Mada za sehemu hiiErecting trunking and cable traysMada 3
- Erecting PVC trunking
- Installing skirting trunking
- Erecting cable trays
Trunking is a protective system used to hold and organize electrical cables. It is usually rectangular or square in shape with a removable cover. The main function of trunking is to keep cables organized, making it easier to install, maintain, or repair electrical systems. Trunking protects cables from getting tangled or damaged and reduces the risk of accidents. It is often used for surface or overhead wiring and is considered an easier-to-access alternative to conduit systems.
Trunkings are available in two main forms:
Metallic Trunking
Metallic trunkings are made from mild steel and are usually painted or galvanized to prevent corrosion. They are strong, durable, fire-resistant, and provide excellent protection for cables. Because of these qualities, they are used in:
- Industrial facilities with heavy impacts or fire risks
- Commercial buildings like malls and offices
- Hospitals and laboratories where hygiene and safety are important
- High-risk areas such as chemical plants, mines, and oil refineries
Non-metallic (PVC) Trunking
PVC trunking is made from strong polyvinyl chloride (PVC) material. It is popular because it is lightweight, easy to install, and affordable. PVC trunking is commonly used in:
- Homes and offices (low-risk areas)
- Temporary installations at events
- IT and telecom networks for routing data cables (internet and telephone cables)
- Surface wiring to keep walls neat
- Inside control panels where easy access and cable organization are required
Advantages
- Lightweight and easy to handle
- Simple and fast installation
- Cost-effective (cheaper than metal)
- Resistant to corrosion and moisture
- Easy to cut and shape
Disadvantages
- Lower mechanical strength compared to metal (requires careful handling)
- Not suitable for high-temperature areas such as near factory boilers
- Can deform when exposed to excessive heat
The trunking space factor refers to the ratio of space occupied by all cables inside the trunk to the total available space inside the trunking. The rule of thumb is to have this ratio equal to 0.45 (or 45%). This means cables must not fill more than 45% of the available space inside the trunking.
This limit is important because it:
- Simplifies installation and maintenance
- Prevents dangers of mechanical damage caused by overcrowding
- Enhances air circulation for sufficient heat dissipation
Therefore, trunk sizes must be carefully selected based on the number and size of cables being installed.
Skirting trunking refers to trunking that is commonly installed along the lower part of walls, usually at skirting board level. It is used to house and protect electrical, data, and communication cables while keeping them concealed and organized.
Advantages of Skirting Trunking
- Neat appearance because it hides cables while keeping the area clean
- Easy and quick to install due to its accessible location
- Allows cables to be added or removed easily, making maintenance simple
Types of Skirting Trunking
- PVC skirting trunking: Lightweight and easy to install; used in offices and homes
- Metal skirting trunking: Heavy but robust and fire-resistant; used in factories and commercial buildings
- Wooden skirting trunking: Offers nice interior looks; used in hotels and high-end offices
To install trunking systems safely, follow these safety measures:
- Wear appropriate PPE: Safety glasses, gloves, and safety boots
- Check the site: Look for hazards such as flammable materials or unstable surfaces
- Ensure power is OFF: The power supply must be turned off and locked out before beginning work
- Use correct tools: Use proper tools as shown in Figure 2.23 of your textbook
- Keep work area clean: Avoid accidents by maintaining a tidy workspace
- Use correct size trunks: Install trunks of the right size, properly supported and secured
- Perform visual inspection: After installation, check that everything is correctly in place and free from obstructions
The following steps guide the installation of a PVC trunking system:
Step 1: Prepare and Plan
- Wear appropriate PPE
- Study and interpret the given wiring diagram
- Plan the trunking routes, ensuring they are accessible and maintainable
Step 2: Select Materials and Tools
- Select appropriate PVC trunking sizes and corresponding accessories (couplings, elbows, tees)
- Identify and select suitable tools: spanners, files, electrician knife, screwdrivers, hammer, measuring tape, combination pliers, spirit level
Step 3: Mark the Routes
- Mark the trunking run or locations using measuring tape and spirit level to ensure straight lines
Step 4: Cut and Prepare Trunks
- Cut the PVC trunking to the required lengths using an appropriate cutting tool
- File edges smooth to prevent injury and cable damage
Step 5: Assemble and Mount
- Connect trunking sections using appropriate couplings
- Mount the trunking and support it properly using brackets or clips
- Ensure trunking is level using a spirit level
Step 6: Verify and Clean
- Check the installation to ensure everything is correctly in place
- Clean the working area and store tools
Problem: Determine the minimum internal cross-sectional area of trunking required to house 15 conductors of 2.5 mm² each.
Solution:
Total cable area = 15 × 2.5 mm² = 37.5 mm²
Using the space factor of 0.45 (45%):
Required trunking area = Total cable area ÷ Space factor = 37.5 mm² ÷ 0.45 = 83.33 mm²
Therefore, a trunking with internal cross-sectional area of at least 84 mm² should be selected.
In Tanzania, PVC trunking is commonly used during house wiring in towns like Arusha and Dodoma, where electricians install surface wiring to keep homes neat and safe. For example, when wiring a small shop in Mwanza, an electrician uses PVC trunking to organize cables along the walls, protecting the wiring from damage while making future maintenance easy if a circuit develops a fault.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Draw the plan of the work.
- Identify tools, equipment and materials required.
- Perform marking out.
- Cut the PVC trunking into the required size.
- Install PVC trunking.
- Check and verify the trunking installation.
- Apply safety precautions.
- Clean the work place.
- Store tools and the remaining materials.
Tathmini ya matokeo
Installation of PVC trunking performed as per technical specifications and IEE regulations.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to Erect PVC trunking.
Principles: The student should explain the principles related to erecting PVC trunking.
Theories: The student should explain:
- The types of trunking and their application.
- Construction of trunking and cable tray.
- Trunking space factors as per IEE Regulations.
- The advantage of PVC trunking.
Detailed knowledge about:
- Safe handling of special joints Safe handling of tools and equipment.
Swali
What is the primary function of trunking in electrical installations?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado