Mada za sehemu hiiServicing wiper and washer systemsMada 2
- Diagnosing the wiper and washer system
- Rectifying wiper and washer system
Diagnosing the Wiper and Washer System
The wiper and washer system keeps the windscreen clean by removing rain, dust, and dirt. When faults occur, a systematic diagnosis is needed to identify the exact problem and its cause before repair. This process involves checking the system's components, testing electrical circuits, and using proper diagnostic tools.
The system has three main mechanisms that work together to clean the windscreen.
Wiper Mechanism Components
These components enable the wipers to sweep across the windscreen:
- Wiper blades: Rubber blades that clean dust, dirt, and rain from the glass
- Wiper arms: Metal structures that hold the wiper blades and move back and forth
- Wiper motor: An electric motor that provides power to move the wiper arms
- Wiper linkages: Mechanical connections that transfer movement from the motor to the wiper arms
Washer Mechanism Components
These components allow the driver to spray cleaning fluid onto the windscreen:
- Washer tank: A reservoir that stores the windscreen washer fluid
- Washer pump: A small electric pump that pushes fluid from the tank through hoses to the nozzles
- Washer pipes: Flexible tubes that carry fluid from the tank to the nozzles
- Washer nozzles: Small spray outlets that direct fluid onto the windscreen
Control Mechanism Components
These components allow the driver to control the system:
- Wiper and washer switch: Found on the steering column or dashboard; turns wipers on/off, changes speed, and sprays washer fluid
- Relays: Control electricity flow to the wiper motor and washer pump
- Fuses: Protect the circuit from overcurrent
- Rain sensors (in modern vehicles): Automatically sense rain and turn on wipers without driver input
The system operates using power from the ignition feed through a fuse for protection against overcurrent.
Wiper operation:
- When the switch is OFF, no current flows and wipers stay in the park position
- When switched to LOW (Lo), current flows from terminal B to L, activating the low-speed winding
- When switched to HIGH (Hi), current flows from terminal B to P, energizing the high-speed winding for faster operation
- The wiper motor has two windings (L for low speed, P for high speed), and the C terminal is for ground
- When turned OFF, the motor continues running until wipers reach the park position
Washer operation:
- When the washer switch is activated, electricity flows to terminal W
- This activates the washer pump motor to spray fluid onto the windscreen
Follow these steps to diagnose faults in the wiper and washer system:
Preparation
- Select tools, equipment, and safety gear (PPE, multimeter, test light, screwdriver set, vehicle service manual)
- Observe all safety precautions
- Locate the wiper and washer circuit components
Visual Inspection
- Check for physical damage, corrosion, and loose connections on all components
Electrical Checks
- Check the fuse: Use a multimeter or test light to test for continuity; replace if blown
- Test the combination switch: Use a multimeter to check proper operation and continuity
Wiper System Diagnosis
- Test the relay activation and verify fuse continuity
- Check power supply and ground at the wiper motor terminals with ignition and switch ON
- If power is present but no movement occurs, apply battery voltage directly to the motor to confirm if it operates
Washer System Diagnosis
- Activate the washer switch and check voltage at the pump connector using a multimeter
- If power is present but pump is silent, test the pump directly with battery power
- Check if nozzles are clogged
- Inspect hoses for leaks or disconnections
Completion
- Note all identified faults
- Reinstall all removed parts
- Clean the working area and store tools as per workshop regulations
| S/No | Faults | Causes | Remedies |
|---|---|---|---|
| 1 | Wipers do not move | Faulty motor, blown fuse, bad connection | Replace fuse, replace motor, inspect wiring |
| 2 | Skipping wipers | Worn-out wiper blades | Replace wiper blades |
| 3 | Washer fluid not spraying | Clogged nozzles, low fluid level, faulty pump | Clean nozzles, refill fluid, repair or replace pump |
| 4 | Wipers move unexpectedly | Loose linkages, faulty motor, electrical faults | Fix linkages, repair or replace motor, check wiring |
Problem: A customer brings a car to your workshop in Dar es Salaam. The wipers do not move at all when turned on.
Diagnostic steps you would follow:
- First, check the fuse using a multimeter — if it shows no continuity, replace it
- Test the combination switch for voltage output using the multimeter
- Check for power and ground at the wiper motor terminals
- If power reaches the motor but it does not move, apply 12V directly to the motor terminals with jumper wires
- If the motor still does not work, the motor is faulty and needs replacement
This systematic approach ensures you identify the exact cause — whether it's a blown fuse, faulty switch, or damaged motor — before replacing any parts.
In Tanzania, taxi and daladala drivers rely on working wiper systems during the rainy season, especially on busy roads like Nelson Mandela Road in Dar es Salaam. A mechanic who can diagnose and repair wiper faults quickly helps drivers return to work safely. For example, if a driver's wipers stop working after heavy rains, a proper diagnosis might reveal a simple blown fuse (costing about TSh 5,000 to replace) rather than an expensive motor replacement, saving the driver both time and money.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and safety gear
- Interpret circuit diagrams of wiper and washer systems
- Identify and locate the components of the wiper and washer system
- Inspect the components of the wiper and washer system
- Test the components of components of wiper and washer system
- Observe safety
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Diagnosed faults of wiper and washer system are isolated as per technical specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to diagnose the wiper and washer system
Principles: The student should explain the principles involved in diagnosing wiper and washer systems
Theories: The student should explain:
- Functions of wiper and washer system
- Operation of wiper and washer system
- Components of wiper and washer system
- Application of wiper and washer system in vehicles
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions
- Manufacture’s service manual
Swali
Which component of the wiper system transfers movement from the motor to the wiper arms?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado