Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting equipment and materials
- Handling different types of fire
Fire is the combustion of any material that can burn with the generation of heat and light. Fire occurs when three elements are present in the correct combination — this is called the fire triangle: fuel, heat, and oxygen. If any one of these elements is removed, the fire stops burning. Understanding this helps us know how to extinguish different types of fires.
Fires are categorized into classes based on what is burning. Using the wrong extinguishing agent can make the fire worse, so it is important to identify the correct class.
| Class | Type of Fire | Common Examples | Suitable Extinguishing Agent |
|---|---|---|---|
| Class A | Solid materials | Wood, paper, textiles, rubber | Water, foam, dry powder |
| Class B | Flammable liquids | Petrol, diesel, oil, grease | Foam, dry powder, CO₂ |
| Class C | Gases | Propane, butane, acetylene | Dry powder |
| Class D | Metals | Magnesium, aluminum, sodium | Special dry powder |
| Class E | Electrical appliances | Wiring, motors, switches | CO₂, dry powder |
| Class F | Cooking oils | Cooking oil, fat | Wet chemical, fire blanket |
In a motor vehicle mechanic's workshop, Class B (petrol, diesel, oil), Class E (electrical), and Class A (paper, rags) fires are the most common.
Different fires need different agents to stop the chemical reaction:
- Water — Effective for Class A fires. Never use on electrical fires (Class E) or flammable liquid fires (Class B) because water can spread the fire or cause electrical shock.
- Dry Chemical Powder — Works on Class A, B, C, and E fires. This is the most versatile extinguisher for workshops.
- Carbon Dioxide (CO₂) — Best for Class E electrical fires. It does not leave residue and is safe for electronics.
- Foam — Used for Class A and B fires. It blankets the fire and prevents re-ignition.
- Wet Chemical — Specifically for Class F cooking oil fires.
There are three main methods to put out a fire:
1. Cooling
This removes heat from the fire. Water absorbs heat very effectively. Do not use on flammable liquid fires or electrical fires.
2. Starving
This removes the fuel source. For example, shutting off a gas valve or moving flammable materials away from the fire.
3. Smothering
This removes oxygen. Covering the fire with a fire blanket, sand, or using CO₂ gas cuts off the oxygen supply.
When using a fire extinguisher, remember the PASS technique:
- Pull the safety pin from the handle.
- Aim the nozzle at the base of the fire.
- Squeeze the handle to release the extinguishing agent.
- Sweep the nozzle from side to side at the base of the fire.
Follow these techniques when fighting a fire:
- Attack from the wind direction — Move towards the fire so the wind blows the flames away from you.
- Extinguish liquid fires from the top down — Start at the top edge and sweep downward.
- Extinguish wall fires from the bottom up — Hit the bottom of the flames first.
- Use several extinguishers together — If one is not enough, use more at the same time rather than one after another.
- Watch for backdraft — A backdraft occurs when fresh oxygen is suddenly introduced into a smoke-filled space, causing an explosion. Ventilate carefully.
Scenario: You are working in a garage and a fire starts in a pile of oily rags near a workbench.
Solution:
- Identify the class of fire: The rags are soaked in oil, so this is a Class B (flammable liquid) fire.
- Choose the correct extinguisher: Use a foam or dry powder extinguisher. Never use water.
- Apply the PASS method:
- Pull the pin
- Aim at the base of the flames
- Squeeze the handle
- Sweep from side to side
- If the fire is too large, evacuate immediately and call the fire service.
In Tanzania, a mechanic at a local garage in Dar es Salaam or Arusha uses this knowledge daily when working with petrol, diesel, and electrical systems. For example, when a customer's car catches fire due to a fuel leak, the mechanic must quickly identify it as a Class B fire, grab the correct foam extinguisher, and use the PASS method to put out the flames before they spread to nearby vehicles — a skill that protects lives and property worth millions of Tanzanian shillings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment, and safety gears
- Identify common classes of fire
- Use first aid kit
- React correctly and safely when faced with different types of fire
- Apply the right class of fire extinguisher
- Handle different types of fire
- Apply the right class of firefighting materials
- Check and test fire extinguishers
- Clean up tools, equipment, and working place
- Store tools, equipment, and safety gears
Tathmini ya matokeo
Different types of fire are handled as per rules and regulations.
Tathmini ya maarifa
Method used — the student should explain how to:
- Identify different types of fire extinguishers
- Apply the right type of fire extinguishers
- Apply right type of firefighting materials
Principles — the student should explain the principles of:
- Identifying different types of fire extinguishers
- Checking and testing fire extinguishers
- Applying right class of fire extinguishers
Theories — the student should explain:
- Importance of handling fire accidents
- Types and common classes of fire
- Handling different types of fire
- Importance of handling fire extinguishers
Circumstantial knowledge — detailed knowledge about:
- Safety precautions while handling fire accidents
- Safe handling of tools and equipment
- Waste disposal methods
Swali
Which of the following is NOT one of the three elements of the fire triangle?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado