Mada za sehemu hiiInstalling and repairing waste appliancesMada 6
A bidet is a sanitary appliance used for personal cleaning after using the toilet. It looks similar to a low-mounted washbasin and is installed in the toilet area, usually next to or attached to the toilet bowl. In Tanzanian schools and homes, bidets are becoming more common, especially in improved sanitation facilities. As a plumbing student, you must learn how to install and repair bidets correctly to ensure they work properly and do not leak or cause water damage.
There are two main types of bidets you should know:
1. Stand-alone Bidet
This is a separate unit that looks like a low basin with a faucet. It is mounted on the floor or on a pedestal and has its own water supply and waste connection. The user sits on the rim and uses the faucet to clean themselves.
2. Bidet Attachment (or Toilet Seat Bidet)
This type fits onto an existing toilet bowl. It has a spray nozzle that extends to provide cleaning water. Some are manual, while others are electronic with heated water and air dryers.
3. Hand-held Bidet Spray (Shatta)
This is a flexible hose with a spray nozzle attached to the toilet cistern or wall. It is very common in Tanzania and can be installed easily on existing toilets.
Bidets are made from materials that can withstand constant water exposure and are easy to clean:
- Ceramic (Porcelain): Most common for stand-alone bidets. It is durable, easy to clean, and resists stains.
- Plastic: Used for bidet attachments and spray nozzles. Lightweight and affordable.
- Stainless steel: Used for fixtures like faucets and spray heads. Strong and corrosion-resistant.
- Chrome plating: Applied to metal parts for a shiny, rust-resistant finish.
Before installing or repairing a bidet, gather these tools and equipment:
- Adjustable spanner – for tightening nuts and fittings
- Screwdriver – for securing screws
- Tape measure – for accurate measurements
- Spirit level – to ensure the bidet is level
- Mark pen or chalk – for marking positions
- Drill machine with concrete bit – for drilling holes in floors or walls
- Hacksaw – for cutting pipes if needed
- Centre punch – for starting drill holes
- PPE (Personal Protective Equipment): gloves, safety goggles, and sturdy shoes
Follow these steps carefully to install a bidet correctly:
Step 1: Check the Location
Choose a suitable location near the toilet with enough space. Ensure there is access to a water supply line and a waste drain pipe.
Step 2: Mark the Position
Place the bidet in position and use a spirit level to check that it is level both front-to-back and side-to-side. Mark the mounting holes on the floor with a mark pen or chalk.
Step 3: Drill Mounting Holes
Drill holes at the marked positions using a drill machine with the appropriate concrete bit. Insert wall plugs if needed.
Step 4: Connect the Water Supply
Connect the flexible hose from the bidet's faucet to the water supply line. Use an adjustable spanner to tighten the connections firmly, but avoid overtightening which can damage the washers.
Step 5: Connect the Waste Pipe
Insert the bidet's waste outlet into the drain pipe. Apply plumber's tape to the threads to ensure a watertight seal. Secure with a slip nut and tighten with an adjustable spanner.
Step 6: Mount the Bidet
Align the bidet with the drilled holes and secure it to the floor using the provided bolts or screws. Check again with a spirit level to confirm it is level.
Step 7: Test for Leaks
Turn on the water supply and check all connections for leaks. Run water through the bidet faucet and let it drain to ensure the waste connection is working properly.
1. Leaking Faucet
Cause: Worn-out washer or O-ring. Repair: Turn off the water supply, disassemble the faucet handle, replace the damaged washer or O-ring, and reassemble.
2. Slow Drainage
Cause: Blockage in the waste pipe or trap. Repair: Use a plunger to clear minor blockages. For stubborn blockages, disassemble the trap and clean out debris.
3. Loose Mounting
Cause: Screws or bolts have come loose over time. Repair: Tighten the mounting bolts. If the holes are stripped, drill new holes and use longer screws or wall plugs.
4. Cracked Ceramic
Cause: Impact damage or improper installation. Repair: Small hairline cracks can be sealed with waterproof epoxy. Large cracks require replacement of the bidet.
- Always wear PPE, especially safety goggles when drilling and gloves when handling pipes.
- Turn off the main water supply before starting any repair work.
- Ensure the work area is dry to prevent slips.
- Handle tools carefully to avoid injury.
- Dispose of old materials and packaging properly.
A primary school in Dodoma wants to add hand-held bidet sprays to 5 toilet cubicles. Each spray costs TSh 25,000, and the school has a budget of TSh 150,000. Calculate whether the budget is sufficient.
Solution: Cost per spray = TSh 25,000 Number of sprays needed = 5 Total cost = 25,000 × 5 = TSh 125,000
Budget available = TSh 150,000
Since TSh 125,000 < TSh 150,000, the budget is sufficient. There will be TSh 25,000 remaining for additional fittings like washers or plumber's tape.
Organize into groups of 3-4 students. Each group will install a bidet attachment or hand-held spray in a designated toilet area at your school. Follow the installation steps, check for leaks, and record any problems encountered and how they were solved.
In many Tanzanian households and public schools, installing bidet sprays or attachments is a common plumbing task that costs much less than installing full bidet units. A local plumber in Mwanza might charge between TSh 30,000 and TSh 50,000 to install a hand-held bidet spray, including materials. Knowing how to install and repair bidets yourself can save this money and provide a useful skill for starting a small plumbing business in your community.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret working drawings.
- Take measurements.
- Drilling
- Install bidets
- Install related trap.
- Repair and service bidets.
- Clean tools and workplace
- Store tools and equipment.
- Connecting waste pipe
- Connecting water to bidets
Tathmini ya matokeo
Bidets fixed and repaired as per specification.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain procedures of performing installation, servicing and repairing bidets.
Principles: The student should explain principles of:
- Installing bidets.
Theories: The student should explain: -
- Position of installing bidets.
Detailed knowledge about:
- Safety precautions while fixing bidets
- Environment requirements
Swali
Which two types of bidets are the main ones mentioned in the lesson?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado