Mada za sehemu hiiPerforming metering and tariffingMada 3
- Measuring electric power
- Measuring electric energy (kWh and kVAh)
- Applying electricity tariffs
Electric energy is the amount of electrical work done or heat generated by an electric current over a period of time. It is measured to determine how much electricity has been consumed so that consumers can be billed accurately.
Electric energy is the energy resulting from the flow of electric current. It can be converted into other forms of energy such as light, heat, or motion. When electrical appliances like bulbs, fans, or refrigerators operate, they consume electric energy. This consumption is recorded by the electricity meter, and customers are charged based on the amount of energy used.
Electric energy has two main units of measurement:
Joule (J) or Watt-second (Ws) — This is the standard unit of energy in the International System of Units (SI). It is commonly used in scientific calculations.
Kilowatt-hour (kWh) — This is the practical unit used for commercial billing. It represents the amount of energy consumed when a load of 1 kilowatt operates for 1 hour.
The relationship between these units is:
1 kWh=1000 W×3600 s=3,600,000 J=3.6×106 J
In everyday billing, 1 kWh is called 1 unit of electricity.
The instrument used to measure electric energy is called an electricity meter or energy meter. Unlike a wattmeter that measures instant power, an energy meter measures the total energy consumed over time, usually displayed in kilowatt-hours (kWh).
Types of Energy Meters
By Technology:
- Analogue (electromechanical) meters — These use a spinning aluminum disc. The disc rotates at a speed proportional to the power consumed, and mechanical counters record the total energy. They are simple and durable but less accurate than digital meters.
- Digital (electronic) meters — These use electronic circuits to measure and display energy consumption. They are more accurate, can provide real-time data, and support remote reading. However, they are more expensive than analogue meters.
By Phase:
- Single-phase meters — Used in residential buildings and small commercial premises where the supply is 230V.
- Three-phase meters — Used in industrial and large commercial buildings where the supply is 400V or higher.
By Payment Method:
- Post-paid meters — Customers receive bills after consuming electricity (the traditional system).
- Pre-paid meters — Customers purchase electricity units in advance. In Tanzania, these are commonly known as LUKU meters (Lipa Umeme Kadiri Utumiavyo — "Pay for electricity as you use it").
An energy meter measures energy by continuously monitoring both the voltage and current in a circuit and then calculating the energy used over time. The process works as follows:
-
Current measurement — Current coils connected in series with the circuit produce a magnetic field proportional to the current flowing through the load.
-
Voltage measurement — Voltage coils connected in parallel with the circuit produce a magnetic field proportional to the voltage across the load.
-
Calculation — The meter continuously multiplies voltage, current, and time to compute the energy consumed. In analogue meters, this drives a rotating disc; in digital meters, it is processed electronically and displayed on a screen.
Always follow these safety rules before working with energy meters:
- Switch OFF the main power supply before making any connections.
- Use insulated tools and wear appropriate PPE (personal protective equipment) such as plastic gloves, safety goggles, overalls, and safety boots.
- Check all test leads and connections to ensure they are not damaged or loose.
- Use a voltage tester to confirm the circuit is de-energized before touching any wires.
- After completing the connections, have your teacher inspect and approve the wiring before switching the power back on.
Problem: A household has the following appliances:
- 2 bulbs of 60W each, used for 10 hours
- 1 electric iron of 1000W, used for 2 hours
Calculate the total electric energy consumed in kilowatt-hours.
Solution:
First, calculate energy for each appliance:
-
Energy for bulbs: P=2×60 W=120 W=0.12 kW
Energy = 0.12 kW×10 h=1.2 kWh
-
Energy for iron: P=1000 W=1 kW
Energy = 1 kW×2 h=2 kWh
Total energy consumed = 1.2 + 2 = 3.2 kWh
Therefore, the household consumes 3.2 units of electricity.
In groups and under your teacher's supervision, follow these steps to measure electric energy using a single-phase kilowatt-hour meter:
- Wear appropriate PPE and switch OFF the main power supply.
- Use a voltage tester to confirm the circuit is not energized.
- Identify the input (source) terminals and output (load) terminals on the meter using the wiring diagram.
- Fix the kWh meter securely on the installation board.
- Connect incoming (source) wires to the input terminals of the meter.
- Connect outgoing (load) wires to the output terminals of the meter.
- Connect a load (such as a lamp) to the output of the meter.
- Have your teacher inspect and approve the connections.
- Switch ON the power supply and record the initial meter reading.
- Allow the load to run for a known time (for example, 10 minutes).
- Record the final reading and calculate the energy consumed.
- Switch OFF the power, clean your workspace, and store all tools properly.
In Tanzania, every household with electricity uses an energy meter (such as a LUKU pre-paid meter) to measure electricity consumption. When you buy electricity units at a local shop or via mobile money (such as M-Pesa or Tigo Pesa), the amount you pay is calculated based on the kilowatt-hours (kWh) you have purchased. Understanding how electric energy is measured helps you estimate how much your monthly electricity bill will be and plan your budget accordingly — for example, knowing that a 100-watt bulb running for 10 hours consumes 1 kWh (1 unit) helps you decide how long to use appliances to stay within your budget.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Identify TANESCOtar rifing categories.
- Read the electrical units consumed.
- Record the readings.
- Regrade data in tariff categories.
- Charging the data as per the tariff category.
- Store the data/reading to the respective areas.
Tathmini ya matokeo
Reading taken on both kVAh and kWh cost, and billed.
Tathmini ya maarifa
Methods used: The student should explain how to measure electric energy.
Principles: The student should explain the principles related to measuring electric energy.
Theories: The student should explain: Methods of calculating customer electric bills.
- Different types of tariffs.
- The analogue and digital energy meters.
- The term metering and tariffing.
- The uses of tools and equipment.
Detailed knowledge about: Safe handling of analogue and digital kilowatt meters.
Swali
What is the practical unit used for commercial billing of electricity consumption?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado