Mada za sehemu hiiInstalling three-phase protective devicesMada 3
- Installing three-phase over-current protective devices
- Installing three-phase earth leakage protective devices
- Installing over-voltage and under-voltage protective devices
Over-voltage and under-voltage protective devices are electrical safety devices that disconnect power supply when voltage levels become too high or too low, protecting equipment from damage and preventing safety hazards such as insulation failure and overheating.
Electrical equipment is designed to operate within specific voltage limits. When voltage exceeds the upper limit (over-voltage) or falls below the lower limit (under-voltage), the equipment can be seriously damaged.
Over-voltage usually occurs from:
- Lightning strikes
- Switching operations in the power grid
Under-voltage mainly results from:
- System overloads
- Short-circuit faults
These conditions can cause equipment malfunction, reduced lifespan, or complete failure. Installing protective devices ensures that power is automatically cut off before damage occurs, enhancing safety and reducing repair costs.
1. Surge Arresters (Over-Voltage Protectors/Limiters)
Surge arresters are designed to protect equipment from transient over-voltages, such as those caused by lightning strikes or switching surges. They provide a path to ground for excess voltage, diverting it safely away from connected equipment.
2. Surge Protection Devices (SPDs)
These are similar to surge arresters but are often used for specific applications, particularly protecting sensitive electronic equipment like computers, televisions, and communication devices.
3. Overvoltage Relays
Overvoltage relays monitor voltage levels in a circuit and automatically disconnect the power supply when the voltage exceeds a predetermined threshold. They are programmable and can be set to trip at specific voltage levels.
Under-voltage protective devices safeguard electrical equipment from damage caused by abnormally low voltage levels. They disconnect the equipment when voltage drops below a predetermined threshold.
Undervoltage Relays
These relays detect undervoltage conditions and trigger tripping of circuit breakers if voltage dips below a pre-set value. They are categorized into three types:
- Electromechanical Relays: Use magnetic fields to operate; less common in modern systems
- Static Relays: Use solid-state electronic components for faster operation; preferred over electromechanical relays
- Digital Relays: Most advanced type; use microprocessors to analyze signals and respond to voltage conditions, offering high programmability, accuracy, and reliability
Always follow these safety precautions:
- Wear appropriate PPE (safety boots, gloves, goggles, overalls)
- Switch OFF the main power supply before starting work
- Use lockout/tag-out procedures to prevent accidental power restoration
- Keep the working area clean and free from hazards
- Use insulated tools only
Follow these steps to install over-voltage and under-voltage protective devices:
Step 1: Prepare and Plan
- Wear appropriate PPE
- Study the wiring diagram provided by your teacher to understand all components and connection layout
- Gather all required tools and materials (undervoltage devices, overvoltage devices, voltage tester, multimeter, wire strippers, screwdrivers, combination pliers, cables, installation board)
Step 2: Ensure Power is Off
- Switch OFF the main supply
- Use a voltage tester to confirm that the circuit is dead (no voltage present)
Step 3: Select and Locate Devices
- Identify the load or equipment that needs protection from voltage fluctuations
- Select the correct undervoltage and overvoltage protective devices according to voltage ratings and equipment requirements
Step 4: Mount the Devices
- Mark and prepare the mounting positions for the devices on the installation board
- Mount the devices securely, ensuring they are properly aligned
Step 5: Wire the Devices
- Perform wiring according to the given wiring diagram and manufacturer instructions
- Check for loose connections and ensure all terminals are tightly secured
- Label all wires for easy identification
Step 6: Inspection and Testing
- Request your teacher to inspect your circuit before powering it ON
- After approval, switch ON the supply and test the protective devices to ensure they operate correctly
- Verify that devices trip at the correct voltage thresholds
Step 7: Complete the Work
- Clean your working area
- Store tools and materials properly
A small shop in Kigamboni has a refrigerator, television, and lighting circuits. The area experiences voltage fluctuations due to overloaded distribution lines. The electrician installs:
- An overvoltage relay set to trip at 250V (protecting against surges)
- An undervoltage relay set to trip at 180V (protecting against dips)
When voltage rises above 250V or falls below 180V, the protective devices automatically disconnect the supply, preventing damage to the refrigerator and television. This saves the shop owner from expensive equipment repairs or replacement.
In Tanzania, over-voltage and under-voltage protective devices are commonly used in homes, shops, and small businesses to protect expensive appliances like refrigerators, televisions, and air conditioning units. For example, a restaurant in Arusha using a cold storage room for preserving fresh fish and vegetables would install these protective devices to prevent damage from voltage fluctuations from the TANESCO supply, avoiding losses of food worth hundreds of thousands of shillings during power disturbances.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and materials required.
- Interpret single line and lay out drawings.
- Mark-out locations for devices to be installed.
- Fix the protective device.
- Select the correct sizes of cables as indicated by drawings.
- Connect final circuits to protective devices.
- Perform all tests.
- Observe safety precautions.
- Clean the work area
- Store tools, equipment and safety gear
Tathmini ya matokeo
Over voltage/under voltage protective device installed as per technical specifications and I.E.E. regulations.
Tathmini ya maarifa
Methods used: The student should explain how to install over-voltage and under-voltage protective devices.
Principles: The student should explain the principles related to installing over-voltage and under-voltage protective devices.
Theories: The student should explain:
- The types of overvoltage and under-voltage protective devices.
- The importance of over-voltage and under-voltage protective devices Circumstantial Detailed knowledge about.
- Hazards control
- Causes and control of defects
Swali
What is the primary function of over-voltage and under-voltage protective devices in an electrical installation?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado