Sonzaschool
Rudi

Sekondari ya Kawaida · Kidato cha Nne · Amali · Automotive Engineering

Motor Vehicle Mechanics

Performing drilling

takriban dakika 3 kusoma

Majadiliano
Mada za sehemu hiiPerforming boringMada 2
  1. Performing drilling
  2. Performing reaming

Drilling is the process of making a round hole in a workpiece using a rotating cutting tool called a drill bit. On a lathe machine, drilling is performed by mounting the drill in the tailstock and feeding it into the rotating workpiece held in the chuck.

Purpose of Drilling on a Lathe Machine

Drilling creates holes for:

  • Bolt and screw holes during assembly and repair
  • Centering workpieces for further operations
  • Installing bearings and fasteners in vehicle components

Tools and Equipment Required

  • Lathe machine with accessories
  • Drill chuck and centre drill
  • Vernier calliper for measuring hole diameter
  • Depth gauge for measuring hole depth
  • Safety boots, gloves, safety glasses, and helmet

Safety Precautions

  • Wear safety boots to protect feet from falling objects
  • Wear safety glasses or clear glasses to protect eyes from metal chips
  • Wear gloves when handling rough or sharp workpieces
  • Put on a cap or helmet to protect the head
  • Ensure the workpiece is securely clamped in the chuck before drilling
  • Remove chips and debris using a brush, not bare hands
  • Keep loose clothing and hair away from moving parts

Step-by-Step Procedure for Drilling on a Lathe Machine

1. Prepare the workpiece Secure the workpiece firmly in the three-jaw chuck. Ensure it is centred and balanced to prevent vibration during drilling.

2. Select and mount the drill Choose the correct drill bit size for the required hole diameter. Insert the drill into the drill chuck and tighten securely. Mount the drill chuck into the tailstock barrel.

3. Align the drill with the workpiece Use the tailstock handwheel to move the drill until its tip touches the workpiece surface. Ensure the drill is directly aligned with the centre of the workpiece.

4. Set the cutting speed Adjust the lathe speed to the recommended rate for the material being drilled. Use slower speeds for hard metals and faster speeds for softer metals.

5. Start drilling Switch on the lathe and slowly feed the drill into the workpiece using the tailstock handwheel. Apply steady, even pressure. Allow the drill to cut its own way in — do not force it.

6. Control the drilling depth Stop feeding when the required depth is reached. Use the depth gauge to verify the depth of the hole.

7. Withdraw the drill Reverse the handwheel to withdraw the drill from the workpiece while the lathe is still running. This helps clear chips from the hole.

8. Measure the hole Use the vernier calliper to measure the diameter of the drilled hole. Compare with the required size and make adjustments if necessary.

9. Switch off and clean Switch off the lathe machine. Remove the workpiece and clean any chips or coolant from the machine and workpiece.

Common Mistakes to Avoid

  • Drilling without securing the workpiece properly — this causes vibration and inaccurate holes
  • Using the wrong drill speed — too fast causes overheating; too slow damages the drill
  • Forcing the drill into the workpiece — this breaks the drill bit
  • Drilling without wearing safety gear — metal chips can cause eye injuries

Real-life application

In Tanzania, drilling skills are essential for motor vehicle mechanics at garages and repair shops. For example, when a mechanic at a local garage in Arusha needs to repair a broken engine block or replace worn-out cylinder head bolts, they use a drilling operation on a lathe to create properly sized holes for new fasteners. This ensures the engine is reassembled safely and functions reliably, keeping vehicles running on Tanzanian roads.

Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa

Tathmini ya mchakato

The student should be able to:

  • Interpret drawings
  • Select tools and equipment
  • Perform boring
  • Deburr workpiece
  • Observe safety precautions
  • Clean tools and equipment
  • Store tools and equipment

Tathmini ya matokeo

Workpiece bored according to given technical specifications.

Tathmini ya maarifa

Method used — the student should explain how to:

  • Perform drilling on a lathe machine

Principles — the student should explain the principles of:

  • Drilling

Theories — the student should explain:

  • The procedure for drilling a workpiece

Circumstantial knowledge — detailed knowledge about:

  • Observing safety requirements while boring on lathe machine
  • Safe handling of work tools, equipment, and workpiece

Swali

Where is the drill mounted when performing drilling operations on a lathe machine?

Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.

Ingia ili kufanya mazoezi

Mwalimu

Umekwama? Niulize chochote kuhusu mada hii.

Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.

Ingia ili kuuliza

Majadiliano

Hakuna maswali bado

Ingia ili kuuliza
Inapakia majadiliano…