Mada za sehemu hiiInstalling and maintaining underground drainage systemMada 6
Separate Systems in Underground Drainage
A separate system is a drainage system in which sanitary sewage (waste from toilets, bathrooms, kitchens, and washbasins) and surface water (rainwater, runoff from roofs and paved areas) are carried in two completely independent pipe networks. Each type of water flows through its own dedicated pipe system and is discharged separately — sanitary sewage goes to a sewage treatment plant, while surface water is directed to a watercourse, soakaway, or storm drain.
This separation is a key feature of modern drainage design, especially in areas where sewage treatment capacity is limited or where flooding from heavy rainfall is a concern.
The main features that distinguish a separate system from a combined system (where all water flows in the same pipe) include:
- Two independent pipe networks: One network carries foul/sanitary water; the other carries surface water.
- Separate outfalls: Sanitary sewage is discharged to a sewer or septic tank, while surface water is discharged to a storm drain, river, or soakaway.
- Pipe sizing: Each system is sized according to the type and volume of water it carries. Sanitary pipes are generally smaller because sewage flow is more predictable, while storm water pipes must accommodate large volumes during rainfall.
- Materials selection: Both systems may use similar materials (cast iron, PVC, pitch fiber), but the sizing and installation requirements differ.
Advantages
- Prevents overloading of sewage treatment works: During heavy rain, a combined system can flood treatment plants with rainwater, reducing treatment efficiency. A separate system keeps sewage separate.
- Reduces flood risk: Surface water is carried away quickly through dedicated storm water pipes, lowering the risk of surface flooding.
- Improved sewage treatment: Because sewage is not diluted with large amounts of rainwater, treatment processes work more effectively.
- Cost-effective maintenance: Problems in one system do not automatically affect the other, making diagnosis and repair easier.
Disadvantages
- Higher installation cost: Two sets of pipes mean more materials, more excavation, and more labor.
- Requires more space: Two separate pipe routes need more underground space, which can be challenging in densely built areas.
- More complex layout: Planning and installing two independent networks requires careful design.
When designing or installing a separate drainage system, the following factors must be taken into account:
1. Pipe Size
- Pipe diameter is determined by the number of fixtures served and the expected flow rate.
- For sanitary pipes, the minimum diameter is typically 100 mm for soil pipes and 75 mm for waste pipes.
- Storm water pipes are usually larger, starting at 100 mm and increasing based on the roof area or paved surface being drained.
2. Gradient (Slope)
- Pipes must be laid at the correct gradient to ensure water flows by gravity.
- The minimum recommended gradient is 1:40 for 100 mm pipes and 1:60 for 150 mm pipes.
- Too steep a gradient can cause liquids to outrun solids, leading to blockages; too shallow a gradient causes slow flow and sedimentation.
3. Materials
Common materials for separate systems include:
- Cast iron: Durable, corrosion-resistant, used for foul water and some storm water applications.
- Plastic (PVC): Lightweight, easy to handle, corrosion-resistant, now the most common material for both sanitary and storm water systems.
- Pitch fiber: A traditional material, rarely used in new installations but may be encountered in older systems.
4. Depth of Installation
- Pipes must be laid below the frost line (not a major concern in Tanzania) and deep enough to avoid damage from surface traffic.
- A minimum cover of 600 mm is typical for pipes under roads or pathways.
5. Location of Outfalls
- The sanitary system outfall must be to a sewer, septic tank, or treatment facility.
- The storm water outfall must be to a legal discharge point — a river, soakaway, or storm drain — away from buildings to prevent dampness or flooding.
6. Access for Maintenance
- Inspection chambers or manholes must be provided at changes of direction, at junctions, and at intervals not exceeding 45 metres.
- These allow clearing of blockages and routine inspection.
A primary school in Arusha has a single-storey building with 4 classrooms, 2 toilets, and a staff room. The roof area draining to the gutters is 120 square metres. The school is connected to a municipal sewer. The caretaker plans to install a separate drainage system.
Determine the key design decisions:
-
Sanitary system: The 2 toilets and staff room will produce sanitary waste. A 100 mm soil pipe with a gradient of 1:40 is suitable for connecting to the municipal sewer.
-
Storm water system: With 120 m² of roof area, a 100 mm or 150 mm storm water pipe is required, depending on local rainfall intensity. The pipe must be laid at a gradient of at least 1:60 and directed to a nearby storm drain or soakaway pit.
-
Materials: PVC pipes are chosen because they are affordable, lightweight, and easy to join using solvent cement or rubber seals.
-
Access points: Inspection chambers are placed at the corner of the building where the sanitary and storm water lines meet the external boundary.
When installing a separate system, always follow safe working practices:
- Wear appropriate PPE: gloves, safety boots, hard hat, and eye protection.
- Ensure excavation trenches are properly shored or battered to prevent collapse.
- Check for underground services (electricity, water) before digging.
- Use correct tools — pipe cutters for plastic, wrenches for tightening fittings.
- Check alignment and gradient using a spirit level.
- Ensure all joints are tight and leak-free before backfilling.
Regular maintenance ensures the system continues to work effectively:
- Inspect chambers regularly for blockages or leaks.
- Clear debris from grates, gutters, and trap guards.
- Check gradients over time, as ground movement can affect pipe alignment.
- Repair cracks or leaks promptly to prevent water ingress or soil contamination.
In Tanzania, many new housing estates and schools now require separate drainage systems to be approved by local authorities. For example, a landlord in Dar es Salaam installing a separate system for a rental apartment block must ensure that sanitary waste goes to the municipal sewer while rainwater from the roof is directed to a soakaway pit or storm drain. This prevents the sewer from overflowing during the rainy season and protects the property from flooding — a practical application that also complies with public health regulations.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret working drawings
- Identify tools
- Select materials
- Determine drain fall.
- Lay drain
- Perform drain test
- Backfill the trench
- Connect pipes to sewerage disposal
- Clean the work place
- Clean tool and store in a safe place
Tathmini ya matokeo
Separate system installed and maintained as per specification.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain: -
- How to install and maintain separate system.
Principles: The student should explain principles of:
- Installing separate system.
Theories: The student should explain: -
- The importance of drain ventilation.
- Properties of a good separate drainage system
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions to be observed while maintaining separate system.
- First aid
Swali
What is the main characteristic that distinguishes a separate drainage system from a combined system?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado