Mada za sehemu hiiPerforming metering and tariffingMada 3
- Measuring electric power
- Measuring electric energy (kWh and kVAh)
- Applying electricity tariffs
Measuring Electric Power and Energy
Measuring electric power and energy is essential in electrical installations. Power measurement tells us how much electrical energy is being used at any moment, while energy measurement tracks total consumption over time. Both measurements are important for billing, safety, and efficient operation of electrical systems.
What is Electric Power?
Electric power (P) is the rate at which electrical energy is transferred or converted. It is measured in Watts (W). The higher the power, the more electrical energy is used per second.
Power in DC Circuits
In a direct current (DC) circuit, power is calculated by multiplying voltage and current:
P=V×I
Where:
- P = Power in Watts (W)
- V = Voltage in Volts (V)
- I = Current in Amperes (A)
Power in AC Circuits
In alternating current (AC) circuits, power exists in three forms:
-
Active Power (P) — Also called real power. This is the actual power used to perform useful work, such as lighting a bulb or running a motor. Measured in Watts (W).
-
Reactive Power (Q) — Power that oscillates between the source and reactive components (inductors and capacitors) in an AC circuit. It does not perform useful work but is needed to maintain magnetic fields in motors and transformers. Measured in Volt-Amperes Reactive (VAr).
-
Apparent Power (S) — The total power supplied to an AC circuit, combining both active and reactive power. Measured in Volt-Amperes (VA).
The three types of power form a right-angled triangle called the power triangle:
S2=P2+Q2
Power Factor is the ratio of active power to apparent power. It is the cosine of the phase angle (θ) between current and voltage:
cosθ=SP
Power factor is a unitless number between 0 and 1. A power factor of 1 (unity) means all power is used for useful work. A low power factor means more current is needed to deliver the same amount of useful power, leading to higher losses and costs.
Wattmeter
A wattmeter is an instrument used to measure electric power. It has two coils:
- Current Coil (CC) — Connected in series with the load. The current flowing through the load also flows through this coil.
- Voltage Coil (VC) — Connected in parallel with the load. It experiences the full load voltage.
A high-value resistor is connected in series with the voltage coil to limit the current through it.
Types of Wattmeter
-
Induction Type Wattmeter — Used only for AC power measurement. It works on electromagnetic induction and has a rotating aluminum disc.
-
Electrodynamometer Type Wattmeter — Can be used for both AC and DC power measurement. It has fixed coils (current coil) and a moving coil (voltage coil).
For three-phase circuits, power is often measured using two wattmeters connected together, and the total power is the sum of both meter readings.
What is Electric Energy?
Electric energy is the total amount of electricity consumed over time. It is measured in:
- Joule (J) or Watt-second (Ws) — The SI unit
- Kilowatt-hour (kWh) — The practical commercial unit
The relationship between them: 1 kWh=1 kW×1 hour=1000 W×3600 s=3.6×106 J
Energy Meters
An energy meter (or electricity meter) measures the total electrical energy consumed over time, usually in kilowatt-hours (kWh). Unlike a wattmeter that shows instantaneous power, an energy meter shows cumulative energy usage.
Types of Energy Meter
By Technology:
- Analog (Electromechanical) Meter — Uses a spinning disk to measure consumption. Simple and easy to maintain but less accurate.
- Digital (Electronic) Meter — Uses digital technology for more accurate measurement. Can provide real-time data and remote monitoring.
By Phase:
- Single-phase Meter — Used in residential buildings and small businesses.
- Three-phase Meter — Used in industrial and commercial buildings.
By Payment System:
- Post-paid Meter — Customer pays after consuming electricity.
- Pre-paid Meter (LUKU) — Customer buys units in advance. "LUKU" stands for "Lipa Umeme Kadiri Utumiavyo" (Pay for electricity as you use it).
How Energy Meters Work
Energy meters measure energy by:
- Measuring current — Using current coils connected in series with the circuit
- Measuring voltage — Using voltage coils connected in parallel with the circuit
- Calculating energy — Continuously monitoring voltage and current, then integrating power over time to give energy in kWh
When measuring power or energy, always follow these safety rules:
- Switch OFF the power before setting up measuring instruments
- Use insulated tools and wear appropriate PPE (overalls, safety boots, gloves, goggles)
- Inspect test leads to ensure they are not damaged or worn
- Make sure leads have protective covers to prevent accidental contact with live parts
- Use a voltage tester to confirm the circuit is de-energized before working
- Ensure all connections are correct before turning power back on
- Keep the work area clean and organized
A household in Dar es Salaam has the following appliances:
- 4 bulbs of 60 W each, used for 6 hours
- 2 fans of 80 W each, used for 5 hours
- 1 television of 150 W used for 4 hours
Calculate the total energy consumed in one day.
Solution:
First, find daily energy for each appliance:
- Bulbs: 4×60 W×6 h=1440 Wh=1.44 kWh
- Fans: 2×80 W×5 h=800 Wh=0.80 kWh
- Television: 1×150 W×4 h=600 Wh=0.60 kWh
Total energy consumed: 1.44+0.80+0.60=2.84 kWh
If the tariff is TSh 300 per kWh, the daily cost would be: 2.84×300=TSh 852
In Tanzania, understanding how to measure electric power and energy helps you manage household electricity costs. For example, when you buy LUKU credit for your pre-paid meter, the amount of kWh you receive depends on the tariff rate — if the rate is TSh 350 per kWh and you buy TSh 7,000 worth of credit, you receive 20 kWh to use for lighting, charging phones, or running appliances. Knowing how to calculate energy consumption also helps you identify which appliances use the most power, so you can use them wisely and avoid high bills.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Identify Tanzania Electric Supply Company Limited (TANESCO) tarrifing categories.
- Read the electrical units consumed.
- Record the readings.
- Regrade data in tariff categories.
- Charging the data as per the tariff category.
- Store the data/reading to the respective areas.
Tathmini ya matokeo
Reading taken on both kVA and kW meters recorded accurately
Tathmini ya maarifa
Knowledge evidence:
Methods used: The student should explain how to measure electric power.
Principles: The student should explain the principles related to Measuring electric power.
Theories: The student should explain:
- Electrical symbols used in metering and tarrifing.
- Different types of tariffs.
- The term metering and tarriffing.
- .
Detailed knowledge about: Safe handling of analogue and digital kilowatt meters.
Swali
What is the SI unit of electric power?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado