Mada za sehemu hiiPerforming fillingMada 3
- Performing flat filing
- Performing radii filing
- Performing angle filing
Radii Filing
Radii filing is the process of shaping curved surfaces (concave and convex curves) on a workpiece using various types of files. This skill is essential in auto-electric mechanics for fitting components, creating smooth transitions, and preparing surfaces for assembly.
Concave Radius (Cavity)
A curved surface that curves inward, like the inside of a circle. In auto-electric work, this is needed when fitting components into curved housings or creating channels for wiring.
Convex Radius (Bulge)
A curved surface that curves outward, like the outside of a circle. This is used when smoothing edges or creating rounded mounting surfaces for electrical components.
| Tool | Purpose |
|---|---|
| Flat file | General shaping and smoothing |
| Half-round file | Filing concave and convex surfaces |
| Round file | Creating small circular openings |
| File card | Cleaning file teeth |
| Steel rule | Checking the shape and size |
| Divider | Transferring and marking radii |
Step 1: Marking the Workpiece
- Use a steel rule to measure and mark the required radius on the workpiece
- Use a scriber or centre punch to mark the centre point of the radius
- Use a divider to draw the required arc or curve on the workpiece surface
- Mark clearly where material needs to be removed
Step 2: Selecting the Appropriate File
Choose a file that matches the radius you need to create:
- Half-round file: Best for general concave and convex radii
- Round file: For small internal radii
- Flat file: For larger, flatter curves
Step 3: Filing Technique
- Secure the workpiece firmly in a vice on the work bench
- Hold the file with both hands, applying even pressure
- For concave radii: Use the curved edge of a half-round file, moving along the length of the curve
- For convex radii: Use the rounded side of the file, maintaining consistent pressure
- File using long, even strokes in one direction only
- Lift the file on the return stroke to avoid damaging the surface
Step 4: Checking the Shape
- Use the steel rule or a template to check the curve
- Use a divider to compare your filed curve against the marked line
- Continue filing until the curve matches the required radius exactly
Step 5: Smoothing the Surface
- Use a finer file to remove marks left by rough filing
- Finish with emery cloth or a smooth file for a polished surface
- Clean the surface with a file card to remove metal particles
- Always wear safety clear glasses to protect eyes from metal particles
- Wear gloves to protect hands
- Wear safety boots for foot protection
- Secure the workpiece properly before filing
- Keep files clean and properly maintained
Task: File a concave radius of 15 mm on a metal plate for mounting an electrical component.
Solution:
-
Mark the workpiece: Measure 15 mm from the edge using a steel rule. Use a divider set to 15 mm to draw the required arc.
-
Select the file: Use a half-round file (the curved edge matches the concave shape).
-
File the material: Secure the plate in a vice. File along the marked arc, keeping the file perpendicular to the surface. Apply even pressure while moving the file forward.
-
Check progress: Use the divider to compare your filed curve with the marked line. Adjust filing as needed.
-
Finish: Use a finer file to smooth the surface, then clean with a file card.
In Tanzania, radii filing is used when repairing vehicle electrical systems, such as shaping metal brackets to fit new alternators or starters, or creating curved channels for wiring harnesses in vehicle bodywork. A mechanic at a garage in Dar es Salaam would use radii filing to modify a mounting plate so that a replacement electrical component fits properly, ensuring safe and reliable vehicle operation.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings
- Select tools and equipment
- Take measurements and marking
- File work piece
- File work piece
- Check for accuracy
- Observe safety precautions
- Clean tools, work piece and work place
- Store tools, equipment and work piece
Tathmini ya matokeo
radii filled work piece conforms to drawing and specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Mark work piece
- File work piece
- Grind work piece
Principles: The student should explain principles involved in performing radii filing
Theories: The student should:
- Explain applications of radii filled materials
- Proper use of files and equipment
Circumstantial knowledge:
Detailed knowledge about:
- First aid and safety regulations
- Workshop rules and regulations
Swali
What is a concave radius in radii filing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado