Mada za sehemu hiiPerforming first aidMada 2
- Performing artificial respiration
- Performing first aid on minor scalpel wounds / injuries
Performing Artificial Respiration
Artificial respiration, also called rescue breathing, is a first aid technique used to help someone breathe when they cannot breathe on their own. It involves giving air from your lungs to the victim through their mouth or nose. This technique is very important because when breathing stops, the blood loses oxygen and the brain can be damaged within minutes. Starting artificial respiration quickly can save a person's life.
In the workshop, accidents can happen that stop a person's breathing, such as electric shock, choking, or being trapped in a small space without fresh air. When breathing stops, the person will become unconscious quickly. Without oxygen in the blood, irreversible brain damage or death may occur within a few minutes. Therefore, you must start artificial respiration immediately and continue until medical help arrives.
The main types of artificial respiration include:
- Mouth-to-mouth breathing (rescue breathing): Air is blown from the rescuer's lungs into the victim's mouth
- Cardiopulmonary resuscitation (CPR): Combines rescue breathing with chest compressions when the heart has also stopped
- Oxygen therapy: Using oxygen equipment to help the victim breathe
- Mechanical ventilation: Using a machine to help breathing (done by medical professionals)
For a first aider in a workshop, mouth-to-mouth breathing is the most common and practical technique.
Follow these steps carefully when performing artificial respiration:
Step 1: Prepare the victim Place the casualty on a firm, flat surface on their back. Kneel beside them.
Step 2: Position your hands Place the heel of one hand on the lower half of the sternum (breastbone). Place your other hand on top. Straighten your arms and position yourself over the casualty's chest.
Step 3: Open the airway Use your index finger and thumb to pinch closed the soft part of the casualty's nose. Use your other hand to open the casualty's mouth wide.
Step 4: Seal the mouth Take a deep breath and form a tight seal with your mouth over the casualty's mouth, covering both lips completely.
Step 5: Give rescue breaths Blow into the victim's mouth at a steady rate for about 1 second. Watch for the chest to rise. Then let the air escape and watch for the chest to fall. Give a second rescue breath.
Step 6: Continue breathing If the casualty does not start breathing, continue to inflate the lungs at a rate of once every 4 seconds (about 15 breaths per minute) until breathing starts or help arrives.
Step 7: Check for pulse Check for a pulse at the neck. If there is no pulse, this means the heart has stopped beating. In this case, external chest compression (CPR) is needed together with rescue breathing.
Step 8: Recovery position When the casualty is breathing on their own, place them in the recovery position: face down with the head turned to one side, supported by one hand, with the other arm flat on the floor and one leg bent.
If the chest does not rise when you give a breath, the airway may be blocked. Before continuing:
- Check the mouth and throat for obstructions such as food, vomit, or foreign objects
- Remove any visible obstructions with your fingers
- Tilt the head back slightly to open the airway
- Try again to give rescue breaths
Every workshop should have a first aid kit that contains:
- Bandages and dressings for wounds
- Antiseptic cream or ointment
- Sterile gauze pads
- Disposable gloves
- Scissors and tweezers
- Cotton wool
- Pain relief medicine
- Eye wash solution
These supplies help you treat injuries quickly and safely while waiting for professional medical help.
Imagine your colleague receives an electric shock while repairing a vehicle and stops breathing. You should:
- First, make the area safe by turning off the electricity
- Place the victim on their back on a firm surface
- Open the airway by tilting the head back and pinching the nose
- Give rescue breaths every 4 seconds
- Check for pulse; if none, also perform chest compressions
- Continue until the victim starts breathing or help arrives
- Once breathing, place the victim in the recovery position
This quick action could save your colleague's life.
In Tanzania, workshops and garages can be found in many towns, such as along the road in Arusha or in the Kariakoo market area of Dar es Salaam. If a mechanic receives an electric shock from faulty wiring or suffers from smoke inhalation while working on a vehicle, knowing artificial respiration can mean the difference between life and death. A student who learns this skill can help save a coworker or family member in an emergency before an ambulance arrives, which may take time on busy Tanzanian roads.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools and equipment
- Identify types of injuries
- Perform artificial respiration
- Attend minor wounds
- Sterilise first aid tools
- Observe safety precautions
- Store first aid kit
Tathmini ya matokeo
First aid offered conforms to medical requirements.
Tathmini ya maarifa
Method used — the student should explain how to perform artificial respiration.
Principles — the student should explain the principles of performing artificial respiration.
Theories — the student should explain:
- Types of artificial respiration
- The use of accessories in a first aid kit
Circumstantial knowledge — detailed knowledge about:
- Safety precautions to be observed while performing artificial respiration
- Waste disposal
Swali
What is artificial respiration?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado