Mada za sehemu hiiPerforming drillingMada 3
- Performing hand drilling on plate
- Performing drilling on a bench drilling machine
- Counterboring drilled holes
A bench drilling machine is a stationary tool mounted on a workbench that makes accurate holes in metal, wood, or plastic. It is essential in workshop work because it provides stability and precision that hand drilling cannot achieve.
A bench drilling machine, also called a bench drill press, is a stationary machine used for drilling accurate and precise holes in various materials. It is commonly found in workshops and manufacturing settings.
The bench drilling machine has several important parts:
- Fixed Position: Securely mounted on a workbench or stand, making it stable and stationary.
- Drill Head: Houses the motor and spindle that holds the drill bit. It can be adjusted vertically to control hole depth.
- Work Table: A flat surface with adjustable height and angle for drilling holes at different orientations.
- Chuck: A three-jaw or four-jaw mechanism that securely holds the drill bit in place.
- Depth Stop: Allows you to set the drilling depth to ensure uniform hole depths in multiple workpieces.
- Speed Control: Some models offer variable speed control to adjust the rotational speed for different materials and hole sizes.
Always follow these safety rules when using the bench drilling machine:
- Examine the machine and make sure it is in good working order before using it.
- Check the power supply cable and plug for damage and replace if necessary. Do not repair damaged cables.
- Keep the power supply cable clear of the working area.
- Hold the machine at right angles (90°) to the workpiece.
- Use the correct size chuck key.
- Secure the chuck key to the lead with tape or non-conducting material.
- Hold the drilling machine securely before pressing the trigger switch.
- Use wooden strips underneath your workpiece to prevent damage to the workbench.
- Handle the machine carefully and place it on the bench where it cannot be knocked down.
- Clamp small workpieces in a vice or on the workbench before drilling them.
| Tools/Equipment | Materials | Safety Gears |
|---|---|---|
| Oil can, work bench, Bench vice, drill machine, Wire brush | Oil, Coolant, Cotton waste, workpiece, Drill bits | Safety Boots, Overall, Leather gloves, Safety goggles |
Follow these steps to drill a hole using a bench drilling machine:
Step 1: Select the Drill Bit Choose the correct drill bit for your material and the desired hole size. Ensure it is securely tightened in the chuck.
Step 2: Secure the Workpiece Clamp or secure the workpiece firmly to the work table to prevent movement during drilling. Ensure it is properly aligned with the intended drilling location.
Step 3: Set the Drilling Depth Adjust the depth stop or use the drill head's depth adjustment to set the drilling depth to the required measurement. This ensures consistent hole depths.
Step 4: Position the Workpiece Place the workpiece beneath the drill bit, aligning it with the intended drilling location.
Step 5: Adjust the Work Table Set the work table to the desired height and angle if needed to achieve the correct hole orientation.
Step 6: Power On Switch on the bench drilling machine using the power control.
Step 7: Start Drilling Lower the drill head slowly and steadily by turning the feed handle or lever. The drill bit will penetrate the workpiece, creating the hole. Maintain a firm grip on the feed handle for control.
Step 8: Monitor Drilling Keep a close eye on the drilling process to ensure the machine is running smoothly and the workpiece remains in place.
Step 9: Lift the Drill Head After completing the hole, raise the drill head by turning the feed handle or lever.
Step 10: Remove the Workpiece Carefully remove the workpiece from the work table.
Step 11: Power Off Turn off the bench drilling machine.
Suppose you need to drill three holes of 3mm, 6mm, and 9mm diameter in a flat bar measuring 100mm x 100mm x 10mm.
Procedure:
- Select a 3mm drill bit and tighten it in the chuck.
- Mark the positions for the three holes on the flat bar using a scriber and steel rule.
- Use a centre punch to make a starting point at each marked position.
- Clamp the flat bar securely to the work table using a bench vice.
- Set the depth stop to 10mm (the thickness of the flat bar).
- Start the machine and drill the first 3mm hole.
- Repeat for the 6mm and 9mm holes, changing the drill bit each time.
- Switch off the machine and remove the workpiece.
- Always use coolant when drilling metals to prevent overheating
- Start with a smaller drill bit and gradually enlarge the hole for cleaner results
- Check the drill bit regularly for sharpness
- Keep the work area clean and free of metal chips
In Tanzania, a mechanic at a local garage in Dar es Salaam or Arusha would use a bench drilling machine to repair agricultural equipment such as maize shellers or irrigation pump components. When a bolt hole becomes worn or damaged, the mechanic clamps the metal part to the drill press, selects the appropriate drill bit, and creates a new properly-sized hole to fit replacement fasteners, ensuring the equipment functions safely for farmers.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings
- Select tools, equipment, and materials
- Mark workpiece
- Cut workpiece to size
- Perform drilling on a bench drilling machine
- Observe safety precautions
- Clean tools, equipment, and work place
- Store tools, equipment, and workpiece
Tathmini ya matokeo
Drilled hole conforms to technical specifications.
Tathmini ya maarifa
Method used — the student should explain how to:
- Perform drilling process
- Calculate drill size and drilling speed
Principles — the student should explain the principles of:
- Drilling
- Selecting drilling speed
Theories — the student should explain:
- Drilling procedure
- Importance of coolant in drilling process
- Materials used to manufacture drill bits
- Drilling on a bench drilling machine
Circumstantial knowledge — detailed knowledge about:
- Safety precautions while performing the task
- Safe handling of tools and equipment
- Waste disposal
Swali
What is the primary function of a bench drilling machine in a workshop?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado