Mada za sehemu hiiErecting trunking and cable traysMada 3
- Erecting PVC trunking
- Installing skirting trunking
- Erecting cable trays
Erecting Cable Trays
A cable tray is a cable management system used to support, route, and protect electrical cables and wires. It is an open system, meaning it holds cables without fully enclosing them like trunking does. This design allows for flexibility and easy access during maintenance.
Cable trays are commonly used in electrical installations with large numbers of cables, such as in industries and factories. They can be constructed from steel, aluminium, fibreglass, or PVC, depending on the application and environmental conditions.
Cable trays are classified into three main types based on construction material and airflow design:
1. Perforated Cable Trays
These have a solid bottom tray designed with holes or slots to enhance ventilation. They are commonly used for data cables and electrical wiring in commercial buildings.
2. Wire Mesh Cable Trays
These are formed by a grid of steel or aluminium wires creating a mesh structure. They are lightweight and highly flexible, making them suitable for IT networks and telecommunication systems.
3. Solid Bottom Cable Trays
These have a continuous solid bottom with no holes, providing more robust protection. They are used in harsh environments like factories and industries where stronger structures are needed for cable protection.
The space factor refers to the percentage of the cable tray's internal area occupied by cables. The rule of thumb is to maintain a space factor less than or equal to 50%.
To calculate the space factor:
- Determine the total cross-sectional area of all cables to be installed.
- Determine the internal cross-sectional area of the cable tray.
- Calculate the ratio: total cable area ÷ tray internal area.
If the ratio exceeds 0.5 (50%), a larger cable tray must be selected.
Worked Example 1: Determining Cable Tray Size
Problem: Determine the size of the cable tray to house and protect:
- Ten 1.5 mm² single-core solid conductors
- Ten 2.5 mm² single-core solid conductors
- Five 4.0 mm² single-core solid conductors
Solution:
Step 1: Calculate the total cable area. Total area=(10×1.5)+(10×2.5)+(5×4) =15+25+20=60 mm2
Step 2: Apply the space factor of 0.5 (50%). Required tray internal area=0.560=120 mm2
Answer: Select a cable tray with an internal area of 120 mm² or more.
- Good ventilation: Open design prevents cables from overheating by allowing air circulation.
- Easy maintenance: Cables can be easily accessed for repairs or replacements.
- Flexibility: Cables can be added or removed as needed.
- Strength and durability: Made from steel or aluminium, they can support heavy loads.
- Cost-effective: Easy to install and require little maintenance.
- Exposure to dust: Open design allows dust to accumulate, which can damage insulation over time.
- Physical damage: Cables are exposed to tampering and accidental damage.
- Aesthetic concerns: They can look untidy, making them less suitable for places like hotels or high-end offices.
Required Tools
- Set of spanners
- Set of files
- Electrician knife
- Set of screwdrivers
- Claw hammer
- Measuring tape
- Combination pliers
- Spirit level
- Installation boards
- Schematic wiring diagrams
Required Safety Gear (PPE)
- Overalls
- Safety boots
- Safety goggles
- Leather gloves
Safety Precautions
- Wear appropriate PPE at all times.
- Inspect the site for hazards such as flammable materials or unstable surfaces.
- Ensure the power supply is turned OFF and locked out before starting work.
- Use the correct tools and keep the work area clean.
- Select cable trays of the correct size.
- Support cable trays properly and keep them clear of other services.
- Follow minimum bending radius standards to prevent cable damage.
- Perform a visual inspection after installation to ensure everything is safe and correctly in place.
- Wear appropriate PPE.
- Study and interpret the given wiring diagram to identify the layout and required tools, materials, and equipment.
- Gather all tools, materials, and equipment needed.
- Mark out the routes where the cable trays will be installed.
- Install the cable trays according to the plan.
- Check and verify the installation.
- Clean the working area and store tools, equipment, and safety gear.
In Tanzania, cable trays are commonly used in factories such as those in the Msasani or Mikocheni industrial zones, where many electrical cables need to be organized for machinery and power distribution. A technician erecting cable trays in a small-scale welding workshop in Arusha would use this skill to safely route cables from the main supply to multiple welding machines, keeping the cables organized, ventilated, and easily accessible for maintenance while preventing overheating and electrical hazards.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Draw the plan of the work.
- Identify tools, equipment and materials required.
- Perform marking out
- Cut the trunking into required size.
- Erecting cable trays
- Check and verify the trunking installation.
- Install skirting trunking.
- Install cable trays.
- Apply safety precautions.
- Clean the work place.
- Store tools and the remaining materials.
Tathmini ya matokeo
The installation of the cable tray performed per technical specifications and IEE regulations.
Tathmini ya maarifa
Methods used: The student should explain how to Erect cable trays.
Principles: The student should explain the principles related to erecting cable trays.
Theories: The student should explain:
- The construction of cable trays.
- Trunking space factors as per IEE Regulations.
- Cable tray space factor as per IEE regulations.
- Advantages of the cable tray. Circumstantial knowledge
Detailed knowledge about:
- Safe handling of special joints.
- Safe handling of tools and equipment.
Swali
What is a cable tray?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado