Mada za sehemu hiiPerforming turningMada 3
- Performing parallel turning
- Performing taper turning
- Performing knurling
Knurling is a metalworking operation performed on a lathe to produce a patterned texture on the surface of a workpiece. This texture provides a better grip for hand-operated parts such as tool handles, knobs, and adjustment screws.
Knurling is the process of deforming the surface of a metal workpiece by pressing a hardened steel knurling tool into it while the workpiece rotates on a lathe machine. The result is a series of raised patterns—straight, diagonal (angled), or crossed—that create a rough surface suitable for gripping.
- Lathe machine with accessories
- Knurling tool (holder with interchangeable knurling wheels)
- Centre drill
- Vernier caliper
- Micrometer
- Steel rule
- Depth gauge
- Workpiece (typically mild steel or brass rod)
- Safety gears (safety glasses, gloves)
1. Prepare the Workpiece
- Select a suitable workpiece (e.g., a 10 mm diameter mild steel rod)
- Measure the workpiece diameter using a micrometer or vernier caliper
- Center drill both ends of the workpiece to allow it to mount securely between the lathe centers
2. Set Up the Lathe
- Mount the workpiece between the lathe centers or in a chuck
- Select an appropriate spindle speed (usually slower speeds for knurling, around 200–400 rpm for small workpieces)
- Set the lathe to manual feed
3. Select and Install the Knurling Tool
- Choose the correct knurling wheel pattern:
- Straight knurling – parallel lines
- Angular knurling – diagonal lines (typically 30° or 45°)
- Crossed knurling – combination of straight and angular
- Insert the knurling wheel into the tool holder
- Position the tool so the wheel is parallel to the workpiece axis
4. Perform the Knurling Operation
- Bring the knurling tool into light contact with the workpiece
- Apply gradual radial pressure while the workpiece rotates
- Move the tool longitudinally along the workpiece to create the full pattern
- Release pressure and retract the tool before stopping the lathe
5. Inspect the Work
- Check the knurled surface for uniform pattern and depth
- Measure the final diameter with a micrometer
- Ensure no burrs or irregularities are present
Students work in groups of three to four to complete the knurling task:
- Planning: Each group selects a workpiece and decides on the knurling pattern
- Setup: One student operates the lathe while others assist with measurements
- Execution: Perform knurling following the steps above
- Inspection: Check the finished workpiece against quality criteria
- Discussion: Group discusses any difficulties faced and how to improve
A student needs to knurl a 12 mm diameter brass rod to create a grip section of 20 mm length using crossed knurling.
| Step | Action |
|---|---|
| 1 | Measure original diameter: 12.00 mm |
| 2 | Set lathe speed to 250 rpm |
| 3 | Apply knurling tool with medium pressure |
| 4 | Feed tool longitudinally for 20 mm length |
| 5 | Measure final diameter: 12.40 mm (slight increase due to material displacement) |
The slight increase in diameter confirms successful knurling—the material has been displaced upward to form the pattern.
- Always wear safety glasses when operating the lathe
- Ensure loose clothing and hair are secured
- Never adjust the tool while the lathe is running
- Keep hands away from rotating workpieces
In Tanzania, knurling is applied in workshops and garages when repairing vehicles—knurled surfaces are found on adjustment knobs for carburetors, throttle controls, and steering wheel spokes. A mechanic in Dar es Salaam might regrind a worn knob and knurl a new brass insert to restore a secure grip, ensuring reliable operation of fuel and air controls on commonly used vehicles like Toyota and Nissan pickups.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings
- Select tools and equipment
- Select proper materials and tool
- Take measurements
- Cut the material to dimensions
- Select speed, feed and depth of cut
- Face workpiece
- Centre drill workpiece
- Perform rough turning
- Perform turning to finish
- Observe safety precautions
- Clean tools, equipment, and workplace
- Store tools and equipment
Tathmini ya matokeo
Machined workpiece conforms to technical specifications.
Tathmini ya maarifa
Method used — the student should explain how to:
- Perform knurling on a lathe machine
Principles — the student should explain the principles of:
- Performing the knurling operation
Theories — the student should explain:
- The procedure for performing knurling
Circumstantial knowledge — detailed knowledge about:
- Observing safety precautions while performing knurling
- Safe handling of work tools, equipment and workpiece
Swali
What is the main purpose of performing knurling on a metal workpiece?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado