The result should be smooth edges with no burrs, meeting the required dimensions.
In Tanzania, electricians use filing regularly when preparing electrical enclosures and conduit boxes. For example, when installing a consumer unit at a home in Dar es Salaam, an electrician may need to file off sharp edges and burrs from a metallic junction box after cutting a hole for a cable entry. This prevents damage to the cable insulation and ensures safe electrical installation, avoiding potential short circuits or shocks.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret the technical drawing.
- Select the material, tools, and equipment for filling
- Clamp the work piece.
- Perform filling
- Apply safety measures.
- Clean the work place and work piece.
- Store the work piece, tools and equipment.
Tathmini ya matokeo
A work piece filed as per technical specifications.
Tathmini ya maarifa
Methods used: The student should explain how to carry out filling.
Principles: The student should explain principles related to filling.
Theories: The trainee should explain:
- Advantages of filling.
- Types of files.
Detailed knowledge about:
- Safety requirements
- Properties of materials Mechanical and electrical hazards while filling
Swali
What is the main purpose of filing in metalwork?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado